Abstract:The release of microplastics (MPs) especially those with sizes less than 10 μm from effluent of wastewater treatment plants (WWTPs) is one of the major sources of plastics into aquatic environment. To reduce the discharge of MPs into environment, it is essential to further enhance their removal efficiencies in WWTPs. In present study, to boost the removal performance of MPs in sand filtration systems (units that commonly employed in WWTPs to remove colloidal pollutants), six types of biochar fabricated from three raw biomass materials (i.e. lignin, cellulose, and woodchips) at two pyrolysis temperatures (400 °C and 700 °C) was respectively amended into sand columns as thin permeable layer. We found that adding all six types of biochar into sand columns as thin permeable layer could greatly improve the retention of MPs with the diameter of 1 μm under either slow (4 m/d) or fast flow rates (160 m/d) due to the high adsorption capability of biochar. Woodchip-derived biochar exhibited the highest MPs retention performance, which was followed by cellulose-derived biochar and then lignin-derived biochar. Moreover, for biochar derived from three raw biomasses, increasing pyrolysis temperature could improve MPs retention performance. The direct observation of real-time plastics retention processes on different types of biochar via a visible flow chamber showed that woodchip-derived biochar especially that fabricated at 700 °C exhibited more MPs trapping processes relative to lignin and cellulose-derived biochar due to their more complex surface morphology. Thus, the highest MPs retention performance was achieved in sand columns with amendment by 1 wt% woodchip-derived biochar fabricated at 700 °C. More importantly, we found that for these modified sand filtration column systems, complete MPs removal could be achieved in real river water and actual sewage water, in multiple filtration cycles, longtime filtration process (100 pore volumes injection) as well as with interval flow conditions. Moreover, biochar could be regenerated and reused as thin permeable layer to effectively remove MPs. The results of this study clearly showed that biochar especially woodchip-derived biochar fabricated at 700 °C had the potential to immobilize MPs especially those with small sizes in WWTPs.

Enhanced microplastics removal from sewage effluents via CTAB-modified magnetic biochar: Efficacy and environmental impact

Cetyl trimethyl ammonium bromide-modified magnetic biochar-integrated sand filter for microplastics removal from secondary-treated sewage effluents: Performance evaluation and mechanistic insights

Removal of Nanoplastics from Aqueous Solution by Aggregation Using Reusable Magnetic Biochar Modified with Cetyltrimethylammonium Bromide

Addition of biochar as thin preamble layer into sand filtration columns could improve the microplastics removal from water.

Efficient removal of microplastics from aqueous solution by a novel magnetic biochar: performance, mechanism, and reusability

Enhanced adsorption of polystyrene nanoplastics by cetyltrimethylammonium bromide surface-modified magnetic rice straw biochar: Efficient performance and adsorption mechanisms

Differential effects of polystyrene microplastics on the adsorption of cadmium and ciprofloxacin by tea leaf litter-derived magnetic biochar: Influencing factors and mechanisms

Enhancing the removal efficiency of microplastics in drinking water treatment

Effective removal of microplastics by filamentous algae and its magnetic biochar: Performance and mechanism

In Situ Synthesis of Micro-Plastics Embedded Sewage-Sludge Co-Pyrolyzed Biochar: Implications for the Remediation of Cr and Pb Availability and Enzymatic Activities from the Contaminated Soil

Removal of microplastics from aqueous media using activated jute stick charcoal

Coagulative removal of microplastics from aqueous matrices: Recent progresses and future perspectives

Recent advances on microplastics pollution and removal from wastewater systems: A critical review

Urban wastewater disinfection by FeCl3-activated biochar/peroxymonosulfate system: Escherichia coli inactivation and microplastics interference

Preparation and application of metal-modified biochar in the purification of micro-polystyrene polluted aqueous environment

Adsorption efficiency and in-situ catalytic thermal degradation behaviour of microplastics from water over Fe-modified lignin-based magnetic biochar

Carbon-Based Adsorbents for Microplastic Removal from Wastewater

Adsorption and thermal degradation of microplastics from aqueous solutions by Mg/Zn modified magnetic biochars

Exploring the potential of biochar for the remediation of microbial communities and element cycling in microplastic-contaminated soil

Long-term presence of microplastics in aerobic and anaerobic sequential batch reactors: Effect on treatment, microbial diversity, and microplastics morphology

Occurrence, Fate, and Removal of Microplastics in Sewage Treatment Plants (STPs)