Abstract:The steady increase in the amount of large-sized orbital debris represents a substantial threat to satellite missions. Currently, many methods of cleaning near-Earth space with the use of various means based on various physical principles are considered. Out of them all, the active method using a rocket propulsion system is the most commonly implemented. Considering the high specific impulse, small size, and mass of electric propulsion systems, they are a particularly attractive choice as means of post-mission disposal. Despite their advantages, such systems have certain peculiarities that need to be considered in the process of designing and implementing modern post-mission disposal means. These peculiarities include the maximum time of a single firing of the electric propulsion system, the maximum time of the battery charging, and the time of operation of the control system. The purpose of this work is the determination the capabilities of the modern Hall thrusters ST-25 and ST-40 developed by Space Electric Thruster Systems in solving the problem of post-mission disposal of large-sized orbital debris from low-Earth orbits taking into account the limitations on the power supply system. To achieve this goal, methods of analysis, synthesis, comparison, and computer simulation were used. In the course of the carried-out research, the following problems were solved. A scheme for post-mission disposal of large-sized orbital debris from low-Earth orbit was developed with consideration of the use of an electric propulsion system. The dependence was determined of the minimum delta-v increment required for post-mission disposal of an object within 25 years on the initial altitude of the orbit and the ballistic coefficient of the orbital debris. The upper boundary of the combinations of masses of orbital debris, the altitude of the initial orbit, and the ballistic coefficient were determined, for which post-mission disposal from near-Earth orbits is possible with the use of electric propulsion systems. The obtained results can be used in solving problems of the development of modern means of active post-mission disposal of orbital debris with the use of Hall thrusters developed by Space Electric Thruster Systems

Inserting a Maximum-Mass Spacecraft into a Target Orbit Using a Limited-Thrust Engine with Releasing the Separable Part of Its Launch Vehicle into the Earth’s Atmosphere

Inserting a Maximum-Mass Spacecraft into a Target Orbit Using a Limited-Thrust Engine with Releasing the Separable Part of Its Launch Vehicle into the Earth's Atmosphere

Optimal thrust level for orbit insertion

Preliminary Design of Debris Removal Missions by Means of Simplified Models for Low-Thrust, Many-Revolution Transfers

Application of additional inflatable aerodynamic device to ensure the required degradation of the disposal orbit of large-size space debris

Multiple Space Debris Collecting Mission - Debris selection and Trajectory optimization

Designing Low-Thrust Transfers to High-Inclination Science Orbits via Hybrid Optimization

Direct Optimization of Low-thrust Many-revolution Earth-orbit Transfers

Advanced Inflatable De-Orbit Solutions for Derelict Satellites and Orbital Debris

A Low-Thrust Transfer Between the Earth–Moon and Sun–Earth Systems Based on Invariant Manifolds

Optimal Low-Thrust Orbit Transfers Made Easy: A Direct Approach

Design and Analysis of Cold Gas Thruster to De-Orbit the PSLV Debris

A novel calculation method for low-thrust transfer trajectories in the Earth-Moon restricted three-body problem

Optimal Design and Tracking Control of Low-Thrust Orbit Transfers Between Planar and Vertical Lyapunov Orbits

A mesh refinement method for low‐thrust orbit transfer problems

ESTIMATION OF THE POSSIBILITY OF USING ELECTRIC PROPULSION SYSTEMS FOR LARGE-SIZED ORBITAL DEBRIS POST-MISSION DISPOSAL

Optimization of low-thrust orbit transfers with constraints

Design and optimization of low-thrust orbit transfers

Low-Thrust Transfer Between Circular Orbits Using Natural Precession

Debris Engine: A Potential Thruster for Space Debris Removal

Capture of Near-Earth Objects with Low-Thrust Propulsion and Invariant Manifolds