Abstract:Ground penetrating radar (GPR) is considered an effective tool to detect tunnel lining voids. In this paper, an experimental study was carried out using a physical tunnel lining model to evaluate the performances of different antenna frequencies. We built a 4.2 m–long, 4.2 m–wide, and 2.0 m–high experimental model to simulate the secondary lining, initial lining, and surrounding rock of a tunnel structure. In the model, we created four categories of voids, which are voids in secondary and initial linings, a delamination between the secondary and initial linings, a delamination between the initial lining and sand, and a void buried in the sand, to simulate real cases in tunnel engineering. The GPR wave velocities in the sand and concrete of the model were measured using the reflection method for the calibration of void depth. We employed a commercial GPR system equipped with antennae of different centre frequencies to detect the voids. GPR data were processed using a conventional data processing flow, and the performances of different frequencies were examined. The results show that the 1000 MHz centre frequency GPR is capable of characterizing shallow buried voids in the secondary lining but is not able to penetrate into the initial lining. The 250 MHz centre frequency GPR system is not advised to detect voids in or behind tunnel linings due to its low resolving power for voids of centimetre sizes. The 500 MHz centre frequency GPR system is optimal for void detection because it demonstrated a balanced performance of resolving ability and investigation depth. The findings of this work could be useful references for antenna selection and data processing in real GPR applications.

Reverse-time migration of GPR data for imaging cavities behind a reinforced shield tunnel

Lightweight Deep Learning Model for Identifying Tunnel Lining Defects Based on GPR Data

High Precision Imaging of Small Voids in Tunnel Lining Based on Reverse Time Migration

Recent Advances in the GPR Detection of Grouting Defects behind Shield Tunnel Segments

Revers Time Migration Method of Ground Penetrating Radar Based on Gprmax

Application of Air-Coupled Ground Penetrating Radar Based on F-K Filtering and BP Migration in High-Speed Railway Tunnel Detection

Forward Modelling and GPR Imaging in Leakage Detection and Grouting Evaluation in Tunnel Lining

Maxwell curl equation datuming for GPR based on the Kirchhoff integral solution and application in a tunnel grouting test

GPR detection localization of underground structures based on deep learning and reverse time migration

Evaluation of Void Defects behind Tunnel Lining through GPR forward Simulation

Experimental Study on GPR Detection of Voids inside and behind Tunnel Linings

Three-Dimensional Reverse Time Migration of Ground-Penetrating Radar Signals

Imaging Shallow Fault Structures by Three-Dimensional Reverse Time Migration of Ground Penetration Radar Data

Reverse Time Migration Method of Linear Frequency Modulation Ground Penetrating Radar Based on gprMax

Improving reverse time migration of ground-penetrating radar under zero-time imaging conditions using cross-correlation superposition projection

3D prestack reverse time migration of ground penetrating radar data based on the normalized correlation imaging condition

Research on Locating Tunnel-Lining Defects Using Fast Synthetic Aperture Focusing Imaging Based on GPR

GPR Mapping of Cavities in Complex Scenarios with a Combined Time–Depth Conversion

Application of Ground Penetrating Radar in Detection of Tunnel Lining Structure Fracture and Processing Measures

GPR Least-Squares Reverse Time Migration Based on the Improved Cross Correlation Window

Prestack reverse time imaging in tunnels based on the decoupled nonconversion elastic-wave equation