Abstract:Cathode materials play a crucial role in dye-sensitized solar cells (DSSCs). Herein we present the applications of graphene based composites, conductive polymers and metal selenides in DSSCs as the cathode. Monolayer of PDDA/graphene/PDDA/H2PtCl6 is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in DSSC. As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. Close-packed graphene suffers from a low surface area, which limits its electrocatalytic activity as the counter electrode in DSSCs. To solve this problem, we have synthesized a porous graphene/SiO2 nanocomposite converted from graphene oxide mixed with SiO2 nanoparticles through facile hydrazine hydrate reduction. Graphene and graphene/SiO2 films prepared by drop-casting the suspensions onto the conductive glass substrates at room temperature without heat treatment have been applied directly as cathodes in DSSCs. As compared to the nonporous graphene film, the porous graphene/SiO2 composite film demonstrates much better electrocatalytic performance for the reduction of triiodide in DSSCs due to the remarkably enhanced surface area. As a consequence, the incorporation of SiO2 nanoparticles in the graphene film improves fill factor and power conversion efficiency by 65% and 69%, respectively. Oriented polyaniline nanowires array has been successfully grown in situ on conductive glass substrates without templates and applied as the cathode of DSSCs mediated with a Co(bpy) 3+/2+ 3 (bpy = 2,2′-bipyridine) redox couple. As compared to the polyaniline film with a random network, the oriented polyaniline nanowires array exhibits much better electrocatalytic performance, which is even outperforming the typical Pt electrode in both electrocatalytic performance and electrochemical stability when exposed to the acetonitrile solution of Co(bpy) 3+/2+ 3 redox couple. We have also proposed a facile one-step low temperature hydrothermal approach for in-situ growth of metal selenides (Co Se and Ni 1 0.85 0.85Se) on conductive glass substrates. The as-prepared metal selenides on conductive substrates can be used directly as transparent cathodes for DSSCs without any post-treatments. It is found that graphene-like Co0.85Se exhibits higher electrocatalytic activity than Pt for the reduction of triiodide. As a consequence, the DSSC with Co0.85Se generates higher short-circuit photocurrent and power conversion efficiency (9.40%) than that with Pt. These findings provide new routes to fabrication of cheap and efficient counter electrodes for DSSCs.

Water-dispersible polyaniline/graphene oxide counter electrodes for dye-sensitized solar cells: Influence of synthesis route on the device performance

Facile Synthesis of Nitrogen-Doped Reduced Graphene Oxide As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

Enhanced Performance of Dye-Sensitized Solar Cells with Layered Structure Graphitic Carbon Nitride and Reduced Graphene Oxide Modified TiO2 Photoanodes

Graphene oxide sheet-polyaniline nanocomposite prepared through in-situ polymerization/deposition method for counter electrode of dye-sensitized solar cell

α-Fe2O3/Reduced Graphene Oxide Composites as Cost-Effective Counter Electrode for Dye-Sensitized Solar Cells

Serrated, Flexible and Ultrathin Polyaniline Nanoribbons: an Efficient Counter Electrode for the Dye-Sensitized Solar Cell

Nickel selenide embedded polyaniline nanofibers as a counter electrode for high-performance dye-sensitized solar cell

CoS2–graphene Composite As Efficient Catalytic Counter Electrode for Dye-Sensitized Solar Cell

Dually functional, N-doped porous graphene foams as counter electrodes for dye-sensitized solar cells.

Efficient Electrocatalysts for Dye-Sensitized Solar Cells

Adhesion improvement of polyaniline counter electrode in dye-sensitized solar cell using bio-based alkyd

Efficient Dye-Sensitized Solar Cells (DSSCs) via Nitrogen Plasma-Enriched Chitosan@PVA@rGO Blend-Based Counter Electrode Compositions

Scalable low-cost CdS nanospheres@graphene nanocomposites counter electrode for high efficiency dye-sensitized solar cells

FeS2/FeCoS2 nanoparticles/reduced graphene oxide interfacial composite structure as highly reactive counter electrodes in dye-sensitized solar cells

A hierarchical CoFeS2/reduced graphene oxide composite for highly efficient counter electrodes in dye-sensitized solar cells.

Economically Synthesized NiCo2S4/reduced Graphene Oxide Composite As Efficient Counter Electrode in Dye-Sensitized Solar Cell

Nitrogen Doped Porous Graphene As Counter Electrode for Efficient Dye Sensitized Solar Cell

Facile Synthesis of Nis/Graphene Composite with High Catalytic Activity for High-Efficiency Dye-Sensitized Solar Cells

Electron Migration Optimization Through Nanostructural Control of Hierarchical Fe3O4 Based Counter Electrodes for High-Performance Dye-Sensitized Solar Cells

Ultrafine Transition Metal Phosphide Nanoparticles Semiembedded in Nitrogen-Doped Carbon Nanotubes for Efficient Counter Electrode Materials in Dye-Sensitized Solar Cells

Electrospinning Synthesis and Electrocatalytic Performance of Iron Oxide/carbon Nanofibers Composites As a Low-Cost Efficient Pt-free Counter Electrode for Dye-Sensitized Solar Cells