Abstract:In this study, we successfully synthesized a TiO2/CuO nanocomposite using the aqueous extract of Impatiens tinctoria A.rich. leaf extract as a capping, reducing, and stabilizing agent for the first time in an environmentally friendly, low-cost, straightforward, and sustainable technique. Numerous characterization techniques such as ultraviolet-visible diffuse reflectance spectroscopy (UV-vis-DRS), photoluminescence (PL), Raman spectroscopy, Fourier-transform infrared (FTIR), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and high resolution TEM (HRTEM) were used to characterize the obtained TiO2/CuO nanocomposite. XRD verified that the TiO2/CuO nanocomposite has an average crystallite size of about 21 nm. The TEM result revealed an average particle size of 29 nm for the biosynthesized TiO2/CuO NC. The HRTEM analysis showed the presence of polycrystalline structures with the predominant lattice fringes 0.352 and 0.19 which were attributed to anatase phase TiO2 in the crystal plane of (101) and (200), respectively. The lattice fringes for monoclinic CuO were observed with values of 0.213 and 0.252 for the lattice planes of (111) and (111̅), respectively. The photoluminescence spectroscopic analysis revealed that the TiO2/CuO NC showed the lowest intensity compared to the pristine TiO2 and CuO indicating the reduction of exciton recombination in the case of the TiO2/CuO NC. The BET analysis showcased the formation of mesoporous materials with a surface area of 87.5 m2/g. The photocatalytic degradation performance of the biosynthesized TiO2, CuO, and TiO2/CuO nanomaterials against the potentially harmful MB dye was tested using the light source of a 150 tungsten-halogen lamp with a wavelength range of 360-2800 nm. The factors affecting photodegradation efficiencies like catalyst dose (20 mg), dye concentration(15 ppm), pH (9), and reaction time (90 min) were optimized for the degradation of the MB dye. The TiO2/CuO catalyst showed the highest degradation efficiency of 99% under the optimized conditions. The degradation rate of the MB dye in the presence of the TiO2/CuO NC was evaluated and found to be fitted to the pseudo-first-order kinetics with a rate constant of 0.03 min-1. The reusability test of the TiO2/CuO catalyst showed its good stability.

A Comparative Study of the individual and Mixed Oxide Nanostructures on Sunlight Driven Degradation of Methylene Blue Dye and Antimicrobial Efficacy

Facile synthesis of nickel oxide nanoparticles for the degradation of Methylene blue and Rhodamine B dye: a comparative study

A comparative analysis on the dye degradation efficiency of pure, Co, Ni and Mn-doped CuO nanoparticles

Surfactant-Assisted Synthesis of NiO-ZnO and NiO-CuO Nanocomposites for Enhanced Photocatalytic Degradation of Methylene Blue Under UV Light Irradiation

Experimental and DFT + U Investigations of the Cu1-xCdxO Nanoparticles Synthesized for Photocatalytic Degradation of Organic Pollutants: Environmental Application

A new approach to the synthesis of CuMoO 4 nanoparticles with mechanistic insight into the sunlight-assisted degradation of textile pollutants and antibacterial activity evaluation

Fabrication and assessment of CuO and NiO-infused MnO 2 nanocomposites: Characterization, methylene blue degradation, and antibacterial efficacy

Structure, morphology, composition, optical properties and catalytic activity of nanomaterials CuO, NiO, CuO/NiO using methylene blue

Synthesis, Characterization, Antibacterial and Photocatalytic Studies of Metal Oxides Coupled Nanocomposites

Photocatalytic Degradation of Methylene Blue by ZnO/NiFe2O4 Nanoparticles

Transition metal ion-doped In2O3 nanocubes: investigation of their photocatalytic degradation activity under sunlight

Enhancement in dye removal by photocatalytic degradation using metal oxide nanoparticles embedded on activated carbon powder and study of their antibacterial activity

Photocatalytic effect of CuO nanoparticles flower-like 3D nanostructures under visible light irradiation with the degradation of methylene blue (MB) dye for environmental application

Phase tunable nickel doped Mn3O4 nanoparticle synthesis by chemical precipitation: kinetic study on dye degradation

Study the influence of silver and cobalt on the photocatalytic activity of copper oxide nanoparticles for the degradation of methyl orange and real wastewater dyes

Facile combustion derived synthesis of copper oxide nanoparticles: Application towards photocatalytic, electrochemical and DNA cleavage studies

Comparative analysis of the antimicrobial activity and dye degradation of metal oxides (TiO2, CdO, Mn2O3, and ZnO) nanoparticles using a green approach

Biosynthesis of TiO2/CuO and Its Application for the Photocatalytic Removal of the Methylene Blue Dye

Visible-Light Induced Degradation of Norfloxacin and Methylene Blue Using Easily Recoverable NiO/ZnO Heterostructures: Analysis of Efficacy, Stability, Reaction Mechanism and Degradation Pathway

Bisulfite Assisted Photocatalytic Degradation of Methylene Blue by Ni-Fe-Mn Oxide from MnO4 Intercalated LDH

Photocatalytic performance of pristine NiO and Ni6MnO8 nanopowders in degradation of Rose Bengal dye