Abstract:The notorious growth of Li dendrites significantly shortens the longevity and raises safety concerns of high-energy-density Li metal batteries. We proposed a sulfurized solid electrolyte interphase (SEI) to protect Li metal anode in a working Li metal battery. By incorporating Li2S into the interphase, a polycrystalline and mosaic SEI film with poor crystallinity was achieved. Li2S, Li2O, Li3N, LiNO3, and LiF nanoparticles were embedded in the sulfurized SEI. A high ionic conductivity of 3.1×10−7Scm−1 was achieved for the sulfurized SEI, around one magnitude higher than that of the routine SEI (4.2×10−8Scm−1). Therefore, uniform plating/stripping of the Li metal was achieved without Li dendrite formation. The sulfurized SEI enabled stable cycling of Li | Li cells for 500h at 1.0mAcm−2 and for 150h at 5.0mAcm−2. With the protection of a sulfurized SEI film, Li metal anode exhibited a high Coulombic efficiency of 98% during 200 cycles at 1.0mAcm−2, while the Coulombic efficiency drastically dropped to 70% at the 200th cycle on Li metal anode with routine SEI. The pouch cells exhibited a plating resistance of −331 and −108mV, a stripping resistance of 67 and 54mV on Li metal anode with routine and sulfurized SEI films, respectively. The sharply decreased resistance, endowed by the sulfurized SEI, futher suggested the rapid Li ion diffusion in working Li-metal batteries. This affords new insights into the SEI structure and its critical role in Li metal protection, and sheds a fresh light on the rational design of electrolyte additives and SEI film in a working Li metal battery.

Cyclosulfate additive constructs stable interface to limit dendrites and realize stable cycle of LMBs

Cyclosulfate additive inhibits Li dendrite disorder growth to achieve stable cycles of Li metal battery

A polythiourea protective layer for stable lithium metal anodes

Sulfurized Solid Electrolyte Interphases with a Rapid Li+ Diffusion on Dendrite-Free Li Metal Anodes

A Mixed Lithium-Ion Conductive Li<sub>2</sub>S/Li<sub>2</sub>Se Protection Layer for Stable Lithium Metal Anode

A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode

Stabilization of the Li Metal Anode Through Constructing a LiZn Alloy/polymer Hybrid Protective Layer Towards Uniform Li Deposition

An "Electronegative" Bifunctional Coating Layer: Simultaneous Regulation Of Polysulfide And Li-Ion Adsorption Sites For Long-Cycling And "Dendrite-Free" Li-S Batteries

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Electrolyte Additive Maintains High Performance for Dendrite-Free Lithium Metal Anode

Uniform High Ionic Conducting Lithium Sulfide Protection Layer for Stable Lithium Metal Anode

Organosulfide-plasticized Solid-Electrolyte Interphase Layer Enables Stable Lithium Metal Anodes for Long-Cycle Lithium-Sulfur Batteries.

Construction of lithium sulfide layer on lithium metal by a facile strategy for improving the cyclic stability of lithium metal batteries

Bi-containing Electrolyte Enables Robust and Li Ion Conductive Solid Electrolyte Interphase for Advanced Lithium Metal Anodes

Constructing a conductive solid electrolyte interface by adding lithium nitrate into carbonate electrolyte for stable lithium metal anode

Lithium Phosphorus Oxynitride As an Efficient Protective Layer on Lithium Metal Anodes for Advanced Lithium-Sulfur Batteries

SiO2 Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

Additives strategies to improving cycling stability of Li metal batteries by modifying electrode electrolyte interphases

Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

SiO<sub>2</sub> Hollow Nanosphere-Based Composite Solid Electrolyte for Lithium Metal Batteries to Suppress Lithium Dendrite Growth and Enhance Cycle Life

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries