Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

Fascinating Bifunctional Electrocatalytic Activity via a Mesoporous Structured FeMnO 3 @ZrO 2 Matrix as an Efficient Cathode for Li–O 2 Batteries

Metal-organic framework-derived ZrO2/NiCo2O4/graphene mesoporous cake-like structure as enhanced bifunctional electrocatalytic cathodes for long life Li-O2 batteries

Promoting Bifunctional Oxygen Catalyst Activity of Double-Perovskite-Type Cubic Nanocrystallites for Aqueous and Quasi-Solid-State Rechargeable Zinc-Air Batteries

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

Fe<sub>3</sub>O<sub>4</sub>/Co<sub>3</sub>O<sub>4</sub> binary oxides as bifunctional electrocatalysts for rechargeable Zn-air batteries by one-pot pyrolysis of zeolitic imidazolate frameworks

Micro‑meso-macroporous FeCo-N-C Derived from Hierarchical Bimetallic FeCo-ZIFs As Cathode Catalysts for Enhanced Li-O2 Batteries Performance

Facile Synthesis of Vertical Layered Double Hydroxides Nanosheets on Co@Carbon Nanoframes as Robust Bifunctional Oxygen Electrocatalysts for Rechargeable Zn–Air Batteries

Dual-active-site hierarchical architecture containing NiFe-LDH and ZIF-derived carbon-based framework composite as efficient bifunctional oxygen electrocatalysts for durable rechargeable Zn-air batteries

N-doped porous carbon nanofibers inlaid with hollow Co3O4 nanoparticles as an efficient bifunctional catalyst for rechargeable Li-O2 batteries

Efficient and Stable Dual-Active-Site of Core-Shell NiFe-Layered Double Hydroxide Anchored on FeMnON-N-Doped Carbon Nanotubes as Bifunctional Oxygen Electrocatalysts for Zn-Air Batteries

A Multi-Layered Fe2O3/graphene Composite with Mesopores As a Catalyst for Rechargeable Aprotic Lithium–oxygen Batteries

Multicomponent Spinel Metal Oxide Nanocomposites as High-Performance Bifunctional Catalysts in Zn–Air Batteries

Enhanced bifunctional oxygen electrochemical catalytic performance using La-doped CoFe 2 O 4 spinel supported by 3D-G for Zn-air batteries

Mesoporous Cobalt Molybdenum Nitride: A Highly Active Bifunctional Electrocatalyst And Its Application In Lithium-O-2 Batteries

A Grafted Hybrid Nanosheet Array Architecture Enables Efficient Bifunctional Oxygen Catalytic Electrodes for Rechargeable Lithium−Oxygen Batteries

Graphene Nanosheet-Wrapped Mesoporous La0.8Ce0.2Fe0.5Mn0.5O3 Perovskite Oxide Composite for Improved Oxygen Reaction Electro-Kinetics and Li-O2 Battery Application

Spatially Confined Sub-Nanometer Pt in RuO2 Nanosheet As Robust Bifunctional Oxygen Electrocatalyst for Stabilizing Li-O2 Batteries

FeCo/FeCoP encapsulated in N, Mn-codoped three-dimensional fluffy porous carbon nanostructures as highly efficient bifunctional electrocatalyst with multi-components synergistic catalysis for ultra-stable rechargeable Zn-air batteries

Amorphous MnO2 Lamellae Encapsulated Covalent Triazine Polymer‐Derived Multi‐Heteroatoms‐Doped Carbon for Orr/Oer Bifunctional Electrocatalysis

Efficient and Durable Bifunctional Oxygen Catalysts Based on NiFeO@MnOx Core-Shell Structures for Rechargeable Zn-Air Batteries

Heterogeneous Bimetallic Organic Coordination Polymer-Derived Co/Fe@NC Bifunctional Catalysts for Rechargeable Li–O 2 Batteries