Abstract:Pseudocapacitance holds great promise for energy density improvement of supercapacitors, but electrode materials show practical capacity far below theoretical values due to limited ion diffusion accessibility and/or low electron transferability. Herein, inducing two kinds of straight ion-movement channels and fast charge storage/delivery for enhanced reaction kinetics is proposed. Very thick electrodes consisting of vertically aligned and ordered arrays of NiCo2S4-nanoflake-covered slender nickel columns (NCs) are achieved via a scalable route. The vertical standing ∼5 nm ultrathin NiCo2S4 flakes build a porous covering with straight ion channels without the "dead volume", leading to thickness-independent capacity. Benefiting from the architecture acting as a "superhighway" for ultrafast ion/electron transport and providing a large surface area, high electrical conductivity, and abundant availability of electrochemical active sites, the NiCo2S4@NC-array electrode achieves a specific capacity up to 486.9 mAh g–1. The electrode even can work with a high specific capacity of 150 mAh g–1 at a very high current density of 100 A g–1. In particular, due to the advanced structure features, the electrode exhibits excellent flexibility with a unexpected improvement of capacity when being largely bent and excellent cycling stability with an obvious resistance decrease after the cycles. An asymmetric pseudocapacitor applying the NiCo2S4@NC-array as a positive electrode achieves an energy density of 66.5 Wh kg–1 at a power density of 400 W kg–1, superior to the most reported values for asymmetric devices with NiCo2S4 electrodes. This work provides a scalable approach with mold-replication-like simplicity toward achieving thickness-independent electrodes with ultrafast ion/electron transport for energy storage.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c02973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c02973</a>.Illustration of synthesis process of a nickel template; XRD patterns of the typical NiCo2S4@NC-array and the bare NC-array; physicochemical characterization results of the NiCo2S4@NC-array electrode including the XPS spectra and SEM images; SEM images of FeCo2S4 nanowires at NC-array; CV and GCD curves of the NiCo2S4@NC-array electrodes obtained with different tR; low-magnification SEM-EDS elemental mappings and XPS analysis of the NiCo2S4@NC-array electrode after 2000 cycles; SEM image of a porous pressed on a Ni foam and CV curves of the positive and negative electrodes recorded at 20 mV s–1; table presenting the electrochemical performance comparison with other reported values (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c02973/suppl_file/nn0c02973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High strain-rate driven nano-tubular architecture in NiMn alloy for supercapacitor electrodes

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Single-step, in-situ fabrication of flower-like NiCuMn hybrid oxyhydroxide electrodes for enhanced supercapacitor performance

Design and fabrication of novel MnCr2O4 nanostructure: electrochemically deposited on stainless steel strip with enhanced efficiency towards supercapacitor applications

One dimensional MnO 2/titanium nitride nanotube coaxial arrays for high performance electrochemical capacitive energy storage

Dealloyed nickel skeleton hosting in-situ formed multimetallic phosphides for enhanced electrochemical energy storage

Achieving Rich Mixed-Valence Polysulfide/Carbon Nanotube Films Toward Ultrahigh Volume Energy Density and Largely Deformable Pseudocapacitors.

Development of Vertically Aligned Trimetallic Mg-Ni-Co Oxide Grass-Like Nanostructure for High-Performance Energy Storage Applications

High Voltage Asymmetric Supercapacitors Using Tungsten‐Doped Mn‐Co Spinel Ferrite Electrodes

Rational design of crystalline/amorphous nickel manganese phosphate octahydrate heterostructure for high-performance aqueous and all-solid-state asymmetric supercapacitors

Electrical and structural engineering of nanoflower-like NiMn-layered double hydroxide by V modulation for high-performance hybrid supercapacitors

Nanocrystalline C-Ni Hybrid Nanoporous Monoliths for Large-Capacity and Ultrahigh-Rate Energy Storage

High-efficiency activated phosphorus-doped Ni2S3/Co3S4/ZnS nanowire/nanosheet arrays for energy storage of supercapacitors

Vertically Aligned and Ordered Arrays of 2D MCo 2 S 4 @Metal with Ultrafast Ion/Electron Transport for Thickness-Independent Pseudocapacitive Energy Storage

Operando Tailoring of Defects and Strains in Corrugated β‐Ni(OH) 2 Nanosheets for Stable and High‐Rate Energy Storage

Electrochemically Finely Regulated NiCo‐LDH/NiCoOOH Nanostructured Films for Supercapacitors with Record High Mass Loading, Areal Capacity, and Energy Density

Mn3O4 Tetragonal Bipyramid Laden Nitrogen Doped and Hierarchically Porous Carbon Composite As Positive Electrode for High-Performance Asymmetric Supercapacitor

High Magnetic Field-Engineered High Mass Loading Sulfides with Well-Ordered Hierarchical Nanostructures for All-Solid-state Supercapacitors

Synchronous Defect and Interface Engineering of NiMoO4 Nanowire Arrays for High-Performance Supercapacitors

Designing of NiMn-MOF@MXene nanorods@AC@NF electrode material for high performance electrochemical based energy storage devices

Recent progress in nanostructured transition metal nitrides for advanced electrochemical energy storage