Abstract:Piezoelectric composites made of piezoelectric ceramic particles and polymer composites combine the performance advantages of both components and have broad application prospects. However, the preparation of complex structures is still a challenge, for which 3D printing technology provides a perfect solution. The aim of the present study is to investigate the principle and process optimization of the stereolithography of 0–3 type piezoelectric composites through simulation and experiments. In particular, a modified three-phase model of a spherical shell is applied to elucidate the influence of the elastic modulus between the ceramic particles and the matrix on the piezoelectric properties of the composites at the macroscopic level. This enables the piezoelectric properties of the composites to be predicted more accurately, and guides the surface grafting modification of piezoelectric ceramic powders. Furthermore, the problem of weak interface bonding in piezoelectric composites caused by poor compatibility between hydrophilic particles and the hydrophobic matrix is successfully solved by preprocessing the PZT ceramic powder via activating the particle surface hydroxyl groups and grafting a silane coupling agent onto the piezoelectric ceramic powder. As a result, the particles are bonded to the matrix by covalent bonds, which increases the elastic modulus of the interface transition layer and modifies the stress transfer efficiency. For instance, the piezoelectric strain constant ( d 33 ) of piezoelectric composite containing 60 wt% functionalized PZT particles is increased from 20 to 37 pC/N. The printing accuracy, piezoelectric properties, and mechanical characteristics of the piezoelectric composites are thoroughly investigated, and the reliability of the proposed theoretical model and simulation results is verified. The piezoelectric composites are uniformly compact and have a low residual pore rate. The piezoelectric composite with a solid content of 60 wt% has a volume density of 2.27 g/cm3 and a Young's modulus of 535.44 MPa. Most importantly, its piezoelectric voltage constant ( g 33 ) is 167.2 × 10−3 Vm/N, which is more than seven times higher than that of homogeneous PZT and results in high voltage sensitivity.

3D Printing and Biomedical Applications of Piezoelectric Composites: A Critical Review

3D Printed Polymer Piezoelectric Materials: Transforming Healthcare through Biomedical Applications

A Review on Recent Advances in Piezoelectric Ceramic 3D Printing

3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering

Review of the applications of 3D printing technology in the field of piezoelectric ceramics

3D Bioprinting: an Emerging Technology Full of Opportunities and Challenges

3D Bioprinting: A Novel Avenue for Manufacturing Tissues and Organs

Biopolymer Composites Material Extrusion and their Applications: A Review

Promising New Horizons in Medicine: Medical Advancements with Nanocomposite Manufacturing via 3D Printing

A Review on 3D Printing Processes in Pharmaceutical Engineering and Tissue Engineering: Applications, Trends and Challenges

Piezoelectric Composites: State-of-the-Art and Future Prospects

3D printed barium titanate/calcium silicate composite biological scaffold combined with structural and material properties

3D printed 0–3 type piezoelectric composites with high voltage sensitivity

Progress in the development of piezoelectric biomaterials for tissue remodeling

3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances

A comprehensive review on applications of 3D printing in natural fibers polymer composites for biomedical applications

Piezoelectric Biomaterials Inspired by Nature for Applications in Biomedicine and Nanotechnology

Recent developments and challenges of 3D bioprinting technologies

Smart piezoelectric biomaterials for tissue engineering and regenerative medicine: a review

Recent advances in 3D printing of biomaterials

3D Bioprinting: from Benches to Translational Applications.