Abstract:The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ∼525 MW of fusion power generated in a compact, high field (B0 = 9.2 T) tokamak that is approximately the size of JET (R0 = 3.3 m). Taking advantage of ARC’s novel design – demountable high temperature superconductor toroidal field (TF) magnets, poloidal magnetic field coils located inside the TF, and vacuum vessel (VV) immersed in molten salt FLiBe blanket – this follow-on study has identified innovative and potentially robust power exhaust management solutions. The superconducting poloidal field coil set has been reconfigured to produce double-null plasma equilibria with a long-leg X-point target divertor geometry. This design choice is motivated by recent modeling which indicates that such configurations enhance power handling and may attain a passively-stable detachment front that stays in the divertor leg over a wide power exhaust window. A modified VV accommodates the divertor legs while retaining the original core plasma volume and TF magnet size. The molten salt FLiBe blanket adequately shields all superconductors, functions as an efficient tritium breeder, and, with augmented forced flow loops, serves as an effective single-phase, low-pressure coolant for the divertor, VV, and breeding blanket. Advanced neutron transport calculations (MCNP) indicate a tritium breeding ratio of ∼1.08. The neutron damage rate (DPA/year) of the remote divertor targets is ∼3–30 times lower than that of the first wall. The entire VV (including divertor and first wall) can tolerate high damage rates since the demountable TF magnets allow the VV to be replaced every 1–2 years as a single unit, employing a vertical maintenance scheme. A tungsten swirl tube FLiBe coolant channel design, similar in geometry to that used by ITER, is considered for the divertor heat removal and shown capable of exhausting divertor heat flux levels of up to 12 MW/m2. Several novel, neutron tolerant diagnostics are explored for sensing power exhaust and for providing feedback control of divertor conditions over long time scales. These include measurement of Cherenkov radiation emitted in FLiBe to infer DT fusion reaction rate, measurement of divertor detachment front locations in the divertor legs with microwave interferometry, and monitoring “hotspots” on the divertor chamber walls via IR imaging through the FLiBe blanket.

Demonstration and evaluation of negative triangularity equilibria in the ARC fusion pilot plant concept

Prospects of negative triangularity tokamak for advanced steady-state confinement of fusion plasmas

Assessment of vertical stability for negative triangularity pilot plants

Experiments and modelling of negative triangularity ASDEX Upgrade plasmas in view of DTT scenarios

Characterizing the negative triangularity reactor core operating space with integrated modeling

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Nonlinear gyrokinetic modelling of high confinement negative triangularity plasmas

First-principle based predictions of the effects of negative triangularity on DTT scenarios

Simultaneous access to high normalized current, pressure, density, and confinement in strongly-shaped diverted negative triangularity plasmas

Achievement of highly radiating plasma in negative triangularity and effect of reactor-relevant seeded impurities on confinement and transport

Power handling in a highly-radiative negative triangularity pilot plant

Characterization of the ELM-free Negative Triangularity Edge on DIII-D

MANTA: A Negative-Triangularity NASEM-compliant fusion pilot plant

First Access to ELM-free Negative Triangularity at Low Aspect Ratio

Examining transport and integrated modeling predictive capabilities for negative-triangularity scenarios

Effect of triangularity on plasma turbulence and the SOL-width scaling in L-mode diverted tokamak configurations

An analytical model of how the negative triangularity cuts off the access to the second stable region in tokamak plasmas

Pedestal properties of negative triangularitydischarges in ASDEX Upgrade

Conceptual design study for heat exhaust management in the ARC fusion pilot plant

Physical insights from the aspect ratio dependence of turbulence in negative triangularity plasmas