Abstract:When approaching the subwavelength or deep subwavelength scale, there is a fundamental trade-off between the ultimate shrinking size and the performance for miniaturized lasers. Herein, to overcome this trade-off, we investigated the excitonic gain nature of quasi-two-dimensional (quasi-2D) perovskites and revealed that both singlet excitons and polarons would make nearly the entire contribution within ∼50 ps to a high net gain of 558 cm<sup>–1</sup>. Inspired by the gain characteristic, we successfully shrank the quasi-2D perovskites laser to the subwavelength scale using only a layer of ultraviolet glue and a glass substrate in the vertical dimension. In spite of the compact and simple cavity structure, single-mode lasing with a highly linear polarization degree of 81% and a quality factor of 1635 was achieved. The extremely short cavity, excellent lasing performance, and simple structure of the quasi-2D perovskite laser are expected to provide insights into next-generation integrated laser sources.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c10647?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c10647</a>.Schematic diagram of the preparation of the quasi-2D perovskite thin film (top) and vertical cavity with UV glue (bottom); the optical images and AFM images; XRD pattern of the quasi-2D perovskite; the kinetics of bleaching signals in transient absorption spectra of <a class="internalNav" href="#fig2">Figure </a><a class="internalNav" href="#fig2">2</a>a; temperature-dependent steady-state PL properties of the quasi-2D perovskite; the optical gain measurement; the pump fluence-dependent emission spectra and lasing peak of the quasi-2D perovskite laser; lifetime of the quasi-2D perovskite lasing at a pump density of 1.15 times the threshold under 800 nm excitation; the single-mode lasing from the vertical cavity under one-photon excitation; the polarization characteristics of the perovskite emission; the long-term lasing integrated intensity under an 800 nm fs laser pump; the 3D perovskite vertical cavity based on DBRs (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c10647/suppl_file/nn0c10647_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The paper aims to address the following issues: 1. **Breaking the Trade-off Between Size and Performance**: At sub-wavelength or deep sub-wavelength scales, there is a fundamental trade-off between the size of micro-lasers and their performance. This paper attempts to overcome this limitation by studying quasi-2D perovskite materials. 2. **Understanding the Impact of Exciton Characteristics on Laser Performance**: For quasi-2D perovskite materials, how their exciton characteristics (especially singlet and triplet excitons) affect laser performance is not yet fully understood. This paper reveals the mechanisms of these excitons in the laser process through experiments. Specifically, the research team discovered through experiments that under femtosecond pulse excitation, quasi-2D perovskite materials exhibit phenomena such as polaron recombination, Förster energy transfer, and singlet exciton recombination, contributing to a long optical gain of up to 51.5 picoseconds with a significant optical gain (558 cm⁻¹). Additionally, they constructed a deep sub-wavelength cavity using UV glue and a glass substrate, achieving single-mode linearly polarized laser emission at room temperature with a threshold as low as approximately 143 μJ/cm² and a quality factor as high as 1635. These results indicate that this simple-structured deep sub-wavelength quasi-2D perovskite laser provides an effective strategy for realizing electrically driven perovskite lasers and holds promise for integration into future nanophotonic applications.

Subwavelength-Polarized Quasi-Two-Dimensional Perovskite Single-Mode Nanolaser

Low‐Threshold, External‐Cavity‐Free Flexible Perovskite Lasers

Quasi 2D Perovskite Single-Mode Vertical-Cavity Lasers Through Large-Area Film Transfer

Subwavelength-scale Lasing Perovskite with Ultrahigh Purcell Enhancement

Robust Subwavelength Single-Mode Perovskite Nanocuboid Laser

Perovskite Quantum Dot Lasing in a Gap-Plasmon Nanocavity with Ultralow Threshold

Single-mode lasers based on pseudo-cubic perovskite CsPbBr 3 microcrystals

High Q-Factor and Low Threshold Continuous-Wave Near-Infrared Lasing with Quasi-2D Perovskites

Room‐Temperature Single‐Mode Plasmonic Perovskite Nanolasers with Sub‐Picosecond Pulses

Optically Pumped Lasing of Segregated Quasi-2D Perovskite Microcrystals in Vertical Microcavity at Room Temperature

Advances in Small Perovskite‐Based Lasers

Superior Single-Mode Lasing in a Self-Assembly CsPbX3 Microcavity over an Ultrawide Pumping Wavelength Range

Highly Controllable Etchless Perovskite Microlasers Based on Bound States in the Continuum

Role of the Exciton–Polariton in a Continuous-Wave Optically Pumped CsPbBr 3 Perovskite Laser

High Q-Factor Single-Mode Lasing in Inorganic Perovskite Microcavities with Microfocusing Field Confinement.

High‐Quality Single‐Mode Lasers Based on Zero‐Dimensional Cesium Lead Halide Perovskites

Enhanced Single-Mode Lasers of All-Inorganic Perovskite Nanocube by Localized Surface Plasmonic Effect from Au Nanoparticles

Two-photon-pumped High-Quality, Single-Mode Vertical Cavity Lasing Based on Perovskite Monocrystalline Films

Lasing from Laminated Quasi‐2D/3D Perovskite Planar Heterostructures

Water‐resistant Subwavelength Perovskite Lasing from Transparent Silica‐Based Nanocavity

Polariton lasing in Mie-resonant perovskite nanocavity