Theoretical design and characterization of new terpolymer donors based on PTB7Ir for high-efficiency triplet-material-based organic photovoltaics

Shuangbao Li,Yang Chen,Zhen Li,Jianpo Zhang,Jie Chen,Yun Geng,Zhongmin Su

DOI: https://doi.org/10.1039/d2ra00033d

IF: 4.036

2022-01-01

RSC Advances

Abstract:Compared with PTB7Ir, the designed terpolymer 10 will be a promising donor candidate for high-performance T-OPVs.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Theoretical studies of new iridium-based terpolymer donors for high-efficiency triplet-material-based organic photovoltaics: Incorporation of different iridium(III) complexes

Shuangbao Li,Yang Chen,Zian Wang,Jie Chen,Jianpo Zhang,Jianhang Nie,Yingchen Duan,Yun Geng,Zhongmin Su

DOI: https://doi.org/10.1016/j.matchemphys.2023.127780

IF: 4.778

2023-04-19

Materials Chemistry and Physics

Abstract:Screening potential terpolymer donors for high-performance triplet-material-based organic photovoltaics (T-OPVs) has been a challenge. Herein, four terpolymer donors, with different bis-tridentate iridium(III) complexes incorporated into the backbone of PTB7Ir, were designed and investigated by DFT and TD-DFT methods. The results show that, for designed 1 – 4 molecules, the bis-tridentate architecture in iridium complexes contributes to the formation of the orbital transitions involving iridium atoms, and promotes the enhancement of spin-orbit coupling (SOC) in heavy metals. Based on the efficient exciton transformation channel from the lowest singlet (S 1 ) state to the third triplet (T 3 ) state, the designed 1 – 3 have smaller energy differences (Δ E S1−T3 ) and larger SOC matrix elements (⟨S 1 | H SOC |T 3 ⟩) between S 1 and T 3 , resulting in the faster intersystem crossing (ISC) and triplet exciton formation. Furthermore, 1 – 3 /PC 71 BM heterojunctions with –Δ G CRT <−0.1 eV (–Δ G CRT refers to the driving force of triplet charge recombination) could exhibit suppressed triplet charge recombination (CRT) processes. The calculation results suggest that designed 1 – 3 systems can present enhanced inter-facial charge transfer and photovoltaic performance, and become promising candidates for iridium-based terpolymer donors in T-OPVs. This work will provide valuable guidance for the molecular design of T-OPV terpolymer donors.

materials science, multidisciplinary
A Theoretical Exploration of Charge Transfer Dynamics in PTB7Ir/PC71BM Triplet-Material-based Organic Photovoltaics

Shuang-Bao Li,Yun Geng,Zhong-Min Su

DOI: https://doi.org/10.1016/j.orgel.2020.105956

IF: 3.868

2020-01-01

Organic Electronics

Abstract:In the field of organic photovoltaics (OPVs), triplet materials are expected to be good candidates for improving power conversion efficiency (PCE) due to their long-lifetime and energy-tunable triplet excitons. A comparative photophysical analysis (including absorption spectra, exciton diffusion lengths, singlet and triplet charge transfer dynamics and so on) of PTB7/PC71BM and PTB7Ir/PC71BM cell devices was investigated, by DFT and TD-DFT methods, to explore why PTB7Ir/PC71BM device has obvious higher PCE (8.71%) than PTB7/PC71BM device (6.64%) in the same condition. The results manifest that the enhanced PCE of the PTB7Ir/PC71BM device is mainly attributed to the improving exciton diffusion lengths owing to the longer lifetime and increasing diffusivity of triplet excitons. Besides, to reveal the structure-property relationships of the polymer donor materials, we calculated the values of driving force for charge recombination to the triplet (CRT) with the changes of torsional angles between electron donating and electron withdrawing units of PTB7 and PTB7Ir. It is found that suitably increasing the angle and number of torsional angles of polymer donors to limit conjugation extent will prevent the CRT process at donor/acceptor interface and thus improve photovoltaic performance. This work would provide theoretical guidelines for the molecular design of high-efficiency triplet-material-based OPVs.
Molecular Design and Application of a Photovoltaic Polymer with Improved Optical Properties and Molecular Energy Levels

Huifeng Yao,Hao Zhang,Long Ye,Wenchao Zhao,Shaoqing Zhang,Jianhui Hou

DOI: https://doi.org/10.1021/acs.macromol.5b00649

IF: 5.5

2015-01-01

Macromolecules

Abstract:(E)-5-(2-(5-(Alkylthio)thiophen-2-yl)vinyl)thiophene-2-yl functional groups were introduced onto 4- and 8-positions of BDT units, and this building block was used to construct a new derivative polymer of PTB7, named as PBT-TVT. Benefiting from the prolonged conjugation of the conjugated side groups on BDT units, the optical absorption property of PBT-TVT can be improved greatly compared to that of PTB7, so an inspiring result of 7.67% was obtained by using PBT-TVT as the donor and PC61BM as the acceptor in polymer solar cells (PSCs), which is much higher than that of the PTB7:PC61BM-based device and also one of the highest results for PSCs with PC61BM. In electrochemical cyclic voltammetry (CV) measurements, PBT-TVT showed a deeper HOMO level than PTB7 so the device based on the former exhibits higher open circuit voltage than the latter. Moreover, in comparison with PTB7, the new polymer PBT-TVT exhibited stronger interchain pi-pi interaction and thus higher hole mobility. Overall, the results in this work indicated that PBT-TVT is a promising donor polymer, and the strategy used in this work will be beneficial for molecular design of polymer photovoltaic materials for large-scale production of PSCs.
A designed bithiopheneimide-based conjugated polymer for organic photovoltaic with ultrafast charge transfer at donor/PC(71)BM interface: theoretical study and characterization.

Shuang-Bao Li,Yu-Ai Duan,Yun Geng,Hai-Bin Li,Jian-Zhao Zhang,Hong-Liang Xu,Min Zhang,Zhong-Min Su

DOI: https://doi.org/10.1039/c4cp03022b

IF: 3.3

2014-01-01

Physical Chemistry Chemical Physics

Abstract:In the current work, a series of bithiopheneimide (BTI)-based D-A copolymers were investigated based on the reported PDTSBTI (1) to screen excellent molecules toward organic photovoltaic (OPV) donor materials. It is found that the PCE based on the proposed derivative 4, where the silicon atom is replaced with vinyl and cyano groups on the DTS unit, shows a 70 percent improvement by Scharber diagrams compared with its prototype 1. Then, the charge transfer dynamics of 1/PC71BM and 4/PC71BM were investigated, including the intermolecular charge transfer (inter-CT) and recombination (inter-CR) rates. The theoretical data demonstrate that the ratio k(inter-CT)/k(inter-CR) of 4/PC71BM heterojunction is about 1 x 10(5) times higher than that of 1/PC71BM. These results clearly reveal that the designed donor molecule 4 will be a promising candidate for high-performance OPV device. We expect that this work from electron processing at the D/A interface may provide a theoretical guideline for further optimization and design of organic copolymer donor materials.
16.5% Efficiency Ternary Organic Photovoltaics with Two Polymer Donors by Optimizing Molecular Arrangement and Phase Separation

Guanshui Xie,Zheling Zhang,Zhenying Su,Xiaoling Zhang,Jian Zhang

DOI: https://doi.org/10.1016/j.nanoen.2020.104447

IF: 17.6

2020-01-01

Nano Energy

Abstract:Ternary organic photovoltaics (OPVs) combining two polymer donors (PM6, J71) and one non-fullerene acceptor Y6 were prepared in conventional configuration. The complementary absorption spectra of PM6 and J71 can maximize photon harvesting in ternary films that is beneficial to the enhancement of short circuit current density (J(SC)). The open circuit voltage (V-OC) of ternary OPVs show a monotonously increased trend along with the increase of J71 content, which is attributed to reduced energy loss considering the similar HOMO energy levels of two donors. Furthermore, the optimized molecular arrangement and phase separation in ternary films result a high fill factor (FF) of 76.0%. As a result, by incorporating 10 wt% J71 in ternary films, the power conversion efficiency of ternary OPVs achieves 16.5% that is the highest values for ternary OPVs with two donors. The results indicate that ternary OPVs with two donors could achieve high performance by well-optimized photon harvesting and phase separation.
Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High‐Performance Organic Solar Cells

Fuliang Cheng,Yongjie Cui,Feng Ding,Zeng Chen,Qian Xie,Xinxin Xia,Peipei Zhu,Xinhui Lu,Haiming Zhu,Xunfan Liao,Yiwang Chen

DOI: https://doi.org/10.1002/adma.202300820

IF: 29.4

2023-04-20

Advanced Materials

Abstract:For the first time, we combined terpolymerization and regioisomerization strategies to develop novel polymer donors to overcome the difficulty of improving organic solar cells (OSCs) performance. Two novel isomeric units, TTO and TTI, were obtained and incorporated into the PM6 backbone via random copolymerization to form a series of terpolymers. Interestingly, we found that different chlorine (Cl) substituent positions can significantly change the molecular planarity and electrostatic potential (ESP) owing to the steric hindrance effect of the heavy Cl atom, which leads to different molecular aggregation behaviors and miscibility between the donor and acceptor. The TTO unit features a higher number of multiple S⋅⋅⋅O non‐covalent interactions, more positive ESP, and fewer isomer structures than TTI. As a result, the terpolymer PM6‐TTO‐10 exhibited a much better molecular coplanarity, stronger crystallinity, more obvious aggregation behavior, and proper phase separation in the blend film, which are conducive to more efficient exciton dissociation and charge transfer. Consequently, the PM6‐TTO‐10:BTP‐eC9‐based OSCs achieved a champion power conversion efficiency (PCE) of 18.37% with an outstanding fill factor of 79.97%, which are among the highest values reported for terpolymer‐based OSCs. This work demonstrates that terpolymerization combined with Cl regioisomerization is an efficient approach for achieving high‐performance polymer donors. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Non‐covalent Intramolecular Interactions Induced High‐Performance Terpolymer Donors

Jiayong Lu,Junran Wu,Bin Huang,Yu Fang,Xiangmeng Deng,Jialin Zhang,Shanshan Chen,Seonghun Jeong,Jinbiao Liu,Changduk Yang

DOI: https://doi.org/10.1002/adfm.202312545

IF: 19

2023-12-16

Advanced Functional Materials

Abstract:Two terpolymer donors L1 and L2 are developed by combined esterylthiophene‐based DDT unit as the third component to polymer matrix PM6. Thanks to the S···O non‐covalent intramolecular interactions of DDT unit, the L1:L8‐BO‐based device exhibit well‐defined nanofibrous morphology and preference face‐on orientation, yielding a record power conversion efficiency of up to 18.75%. Ternary polymerization are demonstrated as a feasible and successful method of optimizing absorption, energy level, and crystallinity by maintaining the excellent properties of a polymer matrix. However, the third unit inevitably interrupts the periodic sequence distribution of the ordering packing of conjugated backbones, and thus balancing the trade‐off between the advantages of the third component and the disruption caused by the nonperiodic sequence distribution remains a great challenge. Herein, two terpolymer donors L1 and L2 are developed by introducing diethyl‐5,5′"‐dibromo‐4,4′"‐bis(2‐ethylhexyl)‐[2,2′:5′,2′'‐terthiophene]‐3′,4′‐dicarboxylate (DDT) unit as the third component. Owing to the electron‐deficient ability and S···O non‐covalent intramolecular interactions of DDT, terpolymers L1 and L2 displays deeper energy levels, enhanced molecular rigidity, and planarity than PM6. After blending with L8‐BO, the L1‐based polymer solar cells exhibit well miscibility with L8‐BO, leading to a more well‐defined nanofibrous morphology, face‐on orientation, and a slight energy loss in the blend films. As a result, the optimized L1:L8‐BO‐based device achieves a record power conversion efficiency (PCE) as high as 18.75%. This work provides a feasible strategy to develop high‐performance polymer donors via utilizing S···O non‐covalent intramolecular interactions to improve the planarity of polymer donors.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Tetracyclic-Bislactone-based Copolymer Donor for Efficient Semitransparent Organic Photovoltaics

Mingjie Li,Tai An,Zongliang Ou,Ke Jin,Zhiwen Jin,Keyou Yan,He Tian,Wentao Wang,Shangfeng Yang,Guan-Wu Wang,Qiuling Song,Zuo Xiao,Liming Ding

DOI: https://doi.org/10.1039/d3ma00179b

2023-01-01

Materials Advances

Abstract:A copolymer donor PBDTTPTP based on a tetracyclic bislactone unit, thieno[2 & PRIME;,3 & PRIME;:5,6]pyrano[3,4-d]thieno[3,2-b]pyran-4,9-dione (TPTP), was developed. The single crystal structure of a TPTP derivative indicates the & pi;-extended planar geometry of TPTP and its good coplanarity with the adjacent thiophene units. Thanks to the strong electron-withdrawing properties and good coplanarity of TPTP, the copolymer PBDTTPTP shows a deep HOMO level of -5.60 eV, a small optical bandgap of 1.65 eV and a good hole mobility of 6.57 x 10(-4) cm(2) V-1 s(-1). These features make PBDTTPTP an efficient donor material for semitransparent organic photovoltaics (STOPVs). STOPVs based on PBDTTPTP and N3 gave a high light utilization efficiency of 4.38%, with a power conversion efficiency of 12.26% and an average visible light transmittance of 35.7%.
Terpolymer Containing a meta-Octyloxy-phenyl-Modified Dithieno[3,2- f:2',3'- h]quinoxaline Unit Enabling Efficient Organic Solar Cells

Yuchen Zhou,Shujuan Liu,Zezhou Liang,Haimei Wu,Liuchang Wang,Weiping Wang,Baofeng Zhao,Zhiyuan Cong,Guanghao Lu,Chao Gao

DOI: https://doi.org/10.1021/acsami.3c18789

2024-03-20

Abstract:With the rapid development of small-molecule electron acceptors, polymer electron donors are becoming more important than ever in organic photovoltaics, and there is still room for the currently available high-performance polymer donors. To further develop polymer donors with finely tunable structures to achieve better photovoltaic performances, random ternary copolymerization is a useful technique. Herein, by incorporating a new electron-withdrawing segment 2,3-bis(3-octyloxyphenyl)dithieno[3,2-f:2',3'-h]quinoxaline derivative (C12T-TQ) to PM6, a series of terpolymers were synthesized. It is worth noting that the introduction of the C12T-TQ unit can deepen the highest occupied molecular orbital energy levels of the resultant polymers. In addition, the polymer Z6 with a 10% C12T-TQ ratio possesses the highest film absorption coefficient (9.86 × 104 cm-1) among the four polymers. When blended with Y6, it exhibited superior miscibility and mutual crystallinity enhancement between Z6 and Y6, suppressed recombination, better exciton separation and charge collection characteristics, and faster hole transfer in the D-A interface. Consequently, the device of Z6:Y6 successfully achieved enhanced photovoltaic parameters and yielded an efficiency of 17.01%, higher than the 16.18% of the PM6:Y6 device, demonstrating the effectiveness of the meta-octyloxy-phenyl-modified dithieno[3,2-f:2',3'-h]quinoxaline moiety to build promising terpolymer donors for high-performance organic solar cells.
Enhanced Power Conversion Efficiency in Iridium Complex-Based Terpolymers for Polymer Solar Cells

Zhongyuan Xue,Shifan Wang,Jie Yang,Yu Zhong,Min Qian,Cheng Li,Zhiguo Zhang,Guichuan Xing,Sven Huettner,Youtian Tao,Yongfang Li,Wei Huang

DOI: https://doi.org/10.1038/s41528-017-0014-9

IF: 14.6

2018-01-01

npj Flexible Electronics

Abstract:By introducing various low concentrations of Iridium complexes to the famous donor polymer of PTB7-Th backbone, new heavy metal containing terpolymers have been demonstrated. When blended with PC 71 BM, an obvious increase of power conversion efficiency (PCE) is obtained in 1 mol% Ir containing polymer for different photovoltaic devices either using Ca or PDIN as cathode interface layers. The impact of molecular weight on the photovoltaic performance has been particularly considered by using three batches of control polymer PTB7-Th to ensure a fair and more convincing comparison. At similar molecular weight conditions ( M n : ~60 kg mol −1 , M w : 100–110 kg mol −1 ), the 1 mol% Ir containing PTB7-ThIr1/PC 71 BM blends exhibits enhanced PCE to 9.19% compared with 7.92% of the control PTB7-Th. Through a combination of physical measurement, such as optoelectrical characterization, GIWAXS and pico-second time-resolved photoluminescence, the enhancement are contributed from comprehensive factors of higher hole mobility, less bimolecular recombination and more efficient slow process of charge separation.
A theorectical design of performant chlorinated benzothiadiazole-based polymers as donor for organic photovoltaic devices

Zhi-Wen Zhao,Qing-Qing Pan,Yun Geng,Shui-Xing Wu,Min Zhang,Liang Zhao,Zhong-Min Su

DOI: https://doi.org/10.1016/j.orgel.2018.06.047

IF: 3.868

2018-01-01

Organic Electronics

Abstract:Chlorination is often adopted in the synthesis of donor materials considering the obvious improvement on efficiency of organic photovoltaic (OPV) device. Thus the chlorination effect was firstly probed based on density functional theory (DFT) calculation, which shows that the chlorinated benzothiadiazole connected with two thiophene rings (BTClTT) fragment although has larger optical bandgap and relatively blue-shifted spectrum, its deeper frontier molecular orbital (FMO) energy level, larger charge transfer distance (DCT) and much more transferred charges (CT), obvious negative natural population analysis (NPA) charges, larger twisted dihedral angles and smaller value of BLA indicate its favorable properties for the application in OPVs. Then, we designed a series of donor materials 2–7 adopting two strategies based on the experimental polymer 1 which contains BTClTT fragment. The calculated physical parameters characterizing OPV performance such as open-circuit voltage (VOC) and absorption-properties manifest that the design through side chains modifications for 2–5 may have slight influence on their cell performance while the backbone replacements for 6 and 7 exhibit prominent enhancement whether on VOC and photon-absorption property or on the charge separation ability. Therefore, our calculations suggest feasible strategies of designing donor materials for the chlorinated BT-based donor materials in OPVs. We hope our work can provide some guidelines for the future study on chlorinated donor materials.
Achieving 31% efficiency in organic photovoltaic cells under indoor light using a low energetic disorder polymer donor

Pengqing Bi,Cunbin An,Tao Zhang,Zhihao Chen,Ye Xu,Yong Cui,Jianqiu Wang,Jiayao Li,Yafei Wang,Junzhen Ren,Xiaotao Hao,Shaoqing Zhang,Jianhui Hou

DOI: https://doi.org/10.1039/d2ta07506g

IF: 11.9

2023-01-04

Journal of Materials Chemistry A

Abstract:Polymer donors with wide bandgaps and low energetic disorders are critical for fabricating high-performance indoor organic photovoltaic cells (IOPVs). Herein, a series of polymers ( PB3 , PB4 and PB5 ) based on thiadiazole (TDZ), 4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2- b :4,5- b ′]dithiophene (BDT-T) and fluorinated BDT-T (BDT-T-2F) units are designed and synthesized based on a random polymerization strategy. The terpolymers demonstrate wide optical bandgaps larger than 2.0 eV. Compared to the host polymer PB2 , the terpolymers exhibit downshifted energy levels and enhanced crystallinities, which show much lower energetic disorders. After blending with a wide bandgap non-fullerene acceptor FTCC-Br, the optimized terpolymer shows a much faster charge transfer rate than PB2 . Importantly, the OPV cell based on PB3:FTCC-Br achieves a high power conversion efficiency of over 15% with an open-circuit voltage ( V OC ) of 1.06 V under one sun illumination. The PB4:FTCC-Br-based cell demonstrates a PCE of 14.79% with a high V OC of 1.09 V. It also should be noted that the PB3:BTP-eC9-based cell exhibits a PCE of 18.28%. Besides, the PB4:FTCC-Br-based cell with an effective area of 1.0 cm 2 exhibits a PCE of over 31% under 2700 K illumination of 1000 lux. The results indicate that the ternary copolymerization strategy is an effective way to fine-tune the opto-electronic properties of highly efficient polymer donors for versatile photovoltaic applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Ruijie Ma,Cenqi Yan,Jiangsheng Yu,Tao Liu,Heng Liu,Yuhao Li,Jian Chen,Zhenghui Luo,Bo Tang,Xinhui Lu,Gang Li,He Yan

DOI: https://doi.org/10.1021/acsenergylett.2c01364

IF: 22

2022-07-13

ACS Energy Letters

Abstract:Here, we combine two donor polymers with a relatively short synthesis method and fabricate ternary organic solar cells (OSCs) with a high efficiency and a decent figure-of-merit. A series of characterizations show that the optimal morphology of the ternary blend is the result of the coupling and competition of PTQ10 and PTVT‑T, where the molecular packing and phase separation motif of PTQ10 is broken but the strong aggregation of PTVT‑T is suppressed, resulting in efficient charge transport and collection, as well as suppressed bimolecular recombination. Moreover, a previously reported solvent-vapor-assisted casting method, taken as an understanding-guided optimization, pushes the optimal system’s efficiency to 19.11%. Furthermore, PTVT‑T-containing systems clearly show better light soaking and thermal stability than the PTQ10 binary control system, benefiting from the durable polymer matrix. Our work provides a useful approach for developing efficient, stable, and low-cost OSCs based on state-of-the-art donor/acceptor systems through morphology control of the ternary design.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology,energy & fuels,electrochemistry
Exploring More Effective Polymer Donors for the Famous Non-Fullerene Acceptor ITIC in Organic Solar Cells by Increasing Electron-Withdrawing Ability

Qing-Qing Pan,Shuang-Bao Li,Yong Wu,Yun Geng,Min Zhang,Zhong-Min Su

DOI: https://doi.org/10.1016/j.orgel.2017.11.002

IF: 3.868

2018-01-01

Organic Electronics

Abstract:Recently, the non-fullerene acceptor ITIC has attracted a lot of attention in terms of its prominent performance in organic solar cell (OSC). A better match with the donor materials is critical for it, so we on one hand compared the match of two typical donors PBDB-T and PBQ-0F with ITIC trying to find the main difference between them. On the other hand, we designed two donors 1 and 2 based on the same 2D-BDT unit and estimated their cell efficiency aiming to explore more effective donors for ITIC. The molecular dynamics simulation was carried out to get more practical photovoltaic interface, and the density functional theory was employed to estimate the cell efficiency. It is found that PBDB-T not only exhibits higher charge separation efficiency depending on larger charge separation and smaller charge recombination rates than PBQ-0F, but also displays stronger electron-hole coherence from donor to acceptor fragments at its S-1 state than PBQ-0F indicating its easier exciton dissociation at excited states. The stronger electron-withdrawing ability of the acceptor fragment in PBDB-T is concluded to make the main contribution to its higher charge separation efficiency, which is further proved by our designed donors 1 and 2. Molecule 2 with stronger electron-withdrawing ability of the acceptor fragment than PBDB-T shows better charge separation performance at the interface than PBDB-T, which again suggests introducing strong electron-withdrawing group in this kind of donors may be a good choice for improving the performance of organic solar cell using ITIC as acceptor.
Over 17.6% Efficiency Organic Photovoltaic Devices with Two Compatible Polymer Donors

Chunyu Xu,Xiaoling Ma,Zijin Zhao,Mengyun Jiang,Zhenghao Hu,Jinhua Gao,Zhengqi Deng,Zhengji Zhou,Qiaoshi An,Jian Zhang,Fujun Zhang

DOI: https://doi.org/10.1002/solr.202100175

IF: 9.1726

2021-05-30

Solar RRL

Abstract:<section class="article-section__content">Efficient ternary blend organic photovoltaic devices (OPVs) are built based on a D18-Cl:Y6 host system and star polymer donor PM6 as the third component. A power conversion efficiency (PCE) of 16.89% is achieved in D18-Cl:Y6 host binary OPVs, with a short-circuit current density (JSC) of 25.31 mA cm−2, an open-circuit voltage (VOC) of 0.878 V, and a fill factor (FF) of 75.81%. Upon incorporating appropriate PM6 in active layers, the PCE of optimal ternary blend OPVs can be increased to 17.61%, benefiting from a JSC of 26.35 mA cm−2, a VOC of 0.871 V, and an FF of 76.82%. Polymers D18-Cl and PM6 have good compatibility and similar highest occupied molecular orbital (HOMO) levels, which enable to form D18-Cl:PM6 alloyed states for efficient hole transport in ternary blend active layers. Meanwhile, trap density in ternary blend active layers is decreased by incorporating PM6, which is conducive to weaken charge recombination in ternary blend active layers. The gradually varied VOC values of ternary blend OPVs can be well explained from the varied HOMO levels of D18-Cl:PM6 alloyed states. The results indicate that two compatible polymer donors with similar HOMO levels have great potential in achieving efficient ternary blend OPVs. </section>

energy & fuels,materials science, multidisciplinary
Metallated terpolymer donors with strongly absorbing iridium complex enables polymer solar cells with 16.71% efficiency

Miao Zhang,Xiaoling Ma,Hongyang Zhang,Longzhi Zhu,Linli Xu,Fujun Zhang,Chui-Shan Tsang,Lawrence Yoon Suk Lee,Han Young Woo,Zhicai He,Wai-Yeung Wong

DOI: https://doi.org/10.1016/j.cej.2021.132832

IF: 15.1

2022-01-01

Chemical Engineering Journal

Abstract:With the sharp growth of non-fullerene acceptors, it is still challenging to develop new polymer donors for highly efficient polymer solar cells (PSCs). Here, a series of metallated terpolymer donors PM6Irx (x = 1%, 3%, 5%) are synthesized by incorporating a new iridium complex, named M1, into the backbone of the state-of-the-art polymer PM6. The M1 shows a strong absorption in the visible region, which is beneficial to enhance photon harvesting in the active layer. The PM6Ir1:Y6 based PSCs exhibit the best power conversion efficiency (PCE) of 16.71% with short-circuit current density (JSC) of 26.16 mA cm-2, open-circuit voltage (VOC) of 0.848 V and fill factor (FF) of 75.33%. A PCE improvement of about 7% is achieved compared with PM6Ir0:Y6 based control device with PCE of 15.65%, which is due to the markedly increased JSC and FF. The introduction of a moderate amount of M1 enhances the photon harvesting, triplet excitons and lifetime, charge mobility as well as optimizes the active layer morphology. This work indicates that iridium complexes with strong absorption in the visible region have a great potential to promote the photovoltaic performance.
Insights into Excitonic Dynamics of Terpolymer-Based High-Efficiency Nonfullerene Polymer Solar Cells: Enhancing the Yield of Charge Separation States.

Jianfeng Li,Zezhou Liang,Xiaoming Li,Hongdong Li,Yufei Wang,Jicheng Qin,Junfeng Tong,Lihe Yan,Xichang Bao,Yangjun Xia

DOI: https://doi.org/10.1021/acsami.9b20364

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Ternary copolymerization strategy is considered an effective method to achieve high-performance photovoltaic conjugated polymers. Herein, a donor-acceptor1-donor-acceptor2-type random copolymer, named PBDTNS-TZ-BDD (T1), containing one electron-rich unit alkylthionaphthyl-flanked benzo[1,2-b/4,5-b'] di-thiophene (BDTNS) as D and two electron-deficient moieties benzo[1,2-c/4,5-c']dithiophene-4,8-dione (BDD) and fluorinated benzotriazole as A, was synthesized to investigate the excitonic dynamic effect. Also, the D-A-type alternating copolymer PBDTNS-BDD (P1) was also prepared for a clear comparison. Although the UV-Vis spectra and energy levels of P1 and T1 are similar, the power conversion efficiencies (PCEs) of the related devices are 11.50% (T1/ITIC) and 8.89% (P1/ITIC), respectively. The reason for this is systematically investigated and analyzed by theoretical calculation, photoluminescence, and pump-probe transient absorption spectroscopy. The density functional theory (DFT) and time-dependent density functional theory (TD-DFT) calculation results show that the terpolymer T1 with a lower exciton binding energy and a longer lifetime of spontaneous luminescence can synergistically increase the number of excitons reaching the donor/acceptor interface. The results of the pump-probe transient absorption spectroscopy show that the yield of charge separation of T1/ITIC is higher than that of the P1/ITIC blend film, and improved PCE could be achieved via copolymerization strategies. Moreover, the fabrication of the T1-based device is also simple without any additive or postprocessing. Therefore, it provides a promising and innovative method to design high-performance terpolymer materials.
Wide-bandgap polymer donors for non-fullerene organic solar cells

Jiamin Cao,Lifei Yi,Lixiu Zhang,Yingping Zou,Liming Ding

DOI: https://doi.org/10.1039/d2ta07463j

IF: 11.9

2022-01-01

Journal of Materials Chemistry A

Abstract:High-performance wide-bandgap (WBG) polymer donors are one of the key factors in determining the power conversion efficiencies (PCEs) of non-fullerene organic solar cells (OSCs). To date, thousands of polymer donors with different building blocks have been synthesized, but the reported efficient polymers need to be classified and analyzed to achieve better photovoltaic performances. Accordingly, in this work, we present a brief survey of the developments of WBG polymers and classify these efficient polymers into five categories. Moreover, the correlation among their chemical structures and optical properties, electronic properties, aggregation behavior, and photovoltaic performance are summarized and discussed. (i) PBDB-T and the fluorinated derivative PM6 are the most widely used polymer donors for evaluating photovoltaic properties and conducting theoretical research in OSCs. (ii) The D18 series polymers, which were first reported by Ding's group, are among the best polymer materials with over 19% PCEs in ternary OSCs. (iii) Polythiophenes (PTs) are the cheapest donors for commercial OSCs but exhibit intrinsically inferior photovoltaic performance compared with other D-A copolymers. However, the introduction of electron-withdrawing groups has enhanced the performance of PTs, achieving PCEs of over 17%. (iv) Quinoxaline (Qx)-based polymers exhibit excellent photovoltaic performance. Especially, PTQ10 shows great potential for commercial production due to its low cost and high performance. (v) There are also many other polymers with decent photovoltaic performances, such as lactone and 1,3,4-thiadiazole-based polymers. These results indicate the diversity of conjugated polymers and can inspire chemists to develop more effective polymer materials for commercialization. Finally, some perspectives for the further development of WBG polymers are provided and the bright future of OSCs is emphasized.
Efficient Ternary Polymer Solar Cells with Two Well‐Compatible Donors and One Ultranarrow Bandgap Nonfullerene Acceptor

Xiaoling Ma,Yang Mi,Fujun Zhang,Qiaoshi An,Miao Zhang,Zhenghao Hu,Xinfeng Liu,Jian Zhang,Weihua Tang

DOI: https://doi.org/10.1002/aenm.201702854

IF: 27.8

2018-01-01

Advanced Energy Materials

Abstract:Nonfullerene polymer solar cells (PSCs) are fabricated by using one wide bandgap donor PBDB-T and one ultranarrow bandgap acceptor IEICO-4F as the active layers. One medium bandgap donor PTB7-Th is selected as the third component due to the similar highest occupied molecular orbital level compared to that of PBDB-T and their complementary absorption spectra. The champion power conversion efficiency (PCE) of PSCs is increased from 10.25% to 11.62% via incorporating 20 wt% PTB7-Th in donors, with enhanced short-circuit current (J(SC)) of 24.14 mA cm(-2) and fill factor (FF) of 65.03%. The 11.62% PCE should be the highest value for ternary nonfullerene PSCs. The main contribution of PTB7-Th can be summarized as the improved photon harvesting and enhanced exciton utilization of PBDB-T due to the efficient energy transfer from PBDB-T to PTB7-Th. Meanwhile, PTB7-Th can also act as a regulator to adjust PBDB-T molecular arrangement for optimizing charge transport, resulting in the enhanced FF of ternary PSCs. This experimental result may provide new insight for developing high-performance ternary nonfullerene PSCs by selecting two well-compatible donors with different bandgap and one ultranarrow bandgap acceptor.
Molecular Design of Fully Nonfused Acceptors for Efficient Organic Photovoltaic Cells

Ni Yang,Yong Cui,Tao Zhang,Cunbin An,Zhihao Chen,Yang Xiao,Yue Yu,Yafei Wang,Xiao-Tao Hao,Jianhui Hou

DOI: https://doi.org/10.1021/jacs.4c00090

2024-04-03

Abstract:The nonfused thiophene-benzene-thiophene (TBT) unit offers advantages in obtaining low-cost organic photovoltaic (OPV) materials due to its simple structure. However, OPV cells, including TBT-based acceptors, exhibit significantly lower energy conversion efficiencies. Here, we introduce a novel approach involving the design and synthesis of three TBT-based acceptors by substituting different position-branched side chains on the TBT unit. In comparison to TBT-10 and TBT-11, TBT-13, which exclusively incorporates α-position branched side chains with a large steric hindrance, demonstrates a more planar and stable conformation. When blended with the donor PBQx-TF, TBT-13-based blend film achieves favorable π-π stacking and aggregation characteristics, resulting in excellent charge transfer performance in the corresponding device. Due to the simultaneous enhancements in short-circuit current density and fill factor, the TBT-13-based OPV cell obtains an outstanding efficiency of 16.1%, marking the highest value for the cells based on fully nonfused acceptors. Our work provides a practical molecular design strategy for high-performance and low-cost OPV materials.

Theoretical design and characterization of new terpolymer donors based on PTB7Ir for high-efficiency triplet-material-based organic photovoltaics

Theoretical studies of new iridium-based terpolymer donors for high-efficiency triplet-material-based organic photovoltaics: Incorporation of different iridium(III) complexes

A Theoretical Exploration of Charge Transfer Dynamics in PTB7Ir/PC71BM Triplet-Material-based Organic Photovoltaics

Molecular Design and Application of a Photovoltaic Polymer with Improved Optical Properties and Molecular Energy Levels

A designed bithiopheneimide-based conjugated polymer for organic photovoltaic with ultrafast charge transfer at donor/PC(71)BM interface: theoretical study and characterization.

16.5% Efficiency Ternary Organic Photovoltaics with Two Polymer Donors by Optimizing Molecular Arrangement and Phase Separation

Terpolymerization and Regioisomerization Strategy to Construct Efficient Terpolymer Donors Enabling High‐Performance Organic Solar Cells

Non‐covalent Intramolecular Interactions Induced High‐Performance Terpolymer Donors

A Tetracyclic-Bislactone-based Copolymer Donor for Efficient Semitransparent Organic Photovoltaics

Terpolymer Containing a meta-Octyloxy-phenyl-Modified Dithieno[3,2- f:2',3'- h]quinoxaline Unit Enabling Efficient Organic Solar Cells

Enhanced Power Conversion Efficiency in Iridium Complex-Based Terpolymers for Polymer Solar Cells

A theorectical design of performant chlorinated benzothiadiazole-based polymers as donor for organic photovoltaic devices

Achieving 31% efficiency in organic photovoltaic cells under indoor light using a low energetic disorder polymer donor

High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Exploring More Effective Polymer Donors for the Famous Non-Fullerene Acceptor ITIC in Organic Solar Cells by Increasing Electron-Withdrawing Ability

Over 17.6% Efficiency Organic Photovoltaic Devices with Two Compatible Polymer Donors

Metallated terpolymer donors with strongly absorbing iridium complex enables polymer solar cells with 16.71% efficiency

Insights into Excitonic Dynamics of Terpolymer-Based High-Efficiency Nonfullerene Polymer Solar Cells: Enhancing the Yield of Charge Separation States.

Wide-bandgap polymer donors for non-fullerene organic solar cells

Efficient Ternary Polymer Solar Cells with Two Well‐Compatible Donors and One Ultranarrow Bandgap Nonfullerene Acceptor

Molecular Design of Fully Nonfused Acceptors for Efficient Organic Photovoltaic Cells