Abstract:The European X-ray Free Electron Laser (European XFEL) is a cutting-edge user facility that generates per second up to 27,000 ultra-short, spatially coherent X-ray pulses within an energy range of 0.26 to more than 20 keV. Specialized instrumentation, including various 2D X-ray detectors capable of handling the unique time structure of the beam, is required. The one-megapixel AGIPD (AGIPD1M) detectors, developed for the European XFEL by the AGIPD Consortium, are the primary detectors used for user experiments at the SPB/SFX and MID instruments. The first AGIPD1M detector was installed at SPB/SFX when the facility began operation in 2017, and the second one was installed at MID in November 2018. The AGIPD detector systems require a dedicated infrastructure, well-defined safety systems, and high-level control procedures to ensure stable and safe operation. As of now, the AGIPD1M detectors installed at the SPB/SFX and MID experimental end stations are fully integrated into the European XFEL environment, including mechanical integration, vacuum, power, control, data acquisition, and data processing systems. Specific high-level procedures allow facilitated detector control, and dedicated interlock systems based on Programmable Logic Controllers ensure detector safety in case of power, vacuum, or cooling failure. The first 6 years of operation have clearly demonstrated that the AGIPD1M detectors provide high-quality scientific results. The collected data, along with additional dedicated studies, have also enabled the identification and quantification of issues related to detector performance, ensuring stable operation. Characterization and calibration of detectors are among the most critical and challenging aspects of operation due to their complex nature. A methodology has been developed to enable detector characterization and data correction, both in near real-time (online) and offline mode. The calibration process optimizes detector performance and ensures the highest quality of experimental results. Overall, the experience gained from integrating and operating the AGIPD detectors at the European XFEL, along with the developed methodology for detector characterization and calibration, provides valuable insights for the development of next-generation detectors for Free Electron Laser X-ray sources.

Detector Development for the European XFEL: Requirements and Status

Status of detector development for the European XFEL

Status of the laboratory infrastructure for detector calibration and characterization at the European XFEL

Characterization of the ePix100a and the FastCCD Semiconductor Detectors for the European XFEL

Operational experience with Adaptive Gain Integrating Pixel Detectors at European XFEL

Design of the AGIPD Sensor for the European XFEL

The 1-Megapixel pnCCD Detector for the Small Quantum Systems Instrument at the European XFEL: System and Operation Aspects

The Adaptive Gain Integrating Pixel Detector at the European XFEL

Performance of an LPD prototype detector at MHz frame rates under Synchrotron and FEL radiation

Detector developments for photon science at DESY

Study of X-ray radiation damage in the AGIPD sensor for the European XFEL

Probing the potential of CdZnTe for high-energy high-flux 2D X-ray detection using the XIDer incremental digital integrating readout

Detector Challenges of the strong-field QED experiment LUXE at the European XFEL

Megapixels @ Megahertz – The AGIPD high-speed cameras for the European XFEL

Hard X‐ray operation of X‐ray gas monitors at the European XFEL

X-CSIT: a toolkit for simulating 2D pixel detectors

A 1D imaging soft X-ray spectrometer for the small quantum systems instrument at the European XFEL

Compact single-shot electro-optic detection system for THz pulses with femtosecond time resolution at MHz repetition rates

2D Detectors for Particle Physics and for Imaging Applications

Novel sensor developments for photon science at the MPG semiconductor laboratory

Turning European XFEL raw data into user data