Abstract:Improving the contamination resistance of membranes is one of the most effective ways to address the short service life of membranes. While preparing the membrane system structure, doping nanoparticles into the polymer matrix is beneficial to the preparation of high-performance membranes. To develop a new structure for membrane contamination protection, in this study, a novel asymmetric polyamide 66 composite ultrafiltration (UF) membrane was fabricated by incorporating different masses (ranging from zero to 0.5 wt.%) of graphene oxide (GO) into the polyamide 66 microporous substrate, using formic acid and propylene carbonate as solvents. The effects of GO doping on the morphology, microporous structure and surface of ultrafiltration membranes were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), integrated thermal analysis (DSC) and contact angle (CA). In addition, pure water flux, bovine serum albumin (BSA) rejection and contamination resistance were measured to evaluate the filtration performance of different membranes. The overall performance of all the modified membranes was improved compared to pure membranes. The results of contact angle and permeation experiments showed that the addition of GO improved the hydrophilicity of the membrane, but reduced the permeability of the membrane. The minimum flux was only 3.5 L/m2·h, but the rejection rate was 92.5%. Most noteworthy was the fact that GO further enhanced the anti-pollution performance of the membranes and achieved a remarkable performance of 91.32% when the GO content was 0.5 wt.%, which was 1.36 times higher than that of the pure membrane. Therefore, optimal performance was achieved. Furthermore, the UF membrane made of composite substrate offers a promising solution for the development of long-life ultrafiltration membranes with better stability, high-cost efficiency and adequate chemical durability.

Facemask comfort enhancement with graphene oxide from recovered carbon waste tyres

Graphene oxide embedded polyvinylidene fluoride nanofiber membranes with biomimetic polar adsorption function for mask cartridge materials

Graphene Oxide-Modified Polyacrylonitrile Nanofibrous Membranes for Efficient Air Filtration

Graphene Oxide/Fe3O4/Chitosan−Coated Nonwoven Polyester Fabric Extracted from Disposable Face Mask for Enhanced Efficiency of Organic Dye Adsorption

Effect of poly(2-(dimethylamino)ethyl methacrylate) brush-grafted graphene oxide on polyamide layer formation and nanofiltration performance

Role of Graphene Oxide in Support Layer Modification of Thin Film Composite (TFC) Membrane for Forward Osmosis Application

Comparison of Zinc Oxide Nanoparticle Integration into Non-Woven Fabrics Using Different Functionalisation Methods for Prospective Application as Active Facemasks

Graphene Oxide Modified Polyamide 66 Ultrafiltration Membranes with Enhanced Anti-Fouling Performance

Novel Application of Graphene Oxide to Improve Hydrophilicity and Mechanical Strength of Aramid Nanofiber Hybrid Membrane

Polystyrene/Fluorinated Polyurethane Electrospinning Nanofiber Membranes Incorporated with Graphene Oxide–Halamine as Mask Filter Materials for Reusable Antibacterial Applications

Evaluation of the degradation of the graphene-polypropylene composites of masks in harsh working conditions

Potential natural polymer‐based nanofibres for the development of facemasks in countering viral outbreaks

Enhancing Structural and Thermal Properties of Poly(lactic Acid) Using Graphene Oxide Filler and Anionic Surfactant Treatment

The synergistic effect of graphene oxide and flame-retardant fabrics

A high flux graphene oxide nanoparticles embedded in PAN nanofiber microfiltration membrane for water treatment applications with improved anti-fouling performance

Multi-approach synthesis of functionalized graphene oxide as reinforcement for polyethylene: Make a strong interaction

Improvement of thermal stability, flame retardancy, hydrophobicity, tear and wear performance of polyester fabrics with graphene nanoplatelet coating

Enhanced mechanical properties of polyphenylene sulfide and liquid crystal polymer composites by interfacial bonding capacity of graft‐modified graphene oxide and glass fibers

Saving 80% Polypropylene in Facemasks by Laser-Assisted Melt-Blown Nanofibers.

A Facile Approach of Fabricating Electrically Conductive Knitted Fabrics Using Graphene Oxide and Textile-Based Waste Material

Fast and facile graphene oxide grafting on hydrophobic polyamide fabric via electrophoretic deposition route