Abstract:A newly developed method for the formation of nanowires by self-aggregation of nanoparticles is presented in this paper. Co3C, Co-rich, and Ni nanoparticles dispersed on holey carbon grids are inserted in a vacuum oven and are co-annealed with PolyChloroTriFluoroEthylene (PCTFE) at 375 degrees C. No external electric or magnetic fields were applied. High resolution electron microscopy (HREM) was extensively used to determine the shape, size distribution and crystallographic phase of the starting and produced materials. Interestingly, after an annealing circle of 72 hours, the nanoparticles seem to self-agglomerate into nanowires which have diameters in the 5-20 nm range and lengths exceeding at cases 1 micron. The diameter of the produced wires is in the same range as the diameter of the initial nanoparticles, further supporting the notion that the nanowires have formed out of nanoparticle agglomeration. Close inspection of nanowire HREM images shows that the core structure of nanowires wider than approximately 11 nm resembles linked nanoparticles. Phase identification performed using the HREM images reveals the core is of the same phase/material as the starting nanoparticles. Since nanowires appear to form over holes on the holey carbon grid, a base growth mechanism is proposed. The fluorocarbon vapour decomposes over the transitional metal nanoparticles and carbon tubules start growing. The nanoparticles appear to be trapped inside the tubules where their close proximity enhances their fusion into a continuous core. At the studied temperature, the nanoparticle fusion is seen to be limited by the size of the nanoparticles manifested by continuous cores only in the thin nanowires. The process presented here shows that nanoparticles can spontaneously self-align into nanowires in a way and to an extent never reported before. Therefore there is certainly scope for studying this method further to reveal more information about the catalytic action of transitional metals on hydrocarbons and the exact nanowire formation mechanism. Although it is currently a matter of speculation, this process might lead to the effortless growth of nanowires at particular places when building miniature circuits.

Multishelled Gold Nanowires

First principles study of structural and electronic properties of pentagonal and hexagonal noble metal nanowires

Nanowiring Light

Mechanical Property of Metallic Nanowires: the Shorter is Stronger and Ductile

Formation and manipulation of a metallic wire of single gold atoms

Nanometer-scale capacitors

Nanowires and Suspended Atom Chains from Metal alloys

Structure and stability of finite gold nanowires

Microtubule-Based Gold Nanowires and Nanowire Arrays

Atomistic Treatment of Periodic Gold Nanowire Array Nanofasteners under Shear Loading

Laser Assisted Welding of Gold Nanowires

Strong Hall-Petch Type Behavior in the Elastic Strain Limit of Nanotwinned Gold Nanowires

Gold Nanosprings Formed by Rolled-Up Technique

Metal nanoparticle wires formed by an integrated nanomolding-chemical assembly process: fabrication and properties.

Spontaneous self-agglomeration of magnetic nanoparticles into nanowires

Electromigration Lifetime of Penta-Twinned Gold Nanowires: Implications for Flexible Electronics

Local Clusters and Defects in One-Dimensional Gold Wires

Electromigration-Induced Evolution of Micromorphology and Electrical Properties in Gold Nanowires: Implications for Nanoelectronics

The Place of Gold in the Nano World

Au Nanowires Encapsulated in Carbon Nanotubes: Structure, Melting and Mechanical Properties

The Puzzling Stability of Monatomic Gold Wires