Abstract:As a multiple proton-coupled electron transfer process, photocatalytic conversion of CO2 usually produces a wide variety of products. Improving the yield and selectivity of CO2 to the single product is still a significant challenge. In this work, we describe that the rationally constructed W18O49/Cu2O{111} interfaces achieve highly selective CO2 photocatalytic conversion to CH4. In situ Fourier transform infrared spectroscopy measurements reveal that the formation of W18O49/Cu2O{111} interfaces restrains the desorption of CO* intermediates in CO2 photocatalytic conversion. UPS spectra, PL spectra, and photocurrent curves show that more photogenerated electrons are excited and transferred to W18O49/Cu2O{111} interfaces. All of these play critical roles in CH4 production. As an outcome, the yield rate of CO2 photocatalytic conversion to CH4 was enhanced from 6.5 to 17.20 μmol g–1 h–1 with selectivity as high as 94.7%. The work demonstrates the feasibility and versatility of interface engineering in achieving highly selective CO2 photocatalytic conversion.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c11072?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c11072</a>.Methods to prepare Cu2O electrode substrates and the three types of W18O49-loaded Cu2O; photoelectrochemical measurements and in situ FTIR measurements; DFT calculations; calculation method of Cu2O{111}/{100}; HR-TEM analysis; EDS analysis; XPS analysis; UV–vis analysis; Raman analysis; yield rate of CO2 conversion products; and yield rate change with irradiation time (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c11072/suppl_file/am0c11072_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to increase the yield and selectivity in the process of photocatalytic conversion of carbon dioxide (\( \text{CO}_2 \)) into methane (\( \text{CH}_4 \)). Specifically, the researchers achieve this goal by constructing the \( \text{W}_{18}\text{O}_{49}/\text{Cu}_2\text{O}\{111\} \) interface. These interfaces can effectively inhibit the desorption of \( \text{CO}^* \) intermediates, thereby reducing the production of \( \text{CO} \) and promoting the production of \( \text{CH}_4 \). Through this interface - engineering method, the researchers hope to achieve highly selective conversion of \( \text{CO}_2 \) into \( \text{CH}_4 \) during the photocatalytic process. ### Key Point Summary: 1. **Problem Background**: - Photocatalytic \( \text{CO}_2 \) conversion usually produces multiple products, which makes it a challenge to increase the yield and selectivity of specific products. - The desorption of \( \text{CO}^* \) intermediates on the active sites will lead to the production of \( \text{CO} \), while the combination of \( \text{CO}^* \) with photogenerated electrons (\( e^- \)) and hydrogen ions (\( \text{H}^+ \)) is conducive to the production of \( \text{CH}_4 \). 2. **Solution**: - Construct the \( \text{W}_{18}\text{O}_{49}/\text{Cu}_2\text{O}\{111\} \) interface. Through these interfaces, inhibit the desorption of \( \text{CO}^* \) intermediates, thereby reducing the production of \( \text{CO} \). - Enhance the transfer of photogenerated electrons through interface engineering and increase the production rate of \( \text{CH}_4 \). 3. **Experimental Results**: - The formation of the \( \text{W}_{18}\text{O}_{49}/\text{Cu}_2\text{O}\{111\} \) interface significantly increases the yield of \( \text{CH}_4 \), from 6.5 μmol g\(^{-1}\) h\(^{-1}\) to 17.20 μmol g\(^{-1}\) h\(^{-1}\), with a selectivity as high as 94.7%. - In - situ Fourier transform infrared spectroscopy (FTIR) measurements show that these interfaces can adsorb \( \text{CO}^* \) intermediates more firmly, reducing their desorption and thus reducing the production of \( \text{CO} \). 4. **Conclusion**: - By constructing the \( \text{W}_{18}\text{O}_{49}/\text{Cu}_2\text{O}\{111\} \) interface, the product distribution of photocatalytic \( \text{CO}_2 \) conversion can be effectively regulated, and the selectivity and yield of \( \text{CH}_4 \) can be increased. - This work demonstrates the feasibility and universality of interface engineering in achieving highly selective photocatalytic \( \text{CO}_2 \) conversion.

Tuning W 18 O 49 /Cu 2 O{111} Interfaces for the Highly Selective CO 2 Photocatalytic Conversion to CH 4

Urchinlike W 18 O 49 /g-C 3 N 4 Z-Scheme Heterojunction for Highly Efficient Photocatalytic Reduction of CO 2 under Full Spectrum Light

Controlled Synthesis of Cu 0 /Cu 2 O for Efficient Photothermal Catalytic Conversion of CO 2 and H 2 O

Selective Conversion of CO2 to CH4 Enhanced by WO3/In2O3 S‐scheme Heterojunction Photocatalyst with Efficient CO2 Activation

Engineering Catalytic Interfaces in Cu δ+ /CeO 2 -TiO 2 Photocatalysts for Synergistically Boosting CO 2 Reduction to Ethylene

Accelerating Photoelectric CO2 Conversion with a Photothermal Wavelength-Dependent Plasmonic Local Field

Photothermal Conversion of CO 2 with Tunable Selectivity Using Fe-Based Catalysts: From Oxide to Carbide

Selective visible-light-driven photocatalytic CO2 reduction to CH4 mediated by atomically thin CuIn5S8 layers

CO2 Enrichment Boosts Highly Selective Infrared-Light-Driven CO2 Conversion to CH4 by UiO-66/Co9S8 Photocatalyst

Enhanced Photocatalytic CO 2 Reduction with Photothermal Effect by Cooperative Effect of Oxygen Vacancy and Au Cocatalyst

Assembling Ultrafine TiO2 Nanoparticles on UiO-66 Octahedrons to Promote Selective Photocatalytic Conversion of CO2 to CH4 at a Low Concentration

Isolation of Cu Atoms in Pd Lattice: Forming Highly Selective Sites for Photocatalytic Conversion of CO2 to CH4

Synergy Effect between Facet and Zero-Valent Copper for Selectivity Photocatalytic Methane Formation from CO 2

Selective Photocatalytic Reduction of CO 2 to CH 4 Modulated by Chloride Modification on Bi 2 WO 6 Nanosheets

Asymmetric Cu(I)─W Dual-Atomic Sites Enable C─C Coupling for Selective Photocatalytic CO2 Reduction to C2H4

Achieving Almost 100% Selectivity in Photocatalytic CO2 Reduction to Methane via In-Situ Atmosphere Regulation Strategy

Designed synthesis of Cu2O quantum dots/TiO2 nanotubes heterostructure as a photocatalyst for converting CO2 to CH4

Photo-thermal Cooperation for the Conversion of CO2 and CH4 with H2O to C2 Oxygenates over SrTiOx Supported CuCo

Enhanced Photocatalytic CO2 Reduction to CH4 Via Restorable Surface Plasmon and Pdn-Wδ+ Synergetic Sites

Photothermal Conversion of CO2 with Tunable Selectivity Using Fe-Based Catalysts: from Oxide to Carbide

Photocatalytic Conversion of CO 2 to Acetic Acid by CuPt/WO 3 : Chloride Enhanced C-C Coupling Mechanism