Abstract:The progression of computer control in the petroleum refining industry from Direct Digital Control (DDC) in the 1960s to Model Predictive Control and Real-Time Optimization (RTO) in the 1990s is briefly reviewed. The authors’ personal experience is used to illustrate the rapid advances in application of this constantly changing technology.The closed-loop optimization of the catalytic reforming process at the Sunoco refinery in Sarnia, Ontario, Canada will be described in sufficient detail to illustrate the complexity, challenges and practical solutions encountered during the implementation of this unique real-time optimizer.The unit operations are described by steady-state, open equation-based, mechanistic models. Global spline collocation is used to solve the differential equations associated with the reactor models and the catalytic deactivation over time. The entire set of non-linear equations is solved simultaneously using a successive quadratic programming method designed for these large-scale optimization problems.Using the models of the plant which are appropriate at specified times during the time-to-shutdown, the optimization determines that trajectory of operating conditions over the catalyst life which maximizes the total profit over that period. At the same time, the optimization accounts for catalyst deactivation over this period, thus ensuring that the catalyst does not deactivate too fast or leave unused activity. The optimization honours all equipment constraints, product qualities, and production requirements. Model parameters are estimated continuously using on-line data, thus ensuring that the model matches the plant at all times. The optimizer sends the required setpoints for the current operation directly to the model predictive controller that controls the whole plant. The optimizer is activated when steady state operation is achieved, about seven or eight times daily.An in-plant experimental program is established in which the effluent from the four reactors is periodically sampled and analyzed. These analyses along with on-line operating data and the process model are used to estimate the reaction parameters and the catalyst activity in each reactor.After the formulation of the process model, the optimization system, and the actual operating experience of the reformer RTO have been discussed, the authors’ vision for the near future in advanced process control and process optimization will be elucidated, concluding with some challenges for both the academic and technology provider communities.

Iterative real-time optimization of a reductive amination process in a thermomorphic multiphase system

Scalable Multi-Objective Optimization of Industrial Purified Terephthalic Acid (PTA) Oxidation Process

Iterative Real-Time Optimization Scheme for Optimal Operation of Chemical Processes under Uncertainty: Proof of Concept in a Miniplant

Iterative real-time optimization of a membrane pilot plant

A Retrofit Hierarchical Architecture for Real-Time Optimization and Control Integration

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Modifier Adaptation methodology based on transient and static measurements for RTO to cope with structural uncertainty

Migrative Reductive Amination of Ketones Enabled by Multitasking Reagents

Real-time Optimization of Acetaldehyde Production Process

RTO with Modifier Adaptation Method Applied to the FCC Uint

Structure based model reduction in real-time optimization

Real-time refinery optimization with reduced-order fluidized catalytic cracker model and surrogate-based trust region filter method

Real-time Optimization for Chemical Processes Based on On-Line Modeling of Controlled Variables

Mnemonic Enhancement Real-Time Optimization with Modified Barycentric Interpolation for Process Systems

Sensitivity-Based Mnemonic Enhancement Optimization (S-Meo) For Real-Time Optimization Of Chemical Process

The Road to Advanced Process Control: From DDC to Real-Time Optimization and Beyond

Real-time optimization modifier adaptation approach using quadratic approximation of the plant-model mismatch function

Review of Real Time Optimization in the Chemical Process Industries

Design and application of advanced process control and real-time optimization system for reforming reaction unit

A Two-Phase Approach Optimizing Productivity for a mAb-producing CHO Cell Culture Process Using Dynamic Response Surface Methodology Models

Optimization of the Countercurrent Continuous Reforming Process Based on Equation-Oriented Modeling and the SQP Algorithm