Dual Inorganic Sacrificial Template Synthesis of Hierarchically Porous Carbon with Specific N Sites for Efficient Oxygen Reduction
Jiayu Hao,Yanqiu Wang,Xiaoqing Qiu,Min Liu,Wenzhang Li,Jie Li
DOI: https://doi.org/10.1021/acsami.1c04942
2021-06-11
Abstract:It is still a challenge to achieve efficiently controlled preparation of functional oxygen reduction reaction (ORR) carbon electrocatalysts with multi-preferred structures (hierarchically porous networks and specific carbon–nitrogen bonds) from carbohydrate-containing small molecules via simple one-step pyrolysis. Based on the step-by-step spontaneous gas-foaming strategy, we successfully prepare 3D hierarchically porous networks with tunable N sites (N<sub>P</sub>/N<sub>G</sub> ≈ 1:1) by pyrolyzing diverse carbohydrates (glucose, maltose, and cyclodextrin) using nonmetal–metal dual inorganic sacrificial templates. In situ evaporation templates can simplify the procedure of the experiments and avoid the active site loss compared with traditional hard templates. Crucially, dual inorganic sacrificial templates can induce abundant defects and microscopic pore structures (the specific surface area increased from 922.403 to 1898.792 m<sup>2</sup>·g<sup>–1</sup>) and tunable N sites compared with single nonmetal sacrificial templates. The regulatory mechanism of dual inorganic templates on N sites (N<sub>P</sub>/N<sub>G</sub> ≈ 1:1) is independent of the polymeric state of carbohydrate precursors or even the carbonization condition of the pyrolysis process. A series of carbon materials prepared by this strategy all have ORR-preferred structures and exhibit low ORR overpotentials compared with Pt/C. For instance, the Zn–air battery with βCD-DSC-950-1 exhibits an open-circuit potential of 1.51 V and a peak power density of 180.89 mW·cm<sup>–2</sup>, higher than those of Pt/C (1.47 V, 174.94 mW·cm<sup>–2</sup>). In general, the conversion of carbohydrate-containing small molecules to functional carbon materials provides a new strategy for the development of carbonaceous electrocatalysts.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04942?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04942</a>.Decomposition behaviors of βCD-SSC-950-1 and βCD-DSC-950-1 explored by TG analysis; BET-specific surface area, pore size distribution, and pore volume of βCD-SSC-950-1, βCD-Zn-950-1, βCD-DSC-950-1, and Glu-DSC-950-1 explored by surface area analyzer; elemental composition and chemical state of Glu-DSC-950-1, Mal-DSC-950-1, αCD-DSC-950-1, γCD-DSC-950-1, βCD-SSC-950-1, βCD-DSC-850-1, βCD-DSC-900-1, βCD-DSC-900-2, βCD-DSC-950-1, and βCD-DSC-950-2 explored by XPS; SEM images of βCD-SSC-950-1, βCD-DSC-950-1, βCD-Zn-950-1, βCD-DSC-850-1, and βCD-DSC-950-2; HRTEM and SAED images of βCD-SSC-950-1 gave evidence of the graphitic structure; zinc contents of Glu-DSC-950-1, Mal-DSC-950-1, αCD-DSC-950-1, γCD-DSC-950-1, βCD-DSC-850-1, βCD-DSC-900-1, βCD-DSC-900-2, βCD-DSC-950-1, and βCD-DSC-950-2 quantified by ICP-OES; and LSV curves at 400, 625, 900, 1225, and 1600 rpm and the corresponding electron-transfer number (<i>n</i>) of all samples (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04942/suppl_file/am1c04942_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology