Abstract:Excess molar enthalpies, $H_{\text{m}}^{\text{E}}$, at 298.15 K and 0.1 MPa have been measured by means of a Tian-Calvet microcalorimeter for the systems benzylamine (phenylmethanamine) + heptane, or + methanol, or + 1-propanol, or + 1-pentanol, or + 1-heptanol, or + 1-decanol. In addition, excess molar volumes, $V_{\text{m}}^{\text{E}}$, at the same conditions have been also determined using a densimeter Anton Paar model DSA 5000 for the benzylamine + heptane mixture. The $H_{\text{m}}^{\text{E}}$ of this solution is large and positive since at 298.15 K the system temperature is close to its upper critical solution temperature. Thus, systems with n-alkanes show positive deviations from the Raoult's law. The measured $|V_{\text{m}}^{\text{E}}|$ values are low, indicating the existence of large structural effects. $H_{\text{m}}^{\text{E}}$ values of mixtures involving 1-alkanols are large and negative. That is, interactions between unlike molecules are dominant and the systems are characterized by negative deviations from Raoult's law. It is shown that the enthalpy of the hydrogen bonding between molecules of 1-alkanol and benzyalmine are more negative than those between 1-alkanol molecules. The $V_{\text{m}}^{\text{E}}$ values of the systems with 1-alkanols are also large and negative, and are determined mainly by interactional effects since they increase in line with $H_{\text{m}}^{\text{E}}$ and with the alcohol size. The different contributions to $H_{\text{m}}^{\text{E}}$ have been evaluated. The systems have been studied using the DISQUAC and ERAS models. ERAS describes correctly the $V_{\text{m}}^{\text{E}}$ function. DISQUAC largely improves ERAS results on $H_{\text{m}}^{\text{E}}$ or on excess molar heat capacities at constant pressure for the mixtures with 1-alkanols, which underlines that physical interactions are very relevant in such solutions.

Comments Regarding "Measurement and Modeling of Excess Molar Volume and Excess Enthalpy of n-Tridecane or n-Tetradecane with Decalin by Application of PFP Theory"

Measurement and Modeling of Excess Molar Volume and Excess Enthalpy of n-Tridecane or n-Tetradecane with Decalin by Application of PFP Theory

Comments on "Fundamental properties and intermolecular interaction of triethylene glycol + ethylenediamine aqueous solution for CO 2 capture"

Excess molar volume along with viscosity and refractive index for binary systems of tricyclo[5.2.1.02.6]decane with five cycloalkanes

Excess Molar Volumes of N -Alkanes-thiophene Mixtures at 25°C

Densities and Viscosities for the Ternary System of Decalin + Methylcyclohexane + Cyclopentanol and Corresponding Binaries at T = 293.15 to 343.15 K

Enthalpies of Mixing of Ternary Alkane Mixtures with Branched Chain Components

Excess Molar Enthalpies of Methyl Acetate and (1-Propanol, 2-Propanol, 1-Butanol, 2-Butanol, and 1-Pentanol) at T = (298.15 and 308.15) K and P = (5.0 and 10.0) MPa

Thermodynamic Study of Binary Mixtures of Tricyclo[5.2.1.02.6]decane with N-methylpiperazine or Triethylamine at T=298.15–323.15K

Excess Molar Volume along with Viscosity, Flash Point, and Refractive Index for Binary Mixtures of Cis-Decalin or Trans-Decalin with C9 to C11 N-Alkanes

Excess Molar Volume along with Viscosity, Refractive Index and Relative Permittivity for Binary Mixtures of Exo -Tetrahydrodicyclopentadiene with Four Octane Isomers

Densities and Viscosities of the Ternary System Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + 1,2,3,4-Tetrahydronaphthalene (3) and the Corresponding Binary Systems at T = (293.15–333.15) K

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Thermodynamics of mixtures containing amines. XVII. Excess molar enthalpy and volume measurements for benzylamine + heptane or + 1-alkanol mixtures at 298.15 K. Application of the DISQUAC and ERAS models

High-pressure Densities of N-Decane+o-xylene Mixtures: Measurement and Modelling

Density, Viscosity, and Vapor Pressure for Binary Mixtures of Tricyclo [5.2.1.02.6] Decane and Diethyl Carbonate

Thermodynamics of mixtures with strong negative deviations from Raoult's law. XVIII: Excess molar enthalpies for the (1-alkanol + cyclohexylamine) systems at 298.15 K and modelling

Densities and viscosities of binary mixtures of exo - tetrahydrodicyclopentadiene with N -undecane or N -tetradecane at T = (293.15 to 313.15) K

Density, Viscosity, And Vapor Pressure For Binary Mixtures Of Tricyclo [5.2.1.0(2.6)] Decane And Diethyl Carbonate

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Densities and Viscosities of Ternary System N-Dodecane (1) + Bicyclohexyl (2) + N-Butanol (3) and Corresponding Binaries at T = (293.15 to 333.15) K