Effects of Heterogeneous Sulfated Acid Photocatalysts and Irradiation of Ultraviolet Light on the Chemical Conversion and Characteristics of Antifreeze from Bioglycerol

Cherng-Yuan Lin,Yun-Chih Chen
DOI: https://doi.org/10.3390/pr12020383
IF: 3.5
2024-02-15
Processes
Abstract:The purity of crude glycerol, a by-product of biodiesel production, may be as low as 50%. Thus, it has relatively low economic value without previously applying adequate physical purification or chemical conversion processes. A solid-state sulfated acid photocatalyst, TiO2/SO42- was prepared in this study to catalyze the chemical conversion of bioglycerol with acetic acid to produce an antifreeze of glycerine acetate to improve the low-temperature fluidity of liquid fuel. The experimental results show that similar X-ray intensity structures appeared between the catalysts of TiO2/SO42- and SO42-. An infrared spectra analysis using a Fourier transform infrared (FTIR) spectrometer confirmed the successful sintering of SO42- and ligating with TiO2 for preparing TiO2/SO42-. The effects of the photocatalyst were further excited by the irradiation of ultraviolet light. The highest weight percentage of glycerine acetate was obtained under a reaction time and reaction temperature of 10 hours and 120°C, respectively. In addition, it was observed that the glycerol conversion ratio reached 98.65% and the triacylglycerols compound amounted to 40.41 wt.% when the reacting molar ratio was 8. Moreover, the freezing point of the product mixture of glycerine acetate under the same molar ratio reached as low as -46.36°C; the lowest among the products made using various molar ratios of acetic acid/glycerol. The UV light irradiation rendered higher triacylglycerols and diacylglycerols with lower diacylglycerol formation ratios than those without light irradiation.
engineering, chemical
What problem does this paper attempt to address?