Abstract:Recycled demolition waste (RDW) and ground granulated blast furnace slag-fly ash-based geopolymer (GFG) are promising materials for treating high-plasticity clay (CH) in highway subgrades. However, the underlying synergistic stabilization mechanisms remain unclear. To elucidate the fundamental mechanisms governing post-treatment soil stabilization, a multi-scale laboratory investigation was undertaken. This investigation encompassed the evaluation of mechanical properties (compaction, California bearing ratio (CBR), and unconfined compressive strength (UCS)) to quantify the enhanced performance of the treated soil. Additionally, microstructural and mineralogical characterization was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and atomic force microscopy (AFM) to elucidate the microscopic mechanisms responsible for this improvement. The results indicated that the addition of RDW led to a reduction in the optimum moisture content (OMC) while increasing the maximum dry density (MDD) of CH. Moreover, upon incorporating RDW-GFG, the mechanical properties of the cured soil exhibited significant improvement. Specifically, the addition of 25% RDW to CH resulted in a 184% increase in CBR and effective improvement in water stability (immersion swelling percentage is reduced). Furthermore, when 25% RDW and 15% GFG were added to CH, the UCS has increased significantly by 8 times. The addition of RDW effectively enhanced the particle size distribution, compacted the soil, thus increased the shear strength. The results from XRD and SEM analyses revealed that the inclusion of GFG could generate geopolymer cementitious bonding network in the soil matrix. These materials facilitated bonding between CH particles and RDW, filling the pores and densifying the overall structure, thus increasing its strength. The synergy of RDW-GFG substantially improved the highly plastic soil through physicochemical actions, markedly elevating both its strength and water stability. Consequently, the outcomes of this experimental study offer valuable insights for road engineering applications.

Sustainable regenerated binding materials (RBM) utilizing industrial solid wastes for soil and aggregate stabilization

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

High industrial solid waste road base course binder: Performance regulation, hydration characteristics and practical application

Preliminary Feasibility Investigation on Reutilization of Recycled Crushed Clay Bricks from Construction and Demolition Waste for Cement-Stabilized Macadam

Sustainable stabilization/solidification of the Pb, Zn, and Cd contaminated soil by red mud-derived binders

Investigation on properties and mechanism of non-calcined Bayer red mud-phosphogypsum cementitious binder

Reuse of soil-like material solidified by a biomass fly ash-based binder as engineering backfill material and its performance evaluation

Study on the Performance of Recycled Cement-Stabilized Macadam Mixture Improved Using Alkali-Activated Lithium Slag–Fly Ash Composite

Synergistic effects of recycled demolition waste and GGBS-FA based geopolymers on the mechanical properties and stabilization mechanism of high plasticity clay

Synergetic Mechanism of Multiple Industrial Solid Waste-Based Geopolymer Binder for Soil Stabilization: Optimization Using D-Optimal Mixture Design

Utilization of red mud for producing a high strength binder by composition optimization and nano strengthening

Utilization of red mud in high-performance grouting material for semi-flexible pavement

Research on the hydration process of solid waste–based cementitious materials and application in roadbase

Strength performance and enhancement mechanism of silty sands stabilized with cement, red mud, and phosphogypsum

The Role of a New Stabilizer in Enhancing the Mechanical Performance of Construction Residue Soils

Feasibility of Reusing Marine Dredged Clay Stabilized by a Combination of By-Products in Coastal Road Construction

Stabilization of soft soil using low-carbon alkali-activated binder

Solidification and field assessment of soft soil stabilized by a waste-based binder using deep mixing method

The synergistic hydration mechanism and environmental safety of multiple solid wastes in red mud-based cementitious materials

Experimental Investigation on Red Mud from the Bayer Process for Cemented Paste Backfill

Resilient and permanent deformation behaviors of construction and demolition wastes in unbound pavement base and subbase applications