Abstract:Although nanostructures and oxide dispersion can reduce radiation-induced damage in materials and enhance radiation tolerance, previous studies prove that MoS2 nanocomposite films subjected to several dpa heavy ion irradiation show significant degradation of tribological properties. Even in YSZ-doped MoS2 nanocomposite films, irradiation leads to obvious disordering and damage such as vacancy accumulation to form lamellar voids in the amorphous matrix, which accelerates the failure of lubrication. However, after thermal annealing in vacuum, YSZ-doped MoS2 nanocomposite films exhibit high irradiation tolerance, and their wear duration remains unchanged and the wear rate was nearly three orders of magnitude lower than that of the as-deposited films after 7 dpa irradiation. This successful combination of anti-irradiation and self-adaptive lubrication mainly results from the manipulation of the nanosize and the change of composition by annealing. Compared with the smaller nanograins in as-deposited MoS2/YSZ nanocomposite films, the thermally annealed MoS2 nanocrystals (7–15 nm) with fewer intrinsic defects exhibited remarkable stabilization upon irradiation. Abundant amorphous nanocrystal phases in ion-irradiated thermally annealed films, where each has advantages of their own, greatly inhibit accumulation of voids and crack growth in irradiation; meanwhile, they can be easily self-assembled under induction of friction and achieve self-adaptive lubrication.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18864?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18864</a>.XRD, XPS peak fitting results, Raman spectra detailing the different positions of counterpart balls, chemical composition of as-deposited films, and fitting parameters and results of XPS (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18864/suppl_file/am0c18864_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Evolution of the structure and tribological behavior of the organic coatings under gamma-ray irradiation

Influence of the Gamma Irradiation Dose on Tribological Property of Polytetrafluoroethylene

Comparative study on microstructure, mechanical, and tribological property of gamma-irradiated polytetrafluoroethylene, polyetheretherketone, and polyimide polymers

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Influence of gamma irradiation-induced surface oxidation on tribological property of polyetheretherketone (PEEK)

Tribological Properties and Structure of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation

Effect of Gamma Irradiation on Friction and Wear Behavior of MoS<sub>2</sub>/Graphite Coatings in Vacuum

Study on Friction and Wear Properties in Vacuum for Γ-Ray Irradiated PTFE Coatings

Atomic oxygen resistance and tribological performance of a self-stratifying Polydimethylsiloxane-polyamide-imide/molybdenum disulfide lubricating coating

Research progress on the preparation of irradiation-resistant coating based on PVD technology

Effects of γ irradiation on the structure, physical and mechanical properties of a series of tetrafunctional epoxies modified DGEBA/DDS

MoS 2 Nanocomposite Films with High Irradiation Tolerance and Self-Adaptive Lubrication

Structural Evolution and Wear Resistance of MoS2–Based Lubricant Films Irradiated by Heavy Ions

Ultrahigh radiation resistance of nanocrystalline diamond films for solid lubrication in harsh radiative environments

Effect of Gamma Irradiation Dose on the Interface and Tribological Properties of Acrylonitrile–Butadiene–Styrene

MoS2 Nanocomposite Films with High Irradiation Tolerance and Self-Adaptive Lubrication

Superior tolerance of nanocrystalline diamond films to Heavy-ion Irradiation: Maintenance of solid lubrication properties

Wear Mechanisms of Untreated and Gamma Irradiated Ultra-High Molecular Weight Polyethylene for Total Joint Replacements

Irradiation effects on microstructure, mechanical properties, and lead-bismuth eutectic corrosion resistance of alumina coating

Tribological behaviors of oxygen-doped carbon coatings deposited by ion-irradiation-assisted growth

Tribological Behavior of Polytetrafluoroethylene Coatings Based on LY12 Substrates in the Space Environment