Abstract:High-performance (Ti, Nb)B/Ti2AlNb composites are promising high-temperature structural materials for the new generation of aerospace engines. The interfaces between the (Ti, Nb)B reinforcement and matrix phases (i.e. O-Ti2AlNb, α2-Ti3Al and B2 phases) affect the mechanical properties of the composites largely. In this study, the properties of the interfaces were systematically revealed after fabricating a (Ti, Nb)B/Ti2AlNb composite by low-energy ball-milling and spark plasma sintering (SPS). A high-resolution transmission electron microscopy (HRTEM) was adopted to evaluate the crystallographic orientation relationships (ORs) and interfacial structures. (Ti, Nb)B maintains three coherent interfaces with the matrix, and the preferred ORs between them can be expressed as [1 1 <math>2¯</math> 0]α2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 0 0)α2//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 0]O//[0 1 0](Ti, Nb)B and (1 1 0)O//(1 0 0)(Ti, Nb)B; [1 <math>1¯</math> 1]B2//[0 1 0](Ti, Nb)B and (<math>1¯</math> 1 2)B2//(1 0 0)(Ti, Nb)B. The results of first-principles calculations indicated that the (<math>1¯</math> 1 0 0)α2/(1 0 0)(Ti, Nb)B interface possesses a higher bonding strength compared with the (1 1 0)O/(1 0 0)(Ti, Nb)B and (<math>1¯</math> 1 2)B2/(1 0 0)(Ti, Nb)B interfaces, and the (Ti, Nb)B reinforcement and the matrix are bonded through strong ionic bonds and weak covalent bonds. Moreover, based on Bramfitt's lattice mismatch theory, it was found that the (Ti, Nb)B reinforcement acts as an effective substrate in promoting the heterogeneous nucleation and preferred precipitation of the α2 phase. Suppressing the brittle α2 precipitate around the reinforcement improves the ductility of the composite obviously.

Effect of oxygen content on microstructure, mechanical properties, and electronic properties of β-Ti 3 Nb: A first-principles study

Effect of O addition on microstructure and mechanical properties of Ti-Nb alloys with various β stability

The roles of oxygen content on microstructural transformation, mechanical properties and corrosion resistance of Ti-Nb-based biomedical alloys with different β stabilities

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Mechanical Properties and Phase Stability of Ti-Nb-Ta-Zr-O Alloys

The Effect of Nb Doping on the Properties of Ti-Al Intermetallic Compounds Using First-Principles Calculations

Low Young’s Modulus Ti–Nb–O with High Strength and Good Plasticity

First-principles thermodynamic investigation on the α phases in TiO and TiNb binary system

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Strain glass transition in a metastable β Ti-Nb-O alloy with high oxygen content

First Principles Calculations of the Influence of Nitrogen Content on the Mechanical Properties of Α-Ti

First-Principles Study of the Influences of Oxygen Defects Upon the Electronic Properties of Nb-Doped Tio2 by Gga + U Methods

Influence of Nb and Mo Contents on Phase Stability and Elastic Property of Β-Type Ti-X Alloys

Influence of oxygen on microstructures and tensile properties of hot-rolled Ti-4Zr-xO alloys

First Principles Studies on the Elastic, Thermodynamic Properties and Electronic Structure of Ti15−xMoxSn Compounds

Influence of oxygen content on microstructure and mechanical properties of Ti–Nb–Ta–Zr alloy

Electronic Structure Of Ti2alnb (O Phase)

Effect of Oxygen on Static Recrystallization Behaviors of Biomedical Ti-Nb-Zr Alloys

Composition/Phase Structure and Properties of Titanium-Niobium Alloys

Crystallographic orientation relationships and interfacial structures between reinforcement and matrix phases in an in situ (Ti, Nb)B/Ti2AlNb composite