Abstract:The simultaneous upcycling of all components in lignocellulosic biomass and the greenhouse gas CO2 presents an attractive opportunity to synthesise sustainable and valuable chemicals. However, this approach is challenging to realise due to the difficulty of implementing a solution process to convert a robust and complex solid (lignocellulose) together with a barely soluble and stable gas (CO2). Herein, we present the complete oxidative valorisation of lignocellulose coupled to the reduction of low concentration CO2 through a three-stage fractionation-photocatalysis-electrolysis process. Lignocellulose from white birch wood was first pre-treated using an acidic solution to generate predominantly cellulosic- and lignin-based fractions. The solid cellulosic-based fraction was solubilised using cellulase (a cellulose depolymerising enzyme), followed by photocatalytic oxidation to formate with concomitant reduction of CO2 to syngas (a gas mixture of CO and H2) using a phosphonate-containing cobalt(ii) bis(terpyridine) catalyst immobilised onto TiO2 nanoparticles. Photocatalysis generated 27.9 ± 2.0 μmolCO gTiO2-1 (TONCO = 2.8 ± 0.2; 16% CO selectivity) and 147.7 ± 12.0 μmolformate gTiO2-1 after 24 h solar light irradiation under 20 vol% CO2 in N2. The soluble lignin-based fraction was oxidised in an electrolyser to the value-added chemicals vanillin (0.62 g kglignin-1) and syringaldehyde (1.65 g kglignin-1) at the anode, while diluted CO2 (20 vol%) was converted to CO (20.5 ± 0.2 μmolCO cm-2 in 4 h) at a Co(ii) porphyrin catalyst modified cathode (TONCO = 707 ± 7; 78% CO selectivity) at an applied voltage of -3 V. We thus demonstrate the complete valorisation of solid and a gaseous waste stream in a liquid phase process by combining fractioning, photo- and electrocatalysis using molecular hybrid nanomaterials assembled from earth abundant elements.

Promoting transfer of endogenous electrons well increases the carbon and energy efficiency of lignocellulosic biomass conversion to fuels and chemicals

Engineering Functional Hydrochar Based Catalyst with Corn Stover and Model Components for Efficient Glucose Isomerization

Bioconversion of corn stover hydrolysate to ethanol by a recombinant yeast strain

Coupling Pretreatment of Lignocellulosic Biomass for Enzymatic Hydrolysis with Electrochemical Reduction of CO2 for Production of Formic Acid

Lactic Acid Production from Cellulosic Material by Synergetic Hydrolysis and Fermentation.

All-iron Ions Mediated Electron Transfer for Biomass Pretreatment Coupling with Direct Generation of Electricity from Lignocellulose.

Efficient conversion of hemicellulose into high-value product and electric power by enzyme-engineered bacterial consortia

Ferricyanide and vanadyl (V) mediated electron transfer for converting lignin to electricity by liquid flow fuel cell with power density reaching 200 mW/cm<SUP>2</SUP>

Polyoxometalate‐mediated Lignin Oxidation for Efficient Enzymatic Production of Sugars and Generation of Electricity from Lignocellulosic Biomass

Making the biochemical conversion of lignocellulose more robust

A coupled electrocatalytic system with reduced energy input for CO2 reduction and biomass valorization

An integrated lignocellulose biorefinery process: Two-step sequential treatment with formic acid for efficiently producing ethanol and furfural from corn cobs

Lignocellulosic Biomass As Sustainable Feedstock and Materials for Power Generation and Energy Storage

Process evaluation of simulated novel cellulosic ethanol biorefineries coupled with lignin thermochemical conversion

Electrochemical Reduction of Carbon Dioxide to Produce Formic Acid Coupled with Oxidative Conversion of Biomass

Enhanced the energy conversion of corn stalk via co-production of photo-fermentation biohydrogen and bioethanol

[Process strategy for ethanol production from lignocellulose feedstock under extremely low water usage and high solids loading conditions]

Synchronous bio-oil upgrading and CO 2 fixation by co-electrolysis

Valorisation of lignocellulose and low concentration CO2 using a fractionation-photocatalysis-electrolysis process

Ethanol production by simultaneous saccharification and cofermentation of pretreated corn stalk

Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2