Abstract:The current technique of hydrogen generation and cooling production raises climatic problems, which calls for the investigation of cleaner alternatives. No research has been conducted to propose and analyze a solar thermal power cycle-based water electrolysis for on-site production of hydrogen and the detailed exergy analysis of a series flow double-effect absorption chilling machine employed for large solar cooling. In this regard, a helically coiled tube embedded central receiver is used in the heliostat field for the simultaneous production of solar cooling and green hydrogen to meet the increasing needs of energy and fuel sustainably. The combined system is composed of four sub-systems including a heliostat field, LiBr–H 2 O operated series-flow double effect absorption refrigeration cycle (DEARC), organic Rankine cycle (ORC), and proton exchange membrane (PEM) electrolyzer. The system was examined from energy and exergy perspectives in the Engineering Equation Solver (EES) using library data of REFPROP for obtaining the thermodynamic properties of working fluids. The results of the thermodynamic model for the combined system are validated. Furthermore, the effect of ambient temperature, solar irradiation, and type of ORC working fluid on the hydrogen and cooling production, and the overall energy and exergy efficiency of the combined system are examined. A computational fluid dynamics simulation applying ANSYS-FLUENT was used to examine how coil curvature ratio and coil torsion affect solar heat transfer fluid (SHTF) pressure and temperature leaving the receiver. The coil curvature ratio affects temperature increase more than coil torsion. Solar heat transfer fluid outlet temperature increases by 36.9 % when the coil curvature ratio increases from 0.063 to 0.095 at direct normal irradiations (DNI) 1200 W/m 2 , input temperature of 92°C, and coil torsion of 0.032. The response of the cogeneration cycle to varying operating parameters is examined. Application of R141b as the ORC fluid results in a large increase of cooling exergy efficiency from 14.98 % to 63.48 % when the ambient temperature is increased from 15 °C to 45 °C whereas the exergy efficiency of the combined system is marginally improved. The exergy distribution presents for ORC operating on R141b, out of 100 % input solar exergy, 16.42 % is generated as hydrogen exergy and 13.67 % cooling exergy, 66.79 % is the exergy destroyed, and the rest 3.12 % is exergy loss. Exergy analysis is utilized to identify the sources of losses in useful energy within the components of the system considered and provides a more realistic and meaningful assessment than the traditional energy analysis. The results justify a need for the promotion of exergy analysis through policy decisions in the context of the global energy and environment crisis.

Exergy, economic and environmental analyses of the renewable energy assisted hydrogen, cooling and electricity production: A case study

Evaluation of a concentrated solar power-driven system designed for combined production of cooling and hydrogen

Thermo-enviro-economic analysis of different power cycle configurations for green hydrogen production from waste heat

Exergo-economic assessment and sensitivity analysis of a solar-driven combined cooling, heating and power system with organic Rankine cycle and absorption heat pump

Energy and exergy analyses of hydrogen production via solar-boosted ocean thermal energy conversion and PEM electrolysis

Development of a geothermal-driven multi-output scheme for electricity, cooling, and hydrogen production: Techno-economic assessment and genetic algorithm-based optimization

Exergoeconomic evaluation and multi-objective optimization of a novel geothermal-driven zero-emission system for cooling, electricity, and hydrogen production: capable of working with low-temperature resources

An innovative geothermal based multigeneration plant: Thermodynamic and economic assessment for sustainable outputs with compressed hydrogen

Design, modeling and optimization of a renewable-based system for power generation and hydrogen production

Thermodynamic and thermoeconomic analysis and optimization of a renewable-based hybrid system for power, hydrogen, and freshwater production

Exergy-economic analysis of a solar-geothermal combined cooling, heating, power and water generation system for a zero-energy building

Energy, exergy, exergoeconomic, and exergoenvironmental analysis of an innovative solar-geothermal-gas driven polygeneration system for combined power, hydrogen, hot water, and freshwater production

Exergy, Economic, and Optimization of a Clean Hydrogen Production System Using Waste Heat of a Steel Production Factory

Thermodynamic performance assessment of ocean thermal energy conversion based hydrogen production and liquefaction process

Integration of geothermal-driven organic Rankine cycle with a proton exchange membrane electrolyzer for the production of green hydrogen and electricity

A key review on exergetic analysis and assessment of renewable energy resources for a sustainable future

Thermodynamic and economic analysis of an off–grid photovoltaic hydrogen production system hybrid with organic Rankine cycle

Energy-Exergy–Economic (3E) -Optimization Analysis of a Solar System for Cooling, Heating, Power, and Freshwater Generation System for a Case Study Using Artificial Intelligence (AI)

Exergy, exergoeconomic, and exergoenvironmental analyses of novel solar- and biomass-driven trigeneration system integrated with organic Rankine cycle

Solar-Powered Combined Cooling, Heating, and Power Energy System with Phase-Change Material and Water Electrolysis: Thermo-Economic Assessment and Optimization

Design and performance assessment of an OTEC driven combined plant for producing power, freshwater, and compressed hydrogen