Abstract:Compaction processes within mudstone samples across varying depths (723.5–3213.5 m) in the Vienna Basin were investigated, focusing on porosity changes and the resulting micromechanical response in the clay-rich, fine-grained fraction ("clay matrix"). A novel approach combining nanoindentation mapping with machine learning data analysis was developed to efficiently extract representative micromechanical parameters of the clay matrix. Emphasis was put on capturing the properties of the fine-grained, clay-dominated composite rather than individual mineral phases, enabling the analysis of compaction-induced strength changes at microscale. A significant enhancement in the mechanical strength of the clay matrix with increasing burial depth was observed. Reduced elastic modulus ( E r ) and hardness ( H ) increased from 6.8 ± 3.4 to 22.6 ± 7.5 GPa and from 0.2 ± 0.2 to 0.9 ± 0.2 GPa, respectively, over the depth interval of 2490 m. Moreover, a strong correlation between depth and porosity and consequently micromechanical properties of the clay matrix exists. This highlights the substantial influence of intra-clay porosity on mechanical properties, which follow a general compaction trend with depth. Broad ion beam-scanning electron microscopy (BIB-SEM) analysis was used for textural investigations at micro-to nanoscale and indicated that the reduction in porosity predominantly resulted from mechanical compaction rather than mineral diagenesis, which would have been noticeable by signs of significant dissolution or cementation. The correlation coefficient matrix between multiscale porosity measurements and nanoindentation affirmed that the porosity loss was closely linked to the enhanced mechanical properties of the fine-grained composite clay matrix, while other compositional variables like total clay mineral content showed weak correlations. Empirical mathematical equations were derived to describe the mechanical properties as generalized functions of depth and porosity. These may be used as geomechanical input for future basin analysis and geoenergy applications (e.g., seal rock studies in a geological storage context). This study introduces a new approach to unravel compaction processes in fine-grained rocks at microscale, emphasizing the interplay between intra-clay porosity and micromechanical changes during proceeding burial.

Quantifying Young's Modulus of Mudstone after Water Immersion: Insights from the Mechanical Properties of Micro-Mineral Compositions

Unraveling mudstone compaction at microscale: A combined approach of nanoindentation mapping and machine learning data analysis

Experimental and Numerical Simulation Study on the Influence of Gaseous Water on the Mechanical Properties of Red-Layer Mudstone in Central Sichuan

Characterization of Shale Softening by Large Volume-Based Nanoindentation

Nanoindentation-based characterization of micromechanical properties of greenish mudstone from deep Fushun West open-pit mine (Fushun city, China)

A Method for Estimating the Mechanical Parameters of the Laminae of Laminated Rocks Based On Uniaxial Compression and Tensile Tests

Swelling behaviors of heterogeneous red-bed mudstone subjected to different vertical stresses

Mapping the composite nature of clay matrix in mudstones: integrated micromechanics profiling by high-throughput nanoindentation and data analysis

Macro- and Microresearch on Swelling Characteristics and Deformation Mechanism of Red-Bed Mudstone in Central Sichuan, China

Water absorption/dehydration by NMR and mechanical response for weakly cemented mudstones subjected to different humidity conditions

Determination of shale macroscale modulus based on microscale measurement: A case study concerning multiscale mechanical characteristics

Microstructure and water-swelling mechanism of red-bed mudstone in the Xining region, Northeastern Tibetan Plateau

Experimental Study on Gaseous Moisture Absorption and Swelling of Red-Bed Mudstone in Central Sichuan, China under Different Relative Humidity Environments

Macroscopic mechanical properties of fluid-saturated sandstone at variable temperatures

Experimental Study on Mechanical Properties and Permeability Characteristics of Calcareous Mudstone under Different Confining Pressures

Using micro-indentation to determine the elastic modulus of shale laminae and its implication: Cross-scale correlation of elastic modulus of mineral and rock

Influences of Bedding Angle and Soaking Time on the Mechanical Behaviour of Silty Mudstone: Laboratory Testing and Theoretical Modelling

Experimental and model investigation on hydro-mechanical behaviour of sandy mudstone

Research of water influence on macro and homogenized fracture toughness, brittleness and relationship between different mechanical properties of Longmaxi shale outcrop

A quantitative description method for the mechanical behavior of soil-rock mixture as affected by water content

The Changing of Micromechanical Properties of Coal after Water Immersion: The Insight from Nanoindentation Test