Abstract:Asphalt aging caused by light, oxygen, water, and so forth (coupling aging) during construction and service of asphalt pavement is a major cause of pavement damage. In this study, the basic test (required in the construction regulations), rheological test, anti-fatigue test, Fourier-transform infrared spectroscopy test (FTIR), and dielectric property test of asphalt were conducted to investigate the antiaging performance and aging mechanism of matrix asphalt (90#) and styrenic block copolymers (SBS)-modified asphalt during coupling aging (including the effect of heat, oxygen, ultraviolet, and water). The method of quantitative evaluation of coupling aging process was discussed using the aforementioned tests, and the quantitative correspondence between performance and components based on dielectric properties was established, an equation was also established to predict the properties of asphalt by using dielectric constant. The results show that (1) the aging mechanisms of asphalt caused by temperature, oxygen, ultraviolet light, and water are different, so the performance of asphalt after those four kinds of aging is different; (2) the penetration, viscosity, principal curve, fatigue life, and sulfoxide index of asphalt change regularly with the increase of aging, and can be used as quantitative indexes to describe the aging degree or aging mechanism of asphalt; and (3) it is feasible to divide asphalt components, determine the aging mechanism of asphalt, and describe and predict the performance of asphalt based on the dielectric properties of asphalt. This study reveals the influence of coupling aging on the performance of asphalt from a new perspective, which has significance for the study of the mechanism of asphalt aging and the guidance of asphalt pavement construction.

Research on the thermal oxygen aging mechanism of the composite curing system epoxy asphalt with different curing agent proportions on the molecular scale

Microscopic Analysis of Aging Effects on the Adhesion Properties Between Asphalt and Mineral Aggregate

Time-temperature-aging-depth Shift Functions for Dynamic Modulus Master Curves of Asphalt Mixtures

Molecular dynamics study of cross‐linking degrees effect on the aging resistance of epoxy asphalt: Insights from oxygen diffusion

Combustion Performance of Thermally Aged Asphalt Blended with ATH/ZB Flame Retardant

Oxidative aging of epoxy asphalt

Influence of curing agent ratio, asphalt content and crosslinking degree on the compatibility and component distribution of epoxy asphalt in compound curing agent system

Study on Ultraviolet Aging Performance of Composite Modified Asphalt Based on Rheological Properties and Molecular Dynamics Simulation

Improvements of Developed Graphite Based Composite Anti-Aging Agent on Thermal Aging Properties of Asphalt

A Molecular Dynamics Approach to the Impacts of Oxidative Aging on the Engineering Characteristics of Asphalt

Study on curing kinetics of epoxy system and DFT simulation

Study of the Molecular Components and Rheological Properties of Asphalt after Long-Term Aging under the Action of Moisture

Aging resistance of polyurethane/graphene oxide composite modified asphalt: performance evaluation and molecular dynamics simulation

Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics

Study on aging of lignin modified asphalt under thermogravimetric conditions

Aging effects on asphalt adhesive properties: molecular dynamics simulation of chemical composition and structural changes

Structure-performance evolution on thermal-oxidative aging of CeO2/SBS co-modified asphalt

Modeling the Oxidative Aging Kinetics and Pathways of Asphalt: A ReaxFF Molecular Dynamics Study

Evaluation and Mechanism Analysis of Coupling Factors on Asphalt Aging Based on Dielectric Properties

Investigation of the effects of chemical modification and oxidative aging on the properties and compatibility of rubber asphalt based on thermodynamic principles

Evaluation of the Interaction and Aging Behavior for Asphalt Binders with Epoxy Resin and Phase Change Materials