Abstract:Copper sulfide (CuS) sorbent exhibits great potential for gaseous elemental mercury (Hg0) decontamination, but it still suffers from a narrow operating temperature. Therefore, designing advanced CuS sorbents that have a high activity level for capturing Hg0 and thermal stability at a high temperature range is challenging. Herein, we propose a metal doping strategy to fabricate a bimetallic sulfide adsorbent. Benefiting the unique structure and composition, a mesoporous structure and an abundance of unsaturated sulfur sites ensure that CuxCo(1-x)Sy provides a desirable level of adsorption for Hg0. The experimental results indicate the optimum Co doping mass concentration of 5 %. The Cu0.95Co0.05Sy not only performs satisfactory Hg0 adsorption at elevated temperatures (Hg0 average adsorption efficiency of over 97.3 %, Hg0 average adsorption rate of over 2.7 μg/g/min), but also presents an exciting regeneration and recycle performance (a Hg0 adsorption efficiency of over 94 % after 10 cycles). The adsorption capacity of Cu0.95Co0.05Sy at the breakthrough threshold of 25 % reaches 5.22 mg/g, surpassing most of metal sulfide sorbents for Hg0 immobilization at 150 °C. As far as Hg0 adsorption is concerned, the composition of typical smelting flue gases has almost no effect. According to further studies, unsaturated coordination short-chain sulfur (S22-) sites are essential for adsorption of Hg0 and are capable of directly forming α-HgS from Hg0. In both the contrast experiment and density functional theory calculations, the cobalt doping strategy enhances the thermal stability of the active S22- ligand and the Hg0 adsorption properties. This study not only provide a prospective adsorbent for Hg0 sequestration at wide temperature range, but also explores a method of utilizing gaseous contaminants for resource utilization.

Mercury (II) adsorption and gaseous mercury re-emission inhibition from seawater flue gas desulfurization (SFGD) wastewater by Fe-Cu bimetallic modified activated carbon

Review of Elemental Mercury (hg0) Removal by CuO-based Materials

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Selenium-modified activated coke: a high-capacity and facile designed Hg0 adsorbent for coal-fired flue gas

Performance of CuCl2 Solution on Washing Regeneration of Activated Carbon for Mercury Removal in Syngas

Removal of mercury from flue gases over iron modified activated carbon made by in situ ion exchange method

Cu‐modified Fe‐Mn magnetic mercury adsorbent and anti‐SO2 characteristic

Ion exchange resin derived magnetic activated carbon as recyclable and regenerable adsorbent for removal of mercury from flue gases

Fabrication of Novel Nanosulfur-Modified Activated Carbon Adsorbent for Elemental Mercury Removal from Flue Gas

Copper selenide enhanced magnetic biochar for elemental mercury removal from coal combustion flue gas

Effective Capture and Immobilization of Hg 0 from Flue Gas Using a Novel Selenium-Functionalized SrFeO 3-δ /HNTs Half-Metal Composite: Adsorption, Photocatalytic Oxidation, and Mechanism

Microwave Enhanced Solidification of Gaseous Mercury from Flue Gas by a Novel Selenium Functional FeCo-LDH Based Halloysite Adsorbent

Promotion effect of Cu doping on mercury removal properties of magnetic MnFe2O4 materials with high adsorption capacity

Promoting elemental mercury immobilization performance from smelting flue gas over a wide temperature range via cobalt-doped copper sulfide adsorbents

Outstanding performance of reproducible sulfureted Fe-Ti spinel for the centralized control of Hg (both gaseous Hg 0 and aqueous Hg 2+ ) emitted from coal-fired power plants with seawater flue gas desulfurization

Structure-activity relationships, product species distribution and the mechanism of effect of multi-component flue gas on Hg0 adsorption and oxidation over CuO/ACs