Simplified load-deflection analytical model for partially composite insulated concrete wall panels under flexural loading

Benedict Egbon,Douglas Tomlinson

DOI: https://doi.org/10.1016/j.engstruct.2024.117637

IF: 5.582

2024-02-16

Engineering Structures

Abstract:A typical insulated concrete wall panel consists of insulation sandwiched between two concrete wythes whose response is between that of a non and fully composite section, known as a partially composite section. The prediction of the load-deflection response for partially composite panels is not a straightforward process due to the shear contribution from the connectors. In this study, a simplified analytical model is developed to generate the load-deflection response of partially composite panels. The model uses strain compatibility and simplifies the moment-curvature relationship for non, fully, and intermediate levels of composite action. The model was validated with 32 experimental tests from literature where the panel properties were reported or could be traced to a previous publication. An average predicted strength to test ratio ( K ) of 1.06 with a coefficient of variation (COV) of 17.5% was obtained. A parametric analysis was performed to study the effect of the panel length, wythe thickness, reinforcement ratio, connector spacing and diameter, connector material (FRP and steel) and connector inclination on the strength and degree of composite action. The connector reinforcement ratio and inclination influenced the strength and degree of composite action to a larger extent than others.

engineering, civil