Abstract:This paper is focused on the study of the dynamic behaviour of two large arch dams, and it presents some innovations for the improvement of Seismic and Structural Health Monitoring (SSHM) systems for dams. The work describes a methodology based on the integrated use of software for automatic monitoring data analysis and of computational 3D finite element (3DFE) models for dam dynamic behaviour simulation. The monitoring data analysis software was developed for automatic modal identification, in order to obtain natural frequencies and mode shapes, for automatic detection of vibrations induced by seismic events, to be distinguished from those caused by other operational sources, and for comparison between results retrieved from measured vibrations and numerical results from 3DFE modelling. The numerical simulations are carried out using a 3DFE program developed for dynamic analysis of dam-reservoir-foundation systems, based on a solid–fluid coupled formulation and considering the dam-water dynamic interaction, including calculation modules for complex modal analysis and for linear and non-linear seismic analysis. The case studies are two large arch dams that have been under continuous dynamic monitoring over the last ten years: Cabril dam (132 m high), the highest dam in Portugal, and Cahora Bassa dam (170 m high), in Mozambique, one of the highest dams in Africa. The SSHM systems installed in both dams have similar schemes and were designed to continuously record accelerations in several locations at the upper part of the dam body and near the dam-foundation interface, using uniaxial and triaxial accelerometers. The most significant experimental results from continuous dynamic monitoring are presented and compared with numerical results for both dams, with emphasis on the evolution of natural frequencies over time, including the vibration mode shapes for various water levels, and on the measured accelerations during low-intensity seismic events. Furthermore, the main results of non-linear seismic response simulations are provided, considering the effects due to joint movements and tensile and compressive concrete damage, aiming to assess the seismic performance of both dams based on the Endurance Time Analysis method.

Structural health assessment of existing dams based on non-destructive testing, physics-based models and machine learning tools

Dynamic structural health monitoring for concrete gravity dams based on the Bayesian inference

Integrated analysis of instrumentation data for structural health assessment and behavior prediction of arch dams

Health assessment of dams under various environmental conditions using structural health monitoring techniques: a state-of-art review

Dam safety assessment through data-level anomaly detection and information fusion

Seismic and structural health monitoring systems for large dams: theoretical, computational and practical innovations

Recent advancement of concrete dam health monitoring technology: A systematic literature review

Unsupervised Domain Adaptation Damage Identification Approach of High Arch Dams after Earthquakes

Data-driven crack behavior anomaly identification method for concrete dams in long-term service using offline and online change point detection

A combined finite element and deep learning network for structural dynamic response estimation on concrete gravity dam subjected to blast loads

Predicting the Dynamic Behaviour of a Concrete Dam using Statistical and Machine Learning Models

Structural Health Monitoring and Inspection of Dams Based on UAV Photogrammetry with Image 3D Reconstruction

A hybrid structural health monitoring approach for damage detection in steel bridges under simulated environmental conditions using numerical and experimental data

Structural health monitoring of concrete dams using long-term air temperature for thermal effect simulation

A neural network based digital twin model for the structural health monitoring of reinforced concrete bridges

Experimental Investigations on Seismic Damage Monitoring of Concrete Dams Using Distributed Lead Zirconate Titanate Sensor Network

Structural health monitoring system of bridges

Feasibility of Applying Phase-Based Video Processing for Modal Identification of Concrete Gravity Dams

Data-Driven Structural Health Monitoring Approach Using Guided Lamb Wave Responses

Structural Health Monitoring Issues Using Inclinometers on Prestressed Concrete Girder Bridge Decks

Structural identification of super high arch dams using Gaussian process regression with improved salp swarm algorithm