Abstract:It is very difficult to selectively extract lithium ions from high Mg/Li salt lake brine efficiently and environmentally. Among the conventional extraction system, FeCl3 as the co-extractant has the disadvantages of easy to loss and reducing stability of the organic phase. Therefore, a new co-extractant must be developed and applied for selective extraction of lithium ions. TBP was used as the extractant. According to the optimization of extraction conditions, NaBPh4 and CH2ClBr were selected as the suitable co-extractant and diluent. Under the optimal extraction conditions (molar ratio of NaBPh4 to Li+ = 2.0, TBP volume fraction = 50%, and R(O/A) = 1.0), the one-stage extraction efficiency of Li+ and Li/Mg separation factor reached up to 87.65% and 2260.71, respectively. Effects of washing and stripping conditions on washing and stripping performances were investigated too. Under optimal conditions of washing and stripping processes, the stripping efficiency of Li+ reached up to 98.84% and Li2CO3 product could be directly obtained in the aqueous phase. Then ten continuous cycles of the whole extraction processes were performed and the results verified that the extraction system showed excellent extraction stability and reusability. The extraction mechanism was deeply studied by using simulation calculation on Materials Studio software and nuclear magnetic resonance characterization. The binding capacity of TBP to metal ions follows the sequence: Li+ > Na+ > K+ > Mg2+. This proposed extraction technology not only avoids the use of acid and alkali, but also reduces the process flow, which has great research potential and industrialization value.

Ethylammonium nitrate enhances the extraction of transition metal nitrates by tri‐ n ‐butyl phosphate ( TBP )

Extraction Equilibrium of Typical Alkali Metals with a Macrocyclic Calixbiscrown Derivative in Two-Phase System HNO3/o-Nitroanisole and HNO3/HCCl3

New Insight into the Partitioning of Minor Actinides I: Extraction of Palladium and Some Typical Metals with A Multidentate Soft-Ligand 2,6-Bis(5,6-dinonyl-1,2,4-triazine-3-yl)pyridine

Enhancing Metal Separations Using Hydrophilic Ionic Liquids and Analogues as Complexing Agents in the More Polar Phase of Liquid–Liquid Extraction Systems

Novel 3-Hydroxy-2-Naphthoate-Based Task-Specific Ionic Liquids for an Efficient Extraction of Heavy Metals

Solution Extraction of Several Lanthanides from Nitric Acid with Isohexyl-Btp in [C N Mim][ntf 2 ] Ionic Liquid

Extraction of Selected Metal Ions with Mixtures of N,N,N’,N’-tetra-n-octyldiglycolamide and 4,4′(5′)-di-t-butylcyclohexano 18-crown-6

Synergistic Extraction of Zn(II) by Mixtures of Tri-Butyl-Phosphate and Trialkyl Amine Extractant

Synergistic solvent extraction system of bis(pyridin-2-ylmethyl) dodecan-1-amine and dinonylnaphthalene for enhanced selective extraction of nickel and cobalt

A Novel Strategy Achieving Enrichment of Metal Values from and into Ammoniacal Solutions

Extraction of lead, copper, and bismuth with mixtures of N,N-di(1-methylheptyl) acetamide and neutral organophosphorus extractants

Extraction of Uranium(VI), Thorium(IV), and Trivalent Rare Earths from Nitric Acid Solutions with {[2-(2-Diphenylphosphoryl)-4-ethylphenoxy]ethyl}diphenylphosphine Oxide

Extraction of Lanthanides from Nitric Acid Solution Using Isobutyl-Btp/Ionic Liquid System

A novel trialkyl phosphate – Ionic liquid mixture for an efficient separation of Lithium ion from its acidic feed solution

The Role of Specific Ion Effects in Ion Transport: The Case of Nitrate and Thiocyanate

Highly selective extraction of lithium ions from salt lake brines with sodium tetraphenylborate as co-extractant

Highly Selective Separation of 99tco4−/reo4− with Rapid Liquid-Liquid Two-Phase Disengagement by Amine-Diamide Ligands

Aliphatic Non-Chelating Aldoximes as the Effective Extractants for Recovery and Separation of Nickel and Cobalt from Halide and Thiocyanate Solutions

Extraction of Alkali Earth Metal Ions from Aqueous Nitric Acid Solutions with TODGA-DHOA in N-Dodecane

Comparative Study of Four Acidic Extractants as Modifiers in the TBP/FeCl 3 Solvent Extraction System for Lithium and Magnesium Separation

Extraction Performance of Eu3+ by Using Heterocyclic N-donor Ligands with Different Structures in Ionic Liquids: an Experimental and Theoretical Study