Abstract:The carbon balance has been disrupted by the widespread use of fossil fuels and subsequent excessive emissions of carbon dioxide (CO2), which has become an increasingly critical environmental challenge for human society. The production and use of renewable energy sources and/or chemicals have been proposed as important strategies to reduce emissions, of which the electrochemical CO(2)tted by the capacity of manufacturing high-value-added products (e.g., ethylene, ethanol, formic acid, etc.) with a net-zero carbon emission, copper-based CO2RR/ CORR powered by sustainable electricity is regarded as a potential candidate for carbon neutrality. However, the diversity of selectivities in copper-based systems poses a great challenge to the research in this field and sets a great obstacle for future industrialization. To date, scientists have revealed that the electrocatalyst design and preparation play a significant role in achieving efficient and selective CO2-to-chemical (or CO-to-chemical) conversion. Although substantial efforts have been dedicated to the catalyst preparation and corresponding electrosynthesis of sustainable chemicals from CO2/CO so far, most of them are still derived from empirical or random searches, which are relatively inefficient and cost-intensive. Most of the mechanism studies have suggested that both intrinsic properties (such as electron states) and extrinsic environmental factors (such as surface energy) of a catalyst can significantly alter catalytic performance. Thus, these two topics are mainly discussed for copper-based catalyst developments in this Here, we provided a concise and comprehensive introduction to the well-established strategies employed for the design of copperbased electrocatalysts for CO2RR/CORR. We used several examples from our research group, as well as representative studies of other research groups in this field during the recent five years, with the perspectives of tuning local electron states, regulating alloy phases, modifying interfacial coverages, and adjusting other interfacial microenvironments (e.g., molecule modification or surface energy). Finally, we employed the techno-economic assessment with a viewpoint on the future application of CO2/CO electroreduction in manufacturing sustainable chemicals. Our study indicates that when carbon price is taken into account, the electrocatalytic CO2-to-chemical conversion can be more market-competitive, and several potential value-added products including formate, methanol, ethylene, and ethanol can all make profits under optimal operating conditions. Moreover, a downstream module employing traditional chemical industrial processes (e.g., thermal polymerization, catalytic hydrolysis, or condensation process) will also make the whole electrolysis system profitable in the future. These design principles, combined with the recent advances in the development of efficient copper-based electrocatalysts, may provide a low-cost and long-lasting catalytic system for a profitable industrial-scale CO2RR in the future.

Design and synthesis of magnesium-modified copper oxide nanosheets as efficient electrocatalysts for CO2 reduction

Enhanced Carbon Monoxide Electroreduction to >1 A cm-2 C2+ Products Using Copper Catalysts Dispersed on MgAl Layered Double Hydroxide Nanosheet House-of-Cards Scaffolds

Mg-Doped Cu Catalyst for Electroreduction of CO2 to Multicarbon Products: Lewis Acid Sites Simultaneously Promote *CO Adsorption and Water Dissociation

Silver Modified Copper Foam Electrodes for Enhanced Reduction of CO2 to C2+ products

Enhanced electroreduction of CO2 to C2+ products on heterostructured Cu/oxide electrodes

Nanostructured cobalt/copper catalysts for efficient electrochemical carbon dioxide reduction

Nanostructured Copper-Based Electrocatalysts for CO2 Reduction

Nanostructured Copper‐Based Electrocatalysts for CO2 Reduction

Creating interfaces of Cu0/Cu+ in oxide-derived copper catalysts for electrochemical CO2 reduction to multi-carbon products

Enhanced electroreduction of CO<sub>2</sub> to C<sub>2+</sub> products on heterostructured Cu/oxide electrodes

Nitrided copper-iron composite oxides derived from layered double hydroxides for enhanced carbon dioxide electroreduction to methane and formic acid

Oxidation-induced Restructuring of Copper Sulfides for Enhanced Performance in CO2 Electroreduction

Microwave‐Assisted Synthesis of Copper‐Based Electrocatalysts for Converting Carbon Dioxide to Tunable Syngas

Low‐coordination Nanocrystalline Copper‐based Catalysts through Theory‐guided Electrochemical Restructuring for Selective CO2 Reduction to Ethylene

Efficient Electroreduction CO2 to CO over MnO2 Nanosheets

(Invited) Effect of Nanostructure and Surface Chemistry on Activity and Selectivity of Cu-Based Electrocatalysts for Carbon Dioxide Reduction

Surface Dual-Modification of Nano-Cu2o for Controlling CO2 Electrochemical Reduction to Ethylene and Syngas

Mg-Doped Cu Catalyst for Electroreduction of CO 2 to Multicarbon Products: Lewis Acid Sites Simultaneously Promote *CO Adsorption and Water Dissociation

Aluminum-Doped Mesoporous Copper Oxide Nanofibers Enabling High-Efficiency CO 2 Electroreduction to Multicarbon Products

Tuning Structures and Microenvironments of Cu-Based Catalysts for Sustainable CO2 and CO Electroreduction

Isolated copper single sites for high-performance electroreduction of carbon monoxide to multicarbon products