Abstract:This paper presents a comparison between two design methodologies applied to permanent magnet synchronous machines for hybrid and electric vehicles (HEVs and EVs). Both methodologies are based on 2D finite element models and coupled to a genetic algorithm to optimize complex non-linear geometries such as multi-layer permanent magnet machines. To reduce the computation duration to evaluate Induced Voltage and Iron Losses for a given electrical machine configuration, a new methodology based on geometrical symmetries and magnetic symmetries are used and is detailed. Two electromagnetic models have been developed and used in the design stage. The first model was the stepped rotor position finite element analysis called abc model which considered the spatial harmonics without any approximation of the waveform of flux linkage inside the stator, and the second model was based on a fixed rotor position called dq model, with the approximation that the waveform of flux linkage inside the stator was sinuous. These two methodologies are applied to the design of a synchronous machine for HEVs and EVs applications. Design results and performances are analyzed, and the advantages and drawbacks of each methodology are presented. It was found that the dq model is at least 5 times faster than the abc model with high precision for both the torque and induce voltage evaluation in most cases. However, it is not the case for the iron losses computation. The iron loss model based on dq model is less accurate than the abc model with a relative deviation from the abc model greater than 70% at high control angle. The choice of the electromagnetic model during the optimization process will therefore influence the geometry and the performances of the obtained electrical machine after the optimization.

The hybrid algorithms in constrained optimization of the permanent magnet motors

Design and Torque Optimization of Single-phase Hybrid Switched Reluctance Motors

Advanced Computational-Time Reduction Technology of Nonlinear Fourier-Based and Magnetic Circuit Hybrid Model

A Hybrid Multi-Objective Optimization Method and Its Application to Electromagnetic Device Designs

Hybrid Multiobjective Optimization Algorithm for PM Motor Design

A Hybrid Algorithm Based on NSGA-II and MOPSO for Multi-objective Designs of Electromagnetic Devices

Optimization Design of Permanent Magnet Synchronous Motor Based on Multi-Objective Artificial Hummingbird Algorithm

Multi-Objective Optimal Design of High-Speed Surface-Mounted Permanent Magnet Synchronous Motor for Magnetically Levitated Flywheel Energy Storage System

Multi-Objective Grey Wolf Optimization Algorithm for Solving Real-World BLDC Motor Design Problem

Application of Stochastic Method to Optimum Design of Energy-Efficient Induction Motors with a Target of LCC

Performance Comparison and Optimization of a PMSM Based on Hybrid-Type Permanent Magnet with Two Kinds of Rotor Topology

Sequential Subspace Optimization Design of a Dual Three-Phase Permanent Magnet Synchronous Hub Motor Based on NSGA III

Optimization of electromagnetic problems by using a hybrid algorithm combining, the annealing evolution algorithm with the Hooke-Jeeves algorithm

A Multi-Objective Topology Optimization Methodology and Its Application to Electromagnetic Actuator Designs

Nonlinear Analytical Model-Embedded Optimal Design for ER-PMSM

Multi-Objective Optimization of the Halbach Array Permanent Magnet Spherical Motor Based on Support Vector Machine

A Hybrid Smart Quantum Particle Swarm Optimization for Multimodal Electromagnetic Design Problems.

A hybrid algorithm of grey wolf optimizer and harris hawks optimization for solving global optimization problems with improved convergence performance

Analytical Investigation and Heuristic Optimization of Surface Mounted Permanent Magnet Machines With Hybrid Magnetic Structure

Design Optimization of Multi-Layer Permanent Magnet Synchronous Machines for Electric Vehicle Applications

Multi-Physical Field Optimization Analysis Of High-Speed Permanent Magnet Synchronous Motor Based On Nsga-Ii Algorithm