Abstract:Tsunamis have caused many severe natural disasters in human history, such as in 2018 at Palu City located in a narrow bay resulting in over 4,340 fatalities. The tsunami propagation characteristics are greatly affected by the water body geometry. For converging geometries such as fjords, bays and estuaries, the interaction between incident tsunamis and lateral boundaries has not been extensively studied. Therefore, the propagation of approximately linear, Stokes, cnoidal and solitary waves are studied numerically in converging, uniform depth water bodies with side angles of 7.5° , 15° , 30° and 45° . Both curved (without sidewall reflection) and straight wave sources (involving sidewall reflection) are used. SWASH, an open-source numerical wave propagation model based on the non-hydrostatic non-linear shallow water equations, is used. For a curved wave source, the wave heights H closely follow Green's law and doubled as the water body width converged to 25% of the original width. However, for wide geometries with a straight wave source, due to reflections from the converging walls, Green's law is inappropriate to predict H . Wave energy can be concentrated on the sides or laterally transferred from stem wave growth and interaction, producing much larger H than predicted by Green's law. The water body width relative to the water depth h is found to have a significant effect on this transformation. Solitary wave amplitudes from 0.100 to 0.623 times h are simulated. An equation is derived for the solitary wave amplitude in a converging water body and an empirical equation is proposed for the prediction of the stem angle. A method for evaluating wave amplification at sidewalls is further presented and compared with the simulation results of this study. Finally, the application of this method is illustrated with an example inspired by the 2018 Palu Bay event. These findings enhance the physical understanding of the effect of the converging water body geometry on tsunami propagation and improve tsunami prediction and hazard assessment.

A model for tsunami flow inversion from deposits (TSUFLIND)

TSUFLIND-EnKF inversion model applied to tsunami deposits for estimation of transient flow depth and speed with quantified uncertainties

TSUFLIND-EnKF: Inversion of Tsunami Flow Depth and Flow Speed from Deposits with Quantified Uncertainties

A Numerical Study of Tsunami Wave Impact and Run-Up on Coastal Cliffs Using a CIP-based Model

Inversion of Tsunamis Characteristics from Sediment Deposits Based on Ensemble Kalman Filtering

Inferring Tsunami Flow Depth and Flow Speed from Sediment Deposits Based on Ensemble Kalman Filtering

GeoClaw-STRICHE: A coupled model for Sediment TRansport In Coastal Hazard Events

Numerical simulation of submarine landslide tsunamis based on the smoothed particle hydrodynamics model

Landslide-induced tsunami simulation based on progressive landslide-shallow water equation coupling model: 1946 Aleutian tsunami case

Numerical Simulation of Tsunami Due to Submarine Landslide Using Extended Boussinesq Equations

A rapid simplified method for determining tsunami inundation extent based on energy conservation

Numerical Implementation of Wave Friction Factor into the 1D Tsunami Shallow Water Equation Model

Simulation of tsunami induced by a submarine landslide in a glaciomarine margin: the case of Storfjorden LS-1 (southwestern Svalbard Islands)

Understanding the tsunami with a simple model

Simulation of floating debris in SPH shallow water flow model with tsunami application

Validation of Linearity Assumptions for Using Tsunami Waveforms in Joint Inversion of Kinematic Rupture Models: Application to the 2010 Mentawai M-W 7.8 Tsunami Earthquake

On the modelling of tsunami generation and tsunami inundation

The Onagawa Benchmark Test

Numerical modelling of tsunami propagation in idealised converging water body geometries

Simulation and Verification of Landslide Tsunamis Using a 3D SPH-DEM Coupling Method

Three-Dimensional Simulations of Subaerial Landslide-Generated Waves: Comparing OpenFOAM and FLOW-3D HYDRO Models