Abstract:In recent years, advanced oxidation processes (AOPs) have indicated the greatest potential in the removal of stable organic compounds, including dyes. In this study, the ultraviolet light-emitting diodes (UV-LEDs) combined with chlorine was evaluated to remove Reactive Blue 19 (RB19) dye from aqueous solution. The effect of key experimental parameters including pH, initial chlorine concentration, initial dye concentration, and reaction time on the performance of UV-LED irradiation, UV-LED/chlorine, and the chlorination method for the removal of RB19 was studied in this research. Results showed that, more than 99% of RB19 was removed after 30 min of reaction time under optimized conditions (pH = 5, [chlorine] = 300 μM, and [RB19] = 20 mg L−1) with apparent kinetic rate constant (kapp) of 17.1 × 10−2 min−1 in UV-LED/chlorine process. However, for the chlorination method, removal efficiency was 64.7% (kapp = 3.41 × 10−2 min−1) with an apparent kinetic rate constant of 0.0341 min−1. Results also showed that UV-LED irradiation is not effective at all in removing RB19. The scavenging assay showed that OH• radicals (67.23%) had the highest contribution in RB19 removal in UV-LED/chlorine process while Cl• (17.82%) and Cl2-∙documentclass[12pt]{minimal}usepackage{amsmath}usepackage{wasysym}usepackage{amsfonts}usepackage{amssymb}usepackage{amsbsy}usepackage{mathrsfs}usepackage{upgreek}setlength{oddsidemargin}{-69pt}egin{document}$${mathrm{Cl}}_2^{-ullet }$$end{document} (8.56%) had a minor role in the degradation of the dye. The RB19 degradation kinetics analysis revealed that the processes of UV-LED/chlorine and chlorination degradation followed the pseudo-first-order kinetic model. In this study, the impact of chloride, nitrate, bicarbonate, carbonate, sulfate, and sulfite anions on the performance of the process was investigated. It indicated that sulfite anion has the most negative impact on the RB19 removal process. By evaluating the synergistic effect between UV-LED lamp and chlorine, a synergy index of 5.0 was obtained for the UV-LED/chlorine process. The results presented that the UV-LED/chlorine process has a better performance than each of them alone and has the necessary efficiency for RB19 removal. Measuring COD reported its removal efficiency of 98% during the UV-LED/chlorine process under optimized conditions. Experiments continued with textile factory wastewater and indicated 30.9% of its COD removed after treatment when 1.0 μM chlorine was used.

UV/Chlorine process for dye degradation in aqueous solution: Mechanism, affecting factors and toxicity evaluation for textile wastewater

Reactive Blue 19 dye removal by UV-LED/chlorine advanced oxidation process

Chemical catalytic reaction and biological oxidation for treatment of non-biodegradable textile effluent

Ultraviolet radiation/persulfate/hydrogen peroxide treatment system for the degradation of acid blue 80 dye from a batch flow chemical reactor: effects of operational parameters, mineralization, energy consumption, and kinetic studies

The multiple role of inorganic and organic additives in the degradation of reactive green 12 by UV/chlorine advanced oxidation process

Enhanced Decomposition of Reactive Blue 19 Dye in Ultrasound Assisted Electrochemical Reactor

Microalgal and activated sludge processing for biodegradation of textile dyes

Removal of COD and Color from Textile Wastewater by the Fenton and UV/H2O2 Oxidation Processes and Optimization

Electrochemical Oxidation of Synthetic Dyes in Simulated Wastewaters

Multivariate optimization of organic matter and color removal from textile dyeing industry wastewater by ultraviolet-activated oxidants

Efficient electrochemical advanced degradation of Red CL and Red WB dyes from the tanning industry using a boron-doped diamond anode

Degradation of Textile Dyes Employing Advanced Oxidative Processes: Kinetic, Equilibrium Modeling, and Toxicity Study of Seeds and Bacteria

Accelerated mineralization of textile wastewater under 222 nm irradiation from Kr/Cl2 excilamp: an environmentally friendly and energy efficient approach

A Performance Comparison of Anaerobic and an Integrated Anaerobic-Aerobic Biological Reactor System for the Effective Treatment of Textile Wastewater

Decolorization of dyestuffs by some species of green algae and cyanobacteria and its consortium

Investigation and optimization of the performance of sono-photo-electro-Fenton process for removal of Acid Black 172 and Disperse Blue 56 from polluted water: comparison of the degradation activity with electro-Fenton-based processes

Sequencing batch reactor/nanofiltration hybrid method for water recovery from textile wastewater contained phthalocyanine dye and anionic surfactant

Oxidative Treatment Characteristics Of Biotreated Textile-Dyeing Wastewater And Chemical Agents Used In A Textile-Dyeing Process By Advanced Oxidation Process

ADDITIONAL PURIFICATION BY ULTRAVIOLET RADIATION OF RED SPD DYE AFTER ELECTROCHEMICAL DESTRUCTION

Degradation of C.I. Disperse Blue 56 by Ultraviolet Radiation/Sodium Hypochlorite

Degradation of Reactive Red (B-3BF) Dye Wastewater Using UV Irradiation (254/185nm) with Sodium Persulfate in a Pilot UV Device