Abstract:A multifunctional molecular bridging layer using 2,5‐dichloroterephthalic acid as a pre‐buried additive on the tin oxide (SnO2) electron transport layer enables interfacial energy level alignment and defect passivation. As a result of the method, the high power conversion efficiencies of 23.25% and 20.23% for the active area of 0.15 cm2 device and 17.52 cm2 mini‐module are achieved, respectively. Tin oxide (SnO2) is currently the dominating electron transport material (ETL) used in state‐of‐the‐art perovskite solar cells (PSCs). However, there are amounts of defects distributed at the interface between ETL and perovskite to deteriorate PSC performance. Herein, a molecule bridging layer is built by incorporating 2,5‐dichloroterephthalic acid (DCTPA) into the interface between the SnO2 and perovskites to achieve better energy level alignment and superior interfacial contact. The multifunctional molecular bridging layer not only can passivate the trap states of Sn dangling bonds and oxygen vacancies resulting in improved conductivity and the electron extraction of SnO2 but also can regulate the perovskite crystal growth and reduce defect‐assisted nonradiative recombination due to its strong interaction with undercoordinated lead ions. As a result, the DCTPA‐modified PSCs achieve champion power conversion efficiencies (PCEs) of 23.25% and 20.23% for an active area of 0.15 cm2 device and 17.52 cm2 mini‐module, respectively. Moreover, the perovskite films and PSCs based on DCTPA modification show excellent long‐term stability. The unencapsulated target device can maintain over 90% of the initial PCE after 1000 h under ambient air. This strategy guides design methods of molecule bridging layer at the interface between SnO2 and perovskite to improve the performance of PSCs .

Enhancing Efficiency and Stability of Tin‐Based Perovskite Solar Cells through the Addition of Nickel (II) Porphyrin Complex for Defect Passivation and Mitigation of Ion Migration

Suppressing Oxidation at Perovskite‐NiOx Interface for Efficient and Stable Tin Perovskite Solar Cells

Synergistic Effects of the Physical Modification and Chemical Passivation Enabling Efficient Perovskite Solar Cells

Over 14% efficiency of highly reproducible Sn perovskite solar cell via defect passivation and morphology repairment

Effective passivation of defects in high-performance tin oxide-based perovskite solar cells using guanidinium phosphate additives

Efficiency enhancement of perovskite solar cells based on Al2O3-passivated nano-nickel oxide film

Interfacial Energy Level Alignment and Defect Passivation by Using a Multifunctional Molecular for Efficient and Stable Perovskite Solar Cells

Dual‐Stage Reduction Strategy of Tin Perovskite Enables High Performance Photovoltaics

Linked Nickel Oxide/Perovskite Interface Passivation for High‐Performance Textured Monolithic Tandem Solar Cells

Dual Effects of Slow Recrystallization and Defects Passivation Achieve Efficient Tin‐Based Perovskite Solar Cells with Good Stability Up to One Year

Overcome Low Intrinsic Conductivity of NiOx through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

Solution Processed Ternary Tin (II) Alloy as Hole‐Transport Layer of Sn‐Pb Perovskite Solar Cells for Enhanced Efficiency and Stability

Revealing Defect Passivation and Charge Extraction by Ultrafast Spectroscopy in Perovskite Solar Cells through a Multifunctional Lewis Base Additive Approach

Stability Improvement of Tin‐Based Halide Perovskite by Precursor‐Solution Regulation with Dual‐Functional Reagents

Triple hole transporting and passivation layers for efficient NiOX-based wide-bandgap perovskite solar cells

Efficient tin-based perovskite solar cells with trans- isomeric fulleropyrrolidine additives

Defect Compensation and Lattice Stabilization Enables High Voltage Output in Tin Halide Perovskite Solar Cells

Nitrogen‐doped tin oxide electron transport layer for stable perovskite solar cells with efficiency over 23%

Reduced VOC Deficit of Mixed Lead–Tin Perovskite Solar Cells via Strain‐Releasing and Synergistic Passivation Additives

Functionalized Thienopyrazines on NiOx Film as Self-Assembled Monolayer for Efficient Tin-Perovskite Solar Cells Using a Two-Step Method

Dual Defect‐Passivation Using Phthalocyanine for Enhanced Efficiency and Stability of Perovskite Solar Cells