Dynamic performance of a power plant integrating with molten salt thermal energy storage

Congyu Wang,Fangyi Liu

DOI: https://doi.org/10.1016/j.applthermaleng.2024.125223

IF: 6.4

2024-12-18

Applied Thermal Engineering

Abstract:Integrating molten salt thermal energy storage in thermal power plants is a cost-effective approach to enhance operational flexibility, which has aroused broad attention in recent years. However, most of the existing studies were conducted based on steady-state models, thereby failing to reveal the dynamic characteristics, e.g., the achievable ramp rate for a thermal power plant integrated with molten salt thermal energy storage during the load variation process. This study addresses this knowledge gap by developing a well-validated dynamic model of a coal-fired thermal power plant integrated with molten salt thermal energy storage. Results indicate that integrating the molten salt thermal energy storage enlarges the load range of the power plant from 30 %∼100 % to 23.4 %∼100 %. During the load-decreasing process, the maximum ramp rate of the power plant increased from the original value of 1.82 %P N /min to 5.94 %P N /min. Moreover, during the load-increasing process, the maximum ramp rate ascends to 7.75 %P N /min, while the original value is only 1.79 %P N /min. For a round-trip process, upon integrating the molten salt thermal energy storage, the average fuel consumption rises from 305.5 g/kWh to 310.8 g/kWh, during which the equivalent round-trip efficiency of the molten salt thermal energy storage is 87.2 %. After the integration of molten salt thermal energy storage, the profit of the thermal power plant in the electricity market during the reference year is increased from 46.7 million USD to 52.1 million USD. The payback period is 2.1 years, demonstrating that this integration not only enhances the flexibility of the plant, but is also an economically attractive solution.

energy & fuels,engineering, mechanical,thermodynamics,mechanics