Magneto-Responsive Biopolymer Composite Based on Plasticized Poly(Butylene Succinate-Co-Butylene Adipate) and Fe3O4 for Flexible Actuator Application

Natlita Thummarungsan,Anuvat Sirivat

DOI: https://doi.org/10.1007/s10924-024-03190-z

IF: 4.705

2024-01-20

Journal of Polymers and the Environment

Abstract:The magnetic soft materials that can actuate in response to the external magnetic stimulus are of a high potential for the soft robotics and biomedical applications. This work reports on the new magneto-responsive materials based on the bio-based poly(butylene succinate-co-butylene adipate) (PBSA). The synthesized magnetite (Fe 3 O 4 ) nanoparticles were incorporated into the PBSA biopolymer matrix with the Fe 3 O 4 content up to 3 wt%. The addition of Fe 3 O 4 enhanced the magnetic and mechanical properties of the composites; all composites exhibited only the slight increases in the storage modulus in the presence of the external magnetic flux density of 10,000 G. The 3%v/v Fe 3 O 4 /PBSA composite exhibited only a small increase in the storage modulus from 7.23 × 10 5 Pa to 7.55 × 10 5 Pa without and with the magnetic flux density 10,000 G, respectively. The slight increases observed indicate the retained and favorable material flexibility and softness favoring the magnetic actuation. For the bending performance, the largest bending distance of 15.6 mm with the response time within 10 s and the maximum magnetophoretic force of 0.14 mN under the applied low magnetic flux density of 1300 G were obtained from the composite with the Fe 3 O 4 content of 3.0%v/v with the composite magnetization of 1.719 emu g − 1 . The fabricated soft magneto-responsive materials based on PBSA and Fe 3 O 4 nanoparticle are shown here to be potential as soft magneto-responsive materials in the field of actuator such as soft robotic components.

engineering, environmental,polymer science