Structure and migration mechanism of thin liquid film in vicinity of advancing contact line

Qiao Liu,Jiachen Huang,Hao Wang,Yajun Deng,,,
DOI: https://doi.org/10.7498/aps.73.20231296
IF: 0.906
2024-01-01
Acta Physica Sinica
Abstract:Thin liquid film near the gas-liquid-solid three phase contact line is the core area of oil and gas production, phase conversion heat and material synthesis systems. Although there are many experimental studies on fluids in the contact line region, the dynamic prediction of contact angle is always difficult, and the bottleneck lies in the special structure of thin liquid film in the contact line region. Because the microstructure of thin liquid film is not well understood, the prediction of dynamic contact angle is always controversial. At present, the main controversial points focus on whether the microscopic contact angle changes with the speed, and whether the microscopic contact angle is the same as the macroscopic contact angle. Therefore, it is crucial to monitor the dynamic process of the microscopic contact Angle in the thin liquid film region of the contact line. In this paper, the wetting system of 50 nm liquid droplets on different solid surfaces was constructed by molecular dynamics simulation, and the structure and migration mechanism of thin liquid films were studied. The structure of the precursor liquid film in the completely wetting droplet advancing contact line region and the nanoscale convex structure in the partially wetting droplet advancing contact line region were obtained. The thickness of the precursor liquid film was 2 to 3 molecular layers, leading the droplet forward movement. However, there was no precursor liquid film in partial wetting system, and the convex nano-bending larger than 10 nm was formed during the wetting process, resulting in the microscopic contact angle. By comparing the difference between the absolute smooth and the actual solid surface dynamic wetting process, the dynamic evolution laws of the micro contact angle and the macro contact Angle with time are obtained for the first time in the simulation. The liquid molecules in the contact line region were tracked and statistically analyzed by means of particle tracer. It was revealed that the liquid molecules in thin liquid film changed from sliding mode to rolling mode with increasing speed under the action of solid surface friction, and then the air entrainment at the bottom of the contact line led to slip and sputtering. The research results are expected to provide theoretical guidance for the following three directions: (1) Improve heat transfer efficiency of micro and nano devices based on wettability control; (2) Improve the imbibition displacement efficiency of shale oil micro-nano matrix based on wettability regulation; (3) Construct universal contact angle prediction model.
physics, multidisciplinary
What problem does this paper attempt to address?