Abstract:Here, we describe a system for measuring triple oxygen and hydrogen isotopic ratios of both the liquid and vapour during evaporation of water in a dry gas stream (N2 or dry air) at constant temperature and relative humidity (RH).&#160; The hardware consists of a polymer glove box (COY), peristaltic pump (Ismatec), and Picarro L2140-i cavity ring-down laser spectrometer (CRDS) with Standard Delivery Module (SDM). Liquid water from the evaporation pan is sampled via a closed recirculating loop and syringe pump that delivers a constant rate of water to the vaporizer, maintaining a constant concentration of water vapour in the cell (20,000 &#177;103, 1 s.d.) over an injection cycle. Liquid measurements alternate with vapour from the glove box which is introduced to the CRDS using a diaphragm gas pump. Important for high-precision measurements, both cavity pressure and outlet valve stability are maintained throughout the liquid injection and subsequent vapour phase. Experiments are bookended by two in-house standards which are calibrated to the SMOW-SLAP scales. An additional drift corrector is introduced periodically.&#160;To test the precision and stability of the liquid injections, we sampled from an isotopically homogeneous volume of water and introduced it to the cavity over a period of ~48h. To minimise the standard deviation derived from noise, we chose an optimum integration time of ~2000s (~33 minutes) based on &#963;Allan minimisation. Therefore, for combined liquid-vapour experiments we use an injection/vapour sampling window of 40-minutes (140ug water is consumed per injection), which provides a data collection period of 33-minutes after a 7-min waiting time for equilibration.&#160;Across a single liquid injection, the mean standard error for d17O, d18O, and dD is 0.008&#8240;, 0.007&#8240;, and 0.02&#8240;, respectively. For the vapour phase equivalent, the mean standard error for d17O, d18O, and dD is 0.01&#8240;, 0.009&#8240;, 0.03&#8240; respectively. For the d-excess in the liquid and the vapour across one 33-minute cycle, the standard error is 0.07&#8240; and 0.08&#8240;, respectively. For the O17-excess in the liquid and the vapour across one 33-minute cycle, the standard error is 6 per meg and 8 per meg, respectively.&#160;A single evaporation experiment produces in excess of 100,000 measurements each of d17O, d18O, and dD for both the evaporating liquid and resulting vapour. These measurements result in 95% confidence limits for the slope of ln(d17O+1) vs ln(d18O+1) of &#177;0.0002 and &#177;0.0003 for the liquid and vapour, respectively.&#160; For the slope of ln(dD+1) vs ln(d18O+1) we obtain a 95% confidence interval of &#177;0.001 and &#177;0.002 for the liquid and vapour, respectively. The experimental method permits measurement of fractionation of triple oxygen and hydrogen isotopes of water under varying experimental conditions (e.g., RH, temperature, turbulence) at very high precision. It will be useful for testing numerical models of evaporation and conducting experiments to simulate evaporation and isotopic equilibration in natural systems. An application to closed-basin lakes will be presented.

Pipeline Design for Venus Mass Spectrometer Using Axial Dispersion Residence Time Distributions

Gas Modifier Assisted Re-Circulation Mode High-Field Asymmetric Waveform Ion Mobility Spectrometry (FAIMS)

In-Line Dopant Generation for Atmospheric Pressure Ionization Mass Spectrometry

Simulation of Rarefied Gas Flows in Atmospheric Pressure Interfaces for Mass Spectrometry Systems

Design of Portable Mass Spectrometers with Handheld Probes: Aspects of the Sampling and Miniature Pumping Systems

A new multi-beam apparatus for the study of surface chemistry routes to formation of complex organic molecules in space

Deducing the Composition of Venus Cloud Particles with the Autofluorescence Nephelometer (AFN)

Developing a Vacuum Electrospray Source to Implement Efficient Atmospheric Sampling for Miniature Ion Trap Mass Spectrometer

High-precision measurements of krypton and xenon isotopes with a new static-mode Quadrupole Ion Trap Mass Spectrometer

Aerial Platform Design Options for a Life-Finding Mission at Venus

Development of a custom on-line ultrasonic vapour analyzer/flowmeter for the ATLAS inner detector, with application to gaseous tracking and Cherenkov detectors

Study of discontinuous atmospheric pressure interfaces for mass spectrometry instrumentation development.

A combined ultrasonic flow meter and binary vapour mixture analyzer for the ATLAS silicon tracker

A Model of Radio Scintillations in the Deep Venus Atmosphere : Application to the DAVINCI Probe

Single-Beam Velocimetry with Dual Frequency Comb Absorption Spectroscopy

LIQUID NITROGEN (OXYGEN SIMULANT) TEST DATA ANALYSIS THERMODYNAMIC VENT SYSTEM

Frequency Channel Selection and Performance Simulation of a Microwave Radiometer for Temperature and Sulfuric Compound Profiling of the Venusian Lower Atmosphere

Continuous and simultaneous measurement of triple oxygen and hydrogen isotopes of liquid and vapour during evaporation

Multi-Channel Hyperspectral Imaging Spectrometer Design for Ultraviolet Detection in the Atmosphere of Venus

Synchronized Discharge Ionization for Analysis of Volatile Organic Compounds Using A Hand-Held Ion Trap Mass Spectrometer

Breaking the pumping speed barrier in mass spectrometry: discontinuous atmospheric pressure interface.