Study on the Strength Characteristics of Frozen Soil in Artificial Freezing Sinking

Wang Da-yan
Abstract:With the developing of civil engineering in permafrost regions, frozen soil mechanics have been made great progress in solving general problems in foundation engineering. However, the availability of these theories is still inappropriate to solve the problems in the artificial freezing shaft, because the forming process of artificial frozen soils is different from that of natural frozen soils. The natural frozen soil is formed under frigid climate without pressure, while the artificial frozen soil is formed by artificial refrigerating method with higher loading. In order to simulate the actual freezing and loading process of frozen soil in artificial freezing shaft, experiments on loess were carried out under an artificial controlling condition in laboratory. First, a series of standard soil samples were taken into a pressure chamber to conduct the \%K\%\-0 consolidation test, then let the temperature drop down to a certain degree, and hold it for 20 h, at last, kept the axial pressure constant and unloaded the confining pressure. The following conclusions can be drawn. The subfreezing temperature and soil depth are the main factors which strongly affect the failure strength and the failure strain of the frozen soil in artificial freezing shaft. The failure strength and the failure strain increase monotonically with the increasing initial confining pressure. Their relations can be described by formulas: \%(σ\-1-σ\-3)\%\-f=\%k\-1σ\-3+c\-1\% and \%e\%\-\{1f\}=\%k\-2σ\-3+c\-2\%, where \%k 1 ?c 1 ? k 2 \%and\% c\% 2 are empirical parameters. The relationship between failure strength and temperature is determined by initial confining pressure. The failure strength is not responsible to the subfreezing temperature at the lower initial confining pressure, but it obviously responds to the subfreezing temperature when it becomes higher. Failure strain depends on temperature fluctuation at any confining pressure. The failure strain in the test decreases with temperature decreasing and presents hyperbola-shaped tendency. At different initial confining pressure, the influence of temperature fluctuation on failure strain is less at the temperature below-7 ℃,and the quadratic equation \%(e\-\{1f\}=Aθ\+2+Bθ+C\% ) can be used to describe the relationship between failure strain and temperatures fluctuation, where θ is temperature in ℃, \%A, B\%and \%C\%depend upon initial confining pressure.
Materials Science,Engineering,Environmental Science
What problem does this paper attempt to address?