Virtual trial assembly of steel structure based on BIM platform

Yin-Gang Wang,Xiong-Jun He,Jia He,Cheng Fan
DOI: https://doi.org/10.1016/j.autcon.2022.104395
IF: 10.3
2022-09-01
Automation in Construction
Abstract:Using virtual trial assembly (VTA) instead of physical trial assembly for complex steel structures can significantly reduce manufacturing costs and time. At present, owing to the lack of specialised VTA systems for steel structures, VTA is usually implemented through a third-party quality inspection system or a manual program, which faces difficulties regarding applicability to complex steel structures and transmission of assembly information. With regard to the application of BIM in the manufacturing stage, this study proposed an innovative framework that implements the VTA of a complex steel structure on a building information modelling (BIM) platform. This study elaborates on the technical details of each step in a complete VTA process, starting with a BIM model. In this study, Revit was used as the research platform, and a VTA program prototype based on the Procrustes Analysis algorithm was developed using the built-in Dynamo visual programming plugin. This prototype achieved two basic functions: geometric inspection and assembly testing. Finally, the VTA of the steel truss girder of a suspension bridge with a main span of 1000 m was considered as a real case to verify the proposed method.
construction & building technology,engineering, civil
What problem does this paper attempt to address?
This paper aims to solve the problems of high cost and long time in the trial - assembly process during the manufacturing of complex steel structures. Specifically, the paper proposes a virtual trial - assembly (VTA) framework based on the Building Information Modeling (BIM) platform to replace the traditional physical trial - assembly method. This framework aims to significantly reduce manufacturing costs and time by checking the geometric quality of components and verifying their assembly feasibility through trial - assembly simulations in a virtual environment. ### Background and Problems In steel structure manufacturing, in order to ensure the smooth progress of on - site installation, a trial - assembly is usually required in the factory to pre - identify and eliminate problems that may occur during the final on - site installation and erection process. However, the cost and time of this physical trial - assembly are very high because it involves factors such as manpower, machinery, a suitable construction site, and transporting components to the pre - assembly location. ### Solutions To solve the above problems, the paper proposes a virtual trial - assembly framework based on the BIM platform. Using the BIM model as a basis, this framework realizes two basic functions, geometric inspection and assembly testing, by developing a VTA program prototype based on the Dynamo plug - in. The specific steps are as follows: 1. **BIM Model Creation**: Create a detailed steel structure BIM model in Revit. 2. **Measurement Point Selection and Marking**: Select and mark the assembly points (usually the centers of bolt holes) that need to be measured from the BIM model and number them. 3. **Actual Coordinate Measurement**: Use high - precision measuring instruments (such as total stations) in the factory to measure the actual 3D coordinates of these points. 4. **Data Comparison and Analysis**: Input the theoretical coordinates and actual coordinates into the VTA program for comparison and output the geometric and assembly deviations. 5. **Result Processing**: If the deviation is within the allowable range, the component is considered qualified and can be shipped out of the factory; otherwise, the unqualified bolt holes need to be processed, re - measured, and compared until the requirements are met. ### Technical Details - **Coordinate Alignment Algorithm**: The paper adopts the Extended Orthogonal Procrustes Analysis (EOPA) and Generalized Procrustes Analysis (GPA) algorithms to achieve coordinate alignment and deviation calculation. - **EOPA Algorithm**: Used for least - squares calculation of the position deviation between the measured coordinates and the theoretical coordinates. - **GPA Algorithm**: Used for simultaneously and independently estimating the similarity transformation parameters between multiple coordinate matrices to maximize the correspondence. ### Experimental Verification The paper verifies the effectiveness of the proposed VTA framework through a practical case - the virtual trial - assembly of a steel truss girder of a suspension bridge with a main span of 1,000 meters. The experimental results show that this framework can accurately detect geometric quality and verify assembly feasibility, significantly reducing manufacturing costs and time. ### Conclusion This research proposes a virtual trial - assembly framework based on the BIM platform, which solves the high - cost and long - time problems of traditional physical trial - assembly and provides a new solution for the manufacturing of complex steel structures. By integrating BIM technology and the VTA method, the efficiency of the information flow is improved and the application of BIM in the manufacturing stage is expanded.