Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

An innovative tomographic technique integrated with acoustic-laser approach for detecting defects in tree trunk

Application of Ground-Penetrating Radar for Detecting Internal Anomalies in Tree Trunks with Irregular Contours

Nondestructive Evaluation of Special Defects Based on Ultrasound Metasurface

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

Reliability of acoustic tomography and ground-penetrating radar for tree decay detection

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

Detecting features of defect metal based on laser ultrasonic technique

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

A Study of Inner Crack Testing with the Laser Phased Array Method.

A Deep Learning-Augmented Stand-off Radar Scheme for Rapidly Detecting Tree Defects

Internal decay inspection of tree trunks using 3D point cloud and reverse time migration of ground penetrating radar data

Health Control of Tree Trunk Utilizing Microwave Imaging and Reverse Problem Algorithms

An innovative and automated method for characterizing wood defects on trunk surfaces using high-density 3D terrestrial LiDAR data

Defect Detection in Solid Timber Panels Using Air-Coupled Ultrasonic Imaging Techniques

Nondestructive testing of internal defects by ring-laser-excited ultrasonic

Machine learning based tomographic image reconstruction technique to detect hollows in wood

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Decay Detection through Automatic Recognition of Acoustic Velocity Pattern

Laser-generated Rayleigh Wave for Width Gauging of Subsurface Lateral Rectangular Defects

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing