GPS/BDS triple-frequency cycle slip detection and repair based on moving window global search method

Jianying Wang,Dewu Huang

DOI: https://doi.org/10.1038/s41598-024-57063-5

IF: 4.6

2024-03-20

Scientific Reports

Abstract:Cycle slip detection and repair are crucial steps in achieving high accuracy in Global Navigation Satellite System (GNSS) data processing. The use of Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS) triple frequency observations allows for more accurate detection and repair of cycle slips compared to single or dual frequency. This study presents a moving window global search method by selecting three sets of combined coefficients to construct geometry-free (GF) models to minimize the influence of the ionosphere, using a moving window to update the standard deviation of cycle slip estimation, applying the "3 " criterion to constrain the range, and utilizing a global search method to detect and repair triple-frequency cycle slips. Through five sets of 1 Hz GNSS data experiments, the results demonstrate the effectiveness of this method in determining the position and size of triple-frequency cycle slips while avoiding multi-value problems. The detection success rate for GPS ranges from 98.0 to 100.0%, while BDS ranges from 92.0 to 100.0%. On average, GPS achieves a detection rate of 99.2%, and BDS reaches 96.7%, which is 0.8% and 1.8% higher than the direct rounding method, respectively. Compared to existing methods, it is also effective for the vast majority of small cycle slips within 2 cycles.

multidisciplinary sciences

What problem does this paper attempt to address?

The paper primarily addresses the issue of cycle slips in carrier phase observations during the processing of Global Navigation Satellite System (GNSS) data. Specifically, the paper proposes a new algorithm based on a moving window global search method for detecting and repairing cycle slips in triple-frequency observation data from the Global Positioning System (GPS) and the Chinese BeiDou Navigation Satellite System (BDS).

The key contributions of the paper are as follows:

1. **Moving Window Global Search Method**: This method constructs a Geometry-Free (GF) model by selecting three different sets of combination coefficients to minimize the impact of ionospheric effects. It updates the standard deviation of cycle slip estimates using a moving window and constrains the search range with the "3σ" criterion. Finally, it achieves simultaneous detection and repair of triple-frequency cycle slips using a global search method.

2. **Experimental Validation**: The proposed method's effectiveness was validated through experiments on five sets of 1 Hz GNSS data. The experimental results show that the method can accurately determine the location and magnitude of triple-frequency cycle slips, avoiding multi-value problems. For GPS, the detection success rate ranged from 98.0% to 100.0%; for BDS, it ranged from 92.0% to 100.0%. On average, the detection rate for GPS was 99.2%, and for BDS, it was 96.7%, which is 0.8% and 1.8% higher than the direct rounding method, respectively.

3. **Effectiveness for Small Cycle Slips**: Compared to existing methods, this method is also effective for most small cycle slips less than 2 cycles.

4. **Method Advantages**: Compared to other methods, this method offers a simpler model and superior detection capability. It eliminates the need to consider the integer characteristics of combined cycle slips and effectively separates small cycle slips from observation noise. It accurately constrains the real-time standard deviation of the cycle slip sequence and determines the location and magnitude of cycle slips on each frequency without external conditions.

In summary, the moving window global search method proposed in this paper provides a new solution to improve the accuracy and reliability of GNSS data processing, especially when dealing with triple-frequency observation data, showing significant advantages.