Abstract:To address the drawbacks of inadequate energy density as well as utilization effectiveness in solar energy utilization, phase change energy storage offers a possible option. However, the low thermal conductivity of traditional phase change materials (PCMs) restricts the extent to which solar energy utilization can be enhanced. In this paper, the impact of the metal foam (MF) on the solid–liquid interface, the flow field, the enhancement heat transfer mechanism during the paraffin wax (PX) melting process and thermal storage characteristics was analyzed. Besides, a three-dimensional mathematical model of MF-PX using the hybrid mesh technique was established and software ANSYS-FLUENT was used for simulation. The results indicated that, the hybrid mesh exhibited a reduction of 52.75 % in mesh count compared to the unstructured mesh, resulting in 45 % reduction in computational time. Moreover, the hybrid mesh also showcased improved mesh quality that the unstructured mesh was mainly distributed in the range of 0.48–0.6, while within the range of 0.84–1.0 for the hybrid mesh. More important, the maximum relative error between experimental and simulation was 8.67 %, indicating that the model can make a reasonable prediction. With the proportions of MF increased from 0.11 % to 0.43 %, both the Rayleigh number (Ra) and its amplification decreased. At 800 s, the Ra decreased from 1.76E+07 to 1.20E+07, while the amplification of the Ra was reduced from 1.88E+07 to 1.30E+07. In addition, the natural convection proportions of CMF decreased from 96.31 % to 80.65 %. These observations indicated that natural convection was the primary heat transfer mechanism, and the conduction was enhanced by the increasing proportion of MF. Finally, in terms of heat storage characteristics, the heat storage capacity and heat storage rate of the composite PCM slightly decreased. The heat storage values decreased from 19.30 kJ to 18.66 kJ. Similarly, the heat storage rates decreased from 19.86 J/s to 18.81 J/s.

Improved phase change performance of ultrasonic-assisted melting: A visualized experimental study

A New Model of Phase Change Process for Thermal Energy Storage

Studying the Performance of Phase Change Heat Storage Enhanced by Ultrasonic Energy

A Novel Indirect Visualization Method for Studying the Melting Heat Transfer of Nano-Enhanced Phase Change Materials Using Thermochromic Liquid Crystal Thermography

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental Investigation on Thermal Performance of Phase Change Materials–metal Foam Composites in Ocean Thermal Engine

Melting Performance Enhancement of Phase Change Material with Magnetic Particles under Rotating Magnetic Field

Comprehensive Study on Melting Process of Phase Change Material by Using Paraffin Coupled Finned Heating Plate for Heat Transfer Enhancement

Experimental investigation of the effect of rotating magnetic field on the melting performance enhancement of paraffin/nano-Fe 3 O 4 composite phase change material

Velocity field measurement and heat transfer characteristics of the melting process under constant heat flux

Performance Enhancement of Latent Thermal Energy System under Alternating Magnetic Field

Heat transfer performance of a phase-change material in a rectangular shell-tube energy storage tank

Multi-scale experimental analysis on the coupled effects of ultrasonic field and magnetic field on the melting and energy storage performances for hybrid nano-enhanced phase change materials

Study on melting process of latent heat energy storage system by nano-enhanced phase change material under rotation condition

Experimental Investigation of PCM Melting with Graphite/aluminum Alloy “sandwich” Plate of High Thermal Conductivity

Nanoparticles to Enhance Melting Performance of Phase Change Materials for Thermal Energy Storage

Numerical study of heat transfer characteristics of phase change materials reinforced with porous media based on hybrid mesh

COMPARISON ON ENHANCED PHASE CHANGE HEAT TRANSFER OF LOW MELTING POINT METAL MELTING USING DIFFERENT HEATING METHODS

Improving the phase change properties of paraffin wax by regulating the pore structure and surface properties of silica aerogel

Effect of partial cooling-heating configurations on the enhanced latent thermal energy storage performance

Study of melting behavior of phase change material in a square enclosure with constant and variable heat flux at different wall heating conditions: A numerical approach