Abstract:In the design study of large-sized sodium-cooled fast reactors in Japan (JSFR), the suppression of gas entrainment (GE) phenomena at a free surface in the reactor vessel is very important to establish an economically superior design. However, the GE phenomena are highly non-linear and too difficult to be evaluated theoretically. Therefore, we are developing high-precision CFD method for gas-liquid two-phase flows to evaluate the GE phenomena accurately. To reproduce the GE phenomena by CFDs, there are three key issues, i.e. geometry dependency, interfacial dynamics and locality. Former two issues are already addressed by employing unstructured mesh schemes and a high-precision simulation method for gas-liquid two-phase flow based on the PLIC (Piecewise Linear Interface Calculation) method, respectively. In fact, the simulation results of the GE phenomena in a simple GE experiment showed good agreements with experimental data. Recently, therefore, we focus on the locality of the GE phenomena. In our previous study (presented in ICONE17), the two-dimensional unstructured adaptive mesh technique for single-phase flows was developed to address the third issue. The isotropic cell refinement method was employed and the connection cell method was proposed to eliminate the edge incompatibility. The verification/validation results showed that the developed unstructured adaptive mesh technique succeeded in providing a high-precision solution, even though a poor-quality distorted mesh at the initial state was employed. In this study, the unstructured adaptive mesh technique is extended to the numerical simulations of gas-liquid two-phase flows. The redistribution methods of two-phase flow variables are newly developed to satisfy the conservations of the variables, i.e. the volumes of gas and liquid phases, the location of interfaces and the momentum of each phase. This improved unstructured adaptive mesh technique for gas-liquid two-phase flows is validated by solving the well-known slotted disk revolution and dam-break problems. As a result, the unstructured adaptive mesh technique succeeds in maintaining the slotted-disk shape after one revolution and shows more than first order accuracy (grid convergence) in the slotted-disk revolution problem. In addition, thanks to the momentum-conservative formulation, the dam-break phenomenon is well simulated by the unstructured adaptive mesh technique. Especially, wave-breaking phenomena are simulated by refined cells near the gasliquid interface. It should be noted that these simulation results are obtained by using relatively small number of cells because of the efficient mesh adaptation by the unstructured adaptive mesh technique.

High-Resolution Boundary Variation Diminishing Scheme for Two-Phase Compressible Flow with Cavitation and Evaporation

A low-dissipation numerical method based on boundary variation diminishing principle for compressible gas-liquid two-phase flows with phase change on unstructured grid

Implementation of BVD (boundary variation diminishing) algorithm in simulations of compressible multiphase flows

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

Discontinuity-resolving shock-capturing schemes on unstructured grids

An efficient and robust all-Mach consistent numerical scheme for simulation of compressible multi-component fluids including surface tension, cavitation, turbulence modeling and interface sharpening on compact stencils

An all-Mach consistent numerical scheme for simulation of compressible multi-component fluids including surface tension, cavitation, turbulence modeling and interface sharpening on compact stencils

A high-order diffuse-interface method with TENO-THINC scheme for compressible multiphase flows

Unstructured Adaptive Mesh Technique for Gas-Liquid Two-Phase Flows

A family of TENOA-THINC-MOOD schemes based on diffuse-interface method for compressible multiphase flows

Accuracy and Stability Enhancements in the Incompressible Finite-Volume-particle Method for Multiphase Flow Simulations.

A high-fidelity finite volume scheme for ideal magnetohydrodynamics equations using boundary variation diminishing algorithm

A High‐precision Unstructured Adaptive Mesh Technique for Gas–liquid Two‐phase Flows

A Hybrid Scheme of Level Set and Diffuse Interface Methods for Simulating Multi-Phase Compressible Flows

Examination of Appropriate Formulations for Velocity and Pressure Calculation Methods at Interfacial Region on Collocated Physical Variables' Distribution

High-order hybrid DG-FV framework for compressible multi-fluid problems on unstructured meshes

A conservative sharp interface method for incompressible viscous two-phase flows with topology changes and large density ratio

Consistent High Resolution Interface-Capturing Finite Volume Method for Compressible Multi-Material Flows

A fifth-order low-dissipation discontinuity-resolving TENO scheme for compressible flow simulation

Highly efficient and unconditionally energy stable semi-discrete time-marching numerical scheme for the two-phase incompressible flow phase-field system with variable-density and viscosity

A consistent diffuse-interface model for two-phase flow problems with rapid evaporation