Abstract:Abstract CO2-foam enhanced oil recovery (EOR) has been considered a proven technology to mitigate adverse effects from CO2 front instabilities in highly heterogeneous reservoirs, such as viscous fingering, gravity segregation, and superior flow in high permeability streaks, leading to premature CO2 breakthrough. A highly stable CO2-foam is required to provide significant mobility control effect that stimulates flow diversion from high-permeability to low-permeability regions, hence improved sweep efficiency. CO2-foam EOR process can also be advanced for effective CO2 utilization and long-term CO2 sequestration in addition to improved oil production. However, harsh in-situ environments of hydrocarbon reservoirs greatly determine the performance of CO2-foam and the efficiency of the entire operations, leading to a need of foam formulation optimization in addition to technical development. As an innovative solution, hydrophobically modified polymer was employed to improve overall CO2-foam properties and CO2 mobility control performance inside porous media. A comprehensive evaluation on foaming properties (foamability and foam stability) and foam rheological behavior was performed under supercritical conditions to warrant the suitability of developed formulation as high-performance foaming agent. CO2-foam was generated using the primary foaming agent (alpha olefin sulfonate and betaine) in combination with different types of hydrophobically modified polymers, referred as to HMP, and conventional polymers (HPAMs) as foam stabilizers. The steady-state foam resistance established by each foam during dynamic flow tests was assessed under reservoir conditions to indicate the extent of mobility control effect for better sweep efficiency and the capability of the developed CO2-foam formulation of suppressing CO2 migration, hence improved storage efficiency. The formulation containing the selected HMP offered an acceptable foam generation ability compared to the formulations containing classical HPAM polymers. The presence of HMP with a higher degree of hydrophobes and lower molecular weight in surfactant-stabilized foam system was able to produce an improved flow resistance. These are attributed to the formation of organized and bridged polymer network triggered by hydrophobic association in the bulk and lamella interface hence providing steric forces at the interface that leads to substantial elasticity. Results from dynamic flow experiments revealed the superior performance of HMP stabilized CO2-foam in porous media in which its flow resistance was found to be 70% and 95% higher than that of polymer-free CO2-foam, and individual CO2, respectively. This research provides an alternative solution by promoting a relatively new foam formulation which is stabilized by hydrophobically modified water-soluble polymer. Besides offering better mobility control effect during EOR process, the application of developed CO2-foam formulation was also extended to CO2 trapping improvement for better CO2 sequestration by suppressing unfavorable CO2 mobility through high-permeability pathways. Therefore, the designed foam should be able to control CO2 plumes migration, enhance CO2 storage potential, and improve CO2 utilization for complex reservoirs.

Investigation on enhanced oil recovery and CO2 storage efficiency of temperature-resistant CO2 foam flooding

Experimental investigation of CO 2 foam flooding-enhanced oil recovery in fractured low-permeability reservoirs: Core-scale to pore-scale

Experimental investigation of CO2 foam flooding-enhanced oil recovery in fractured low-permeability reservoirs: Core-scale to pore-scale

Optimization of Steamflooding Heavy Oil Reservoirs

CO2 in water foam stabilized with CO2-dissolved surfactant at high pressure and high temperature

Mechanism of Enhanced Oil Recovery of Ultra-Dry CO2-in-water Foams in Porous Media: Experiments and Numerical Simulation

Mechanism of enhanced oil recovery of ultra-dry CO 2 -in-water foams in porous media: Experiments and numerical simulation

Comparative Investigation of the Static and Dynamic Properties of CO2 Foam and N2 Foam

Improved CO2-Foam Properties and Flow Behavior by Hydrophobically Modified Polymers: Implications for Enhanced CO2 Storage and Oil Recovery

CO 2 foam to enhance geological storage capacity in hydrocarbon reservoirs

CO2 Foam and CO2 Polymer Enhanced Foam for Heavy Oil Recovery and CO2 Storage

A numerical feasibility study of CO2 foam for carbon utilization and storage in a depleted, high salinity, carbonate oil reservoir

CO2 Geostorage and Enhanced Oil Recovery: Challenges in Controlling Foam/Emulsion Generation and Propagation

Unsteady-state CO2 foam injection for increasing enhanced oil recovery and carbon storage potential

Mechanism of Plugging High Permeability Core and Decreasing Reservoir Heterogeneity with Ultra-Dry CO2-in-water Foam

Study of the Enhanced Oil Recovery Mechanism and Remaining Oil State of Heavy Oil after Viscosity-Reducer-Assisted CO 2 Foam Flooding: 2D Microvisualization Experimental Case

Research on EOR for ultralow interfacial tension foam in high-temperature and high-salinity reservoirs: flooding simulation and application in Shengli Oilfield

Analysis and Experimental Study on Air Foam Flooding Seepage Flow Mechanics

Investigation of Polymer-Assisted CO2 Flooding to Enhance Oil Recovery in Low-Permeability Reservoirs

Investigation of Chemical-Foam Design as a Novel Approach toward Immiscible Foam Flooding for Enhanced Oil Recovery

Novel CO2/N2 Foam Concept and Optimization Scheme for Improving CO2-foam EOR Process