Abstract:Injection molding is one of the polymer molding methods. Product quality mainly can be affected by temperature and pressure. To observe the process of the melt forming in the mold, it is required to monitor the signal with the sensor. To achieve the purpose of robust molding, this research provides a new design-process window architecture based on machine learning of the injection product quality assessment. The process window is also known as the forming area map. The monitored value for defective products will be above or below the variable limit. The process is set to the center of this window so that any variation within the window will still result in an acceptable product. There are some potential problems in the current process. First, the conventional process window uses a small number of process variables as monitoring indicators, and it cannot provide stronger monitoring indicators. Second, most of the conventional process windows are 2-D and there are many monitoring windows, so the information that can be monitored is limited. Therefore, product quality cannot be effectively monitored without proper selection of important factors. Finally, the current process window can only provide information in the process and cannot make product quality prediction. In order to solve the above problems, a machine learning method is proposed to design the process window. The random forest classifier and regressor are used to predict the product quality. In order to improve the usability of the factor, the design of the proposed new variable is derived from the classical formula of thermodynamics (heat conduction). Using existing factors and proposing time-based feature changes can better represent the molding process as a whole. Based on the experimental results, the proposed variables can effectively increase the predictive performance of random forest model for quality assessment. The research results make a satisfactory result to the quality assessment of industria- injection molding. The accuracy of the prediction results is 100%. Moreover, it can be found from the 3-D process window that the data are very concentrated and can be clearly classified by the hyperplane, which is defined as the shortest distance between two clusters, and this space is the boundary of the process window. Therefore, compared with the past, the judgment boundary based on the random forest process window is no longer a simple boundary. Random forests can provide more accurate visualization boundaries.

Design of intelligent manufacturing IoT sensing system for polymer process monitoring

Optimal Online Soft Sensor for Product Quality Monitoring in Propylene Polymerization Process

A Novel In-Line Polymer Melt Viscosity Sensing System of Integrated Soft Sensor and Machine Learning

Quality Control in the Polypropylene Manufacturing Process: an Efficient, Data-Driven Approach

Design and Development of Computer Integrated Control System for Spheripol Propylene Polymerization Unit

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Soft Sensor for Melting Flow Rate Prediction based on Data-enhanced Classification Method

Intelligent manufacturing production line data monitoring system for industrial internet of things

A Soft Sensor Based on Adaptive Fuzzy Neural Network and Support Vector Regression for Industrial Melt Index Prediction

Sensor Fusion for Simultaneous Estimation of In-Plane Permeability and Porosity of Fiber Reinforcement in Resin Transfer Molding

In-situ ultrasonic measurement of molten polymers during injection molding

Real-time polymer flow state monitoring during fused filament fabrication based on acoustic emission

In Situ Surface Defect Detection in Polymer Tube Extrusion: AI-Based Real-Time Monitoring Approach

A Nondestructive Online Method for Monitoring the Injection Molding Process by Collecting and Analyzing Machine Running Data

A Novel Sensing Feature Extraction Based on Mold Temperature and Melt Pressure for Plastic Injection Molding Quality Assessment

Inclusion of IoT technology in additive manufacturing: Machine learning-based adaptive bead modeling and path planning for sustainable wire arc additive manufacturing and process optimization

Using intelligent technology and real-time feedback algorithm to improve manufacturing process in IoT semiconductor industry

Multi‐source data‐driven approach for prediction of melt density during polymer compounding

Monitoring the resin infusion manufacturing process under industrial environment using distributed sensors

A deep mixed-effects modeling approach for real-time monitoring of metal additive manufacturing process

Development and application of intelligent monitoring system for rapid tooling applied in low-pressure injection molding