Abstract:A supervisory Model Predictive Control (MPC) approach is developed for an air path system for multi-mode operation in a diesel engine. MPC is a control method based on a predictive dynamic model of system and determines actuator control positions through the optimization of various factors such as tracking performances of target setpoints, moving speed of actuators, limits, etc. Previously, linear MPC has been successfully applied on the air path control problem of a diesel engine, however, most of these applications were developed for a single operation mode which has only one set of control target setpoint values. In reality, a single operation mode cannot cover all requirements of current diesel engines and this complicates practical implementations of linear MPC. The high priority targets for the development of diesel engines are low emissions, high thermal efficiency and robustness. These objectives require multi-mode operations such as a HP EGR (High pressure exhaust gas recirculation) mode in cold coolant condition, a Double EGR mode for sufficient EGR rates, a Diesel Particulate Filter (DPF) regeneration mode for the heat-up of exhaust gas temperature and a rich mode of exhaust gas for Lean NOx Trap (LNT) regeneration. Each engine operation mode requires different target setpoints from the air path, such as air mass flow rate and oxygen concentration. In the multi-mode operation, simple linearization based MPC is limited in the practical application because a linearization point changes depending on target setpoints of each operation mode. This means that a linear model for a specific operation mode is not valid in other operation modes, which have different target setpoints. Moreover, the modern diesel air path system is highly nonlinear and would require a significant number of linear models to adequately represent the entire behavior not only at all operation points of engine speed and load, but also at the various operation modes. In this study, a new scheme is proposed and tested on a diesel engine utilizing combined benefits of a supervisory MPC and component level nonlinear compensators. The developed nonlinear compensators are based on dynamic real-time inversions of individual component models. The control scheme comprises of three parts: a supervisory MPC as the coordination of target setpoints in high-level to achieve the objectives, a component level control of nonlinear compensator, state observation either by virtual sensor or by Electronic Control Unit (ECU) sensor. The test results from an engine test bench and a chassis dynamometer demonstrates that the proposed method works well in multi-mode operation and can be applied with the significant benefit that no mode specific control strategies and calibration are needed. A valuable benefit of this approach can be seen in the calibration effort, particularly during development when the setpoints are not necessarily fixed.

Neurodynamics-based distributed model predictive control of a low-speed two-stroke marine main engine power system

Robust Dynamic Positioning of Autonomous Surface Vessels with Tube-Based Model Predictive Control

Model Predictive Control with Disturbance Observer for Marine Diesel Engine Speed Control

Multiple Model Predictive Functional Control for Marine Diesel Engine

Enhanced Model Predictive Control for Induction Motor Drives in Marine Electric Power Propulsion System

Neural-Network-Based Predictive Control for PMSM Drives

A fast, fully distributed nonlinear model predictive control algorithm with parametric sensitivity through Jacobi iteration

Barrier Lyapunov function-based adaptive optimized control for full-state and input-constrained dynamic positioning of marine vessels with simulation and model-scale tests

Distributed Model Predictive Control for Consensus of Nonlinear Systems Via Parametric Sensitivity

Sensitivity-based Hierarchical Distributed Model Predictive Control of Nonlinear Processes

Introducing a Deep Neural Network-based Model Predictive Control Framework for Rapid Controller Implementation

Model Predictive Control of Counter-Rotating Motors for Underwater Vehicles Considering Unbalanced Load Variation

Model Predictive Control of an Air Path System for Multi-Mode Operation in a Diesel Engine

Nonlinear Model Predictive Control for Navy Microgrids with Stabilizing Terminal Ingredients

Dynamic Response Control Strategy for Parallel Hybrid Ships Based on PMP-HMPC

Model and Load Predictive Control for Design and Energy Management of Shipboard Power Systems

Direct torque control strategy of permanent magnet synchronous motor used in shipboard power system

Efficient Load Management in Electric Ships: A Model Predictive Control Approach

Integration of predictive and computational intelligent techniques: A hybrid optimization mechanism for PMSM dynamics reinforcement

Distributed Model Predictive Control for Heterogeneous Vehicle Platoon with Unknown Input of Leading Vehicle

Distributed Model Predictive Control for Nonlinear Networked Systems with Asynchronous Communication