Abstract:A novel, simple and efficient method by the combination of hydroxyl radicals and electrical exfoliation of graphite for the green production of high-quality graphene from graphite was first developed in our self-manufactured exfoliation apparatus. In this work, we focused on the investigation of the roles of various electrolyte systems for the exfoliation of graphite. Sodium chloride, sodium hydroxide, poly vinyl pyrrolidone (PVP), dodecyl trimethyl ammonium bromide (DTAB) and sodium dodecyl benzene sulfonate (SDBS) were tested as the electrolyte. The yields of the graphene product in sodium hydroxide, PVP, DTAB, sodium chloride and SDBS electrolyte system were 32.9%, 34.0%, 45.2%, 77.5% and 83.5%, respectively. The experimental result demonstrated that graphite can be successfully exfoliated to graphene in these electrolytes, with SDBS showing the best exfoliation effect. We further investigated the effects of process parameters on the graphite exfoliation in the SDBS system by single factor experiments. The obtained optimal process parameters were as follows: graphite dosage, 5.0 g; SDBS solution concentration, 10.0% (w/v); applied current strength, 10 mA; air flow, 1.0 L h-1; and exfoliation time, 3 h. At these conditions, the yield of the graphene product was 89.7%. TEM results revealed that the graphene product possessed the characteristic features of a thin-layer graphene sheet. XRD results showed that the graphene products still maintained the structures of carbon atoms or molecules. FT-IR and Raman results indicated that the products exhibited the characteristic peaks and the absorption peaks of graphene. AFM test results revealed that the layer number of graphene product obtained was about 2, while the layer numbers of the graphene products obtained from sodium hydroxide, PVP, DTAB and sodium chloride systems were 30, 20, 4 and 3, respectively, at the same experimental conditions. The observed exfoliation effect in the SDBS system was due to its good electrical conductivity, which was favorable for the formation of hydroxyl radicals in exfoliation. Furthermore, SDBS has good hydrophilic properties and can enable even dispersion of graphite in the system. These two effects facilitated the exfoliation of graphite to form good-quality graphene. SDBS as the electrolyte did not corrode the electrode, and it could be recycled; also, it does not pollute the environment and reduces the production cost, which is favorable for mass production.

Green-extraction of carbon thin films from natural mineral Shungite

Environment-Friendly Method To Produce Graphene That Employs Vitamin C and Amino Acid

Environmentally Friendly Approaches Toward the Production of Processable Graphene by Exfoliation of Graphite Using Ionic Liquid

Shungite (Mineralized Carbon) as a Promising Electrode Material for Electroanalysis

High yield production of graphene by liquid phase exfoliation of graphite

Sustainable Production of Biomass‐Derived Graphite and Graphene Conductive Inks from Biochar

High-concentration graphene dispersions prepared via exfoliation of graphite in PVA/H2O green solvent system using high-shear forces

Mass scale production and purification of graphite oxide from Sri Lankan vein graphite and spectroscopic characterization

Green and facile production of high-quality graphene from graphite by the combination of hydroxyl radicals and electrical exfoliation in different electrolyte systems

Reduced Graphene Oxide and Its Natural Counterpart Shungite Carbon

The electrochemical preparation and characterization of sulfur-free expanded graphite

A Non-Dispersion Strategy for Large-Scale Production of Ultra-High Concentration Graphene Slurries in Water

Towards Super-Clean Graphene.

High yield of graphene by dispersant-free liquid exfoliation of mechanochemically delaminated graphite

Shungite in view of neutron scattering

Identification of High Performance Solvents for the Sustainable Processing of Graphene

Development of a chemical-free floatation technology for the purification of vein graphite and characterization of the products

High-yield production of graphene flakes using a novel electrochemical/mechanical hybrid exfoliation

The use of industrial molasses waste in the performant synthesis of fewlayer graphene (and its Au/Ag nanoparticles nanocomposites): Photocatalytic and supercapacitance applications

A Novel and Large-Scale Rapid Green Synthesis of Few-Layer and Multi-Layer Graphene

Construction of Three-Dimensional Conductive Graphitic Architecture by Highly Efficient Electrochemical Exfoliation